Victron 48V 5000VA EasySolar-II 48/5000/70-50 Inverter/Charger/MPPT 250/100 GX
Victron 48V 5000VA EasySolar-II 48/5000/70-50 Inverter/Charger/MPPT 250/100 GX
5000VA Inverter, 70A Charger, 100A MPPT with GX Monitoring
Key features: Integrated 100A SmartSolar MPPT charge controller, Built-in GX device for system monitoring and control, Pure sine wave 5000VA inverter with 9000W peak power, Dual AC outputs for critical and non-critical loads, PowerControl and PowerAssist features to prevent grid overload.

Detailed view of the internal wiring bay featuring heavy-duty battery terminals, AC input and output terminals, and multiple communications ports for system integration
Highlights:Integrated GX Interface: Ethernet, USB, and VE.Can ports for local networking and VRM cloud connectivity,Solar PV Input: High-voltage M6 studs for direct solar array connection up to 250V,AC Terminals: Secure 16mm2 screw terminals for AC grid input and dual AC outputs,Control Bus: VE.Direct and VE.Bus connection points for Victron accessories and BMS,Cable Glands: Multiple flexible entries for organised routing of power and data cables.


DESCRIPTION
Victron EasySolar-II 48/5000/70-50: Integrated 48V Inverter, Charger, and MPPT for Off-Grid Power
Unified Energy Management for Demanding Off-Grid and Backup Systems
The Victron EasySolar-II 48/5000/70-50 MPPT 250/100 GX consolidates a powerful 5000VA pure sine wave inverter, a 70A adaptive battery charger, and an advanced 100A SmartSolar MPPT charge controller into a single, space-efficient enclosure. By integrating these core components, this all-in-one 48V power hub reduces external wiring, simplifies installation, and minimises potential points of failure—making it an excellent foundation for off-grid solar systems, remote cabins, tiny homes, and critical backup power applications.
Designed for Australian conditions, the EasySolar-II delivers reliable AC power for household appliances, workshop tools, and sensitive electronics. Its integrated GX communication centre provides local and remote monitoring via Wi-Fi, Ethernet, and the Victron Remote Management (VRM) portal, giving you full control over your energy system from anywhere.
Reliable 5000VA Inverter with High Surge Capacity
At the heart of the EasySolar-II is a 5000VA (4000W continuous) inverter that produces clean, stable 230V AC power. This output is suitable for running demanding loads such as air conditioners, water pumps, and kitchen appliances. For equipment with high inrush currents—like compressors or induction motors—the inverter provides up to 9000W peak power, ensuring reliable starts without voltage dips. The PowerAssist feature intelligently supplements limited grid or generator supply with battery power, preventing overload trips and maintaining system stability.
High-Performance MPPT 250/100 Solar Charge Controller
The built-in SmartSolar MPPT 250/100 maximises energy harvest from your photovoltaic array. With a 250V maximum open-circuit voltage and 100A charge current, it can handle up to 5800W of solar input. Victron’s ultra-fast Maximum Power Point Tracking (MPPT) algorithm adapts rapidly to changing light conditions, capturing up to 30% more energy than conventional PWM controllers—particularly beneficial during overcast weather or partial shading. Direct M6 bolt connections for the PV array ensure secure, low-resistance terminations.
Integrated GX Monitoring and Control
The onboard GX device serves as the communication hub, eliminating the need for an external control unit. It features a built-in digital display for real-time system data and supports connectivity via VE.Can, VE.Direct, USB, Ethernet, and Wi-Fi. This enables seamless integration with managed lithium batteries (BMS-Can), Victron accessories, and the VRM portal. Through VRM, you can monitor performance, adjust settings, and receive alerts from any smartphone or computer, providing peace of mind whether you’re on-site or away.
Key Features
- All-in-one integration: Combines inverter, charger, MPPT, and GX control in a single IP21-rated aluminium enclosure, saving wall space and installation time.
- 9000W surge capability: Starts heavy inductive loads with ease, reducing the risk of nuisance tripping.
- Ultra-fast MPPT 250/100: Processes up to 5800W of solar power with 99% peak efficiency for optimal energy yield.
- Comprehensive connectivity: Onboard Wi-Fi, Ethernet, VE.Can, and VE.Direct for BMS integration and remote monitoring via VRM.
- Adaptive 70A charger: Multi-stage charging with temperature compensation extends battery service life.
- Dual AC outputs: Separate connections for critical and non-critical loads, enhancing system flexibility.
Simplified Installation, Reduced Footprint
Traditional off-grid setups require separate mounting and cabling for the inverter, solar charge controller, and monitoring gateway. The EasySolar-II integrates these functions internally, dramatically reducing the physical footprint and the labour associated with external DC wiring and communication cables. The M8 battery bolts provide secure, high-current connections, while the AC screw terminals accommodate up to 16 mm² (approx. 6 AWG) conductors. This streamlined design not only speeds up commissioning but also lowers material costs and potential points of failure.
Built for Australian Off-Grid Environments
Housed in a durable aluminium enclosure (RAL 5012 blue) with IP21 protection, the EasySolar-II is engineered for indoor installation in demanding off-grid settings. Its fan-assisted cooling maintains performance in ambient temperatures from -20°C to +45°C, while the conformally coated electronics resist humidity and dust. The unit’s programmable relay can be configured for generator start/stop, low-battery alarms, or other custom functions, adding a layer of automation to your power system.
Take Command of Your Energy
Whether you’re building a new off-grid residence, upgrading a remote workstation, or designing a resilient backup system, the Victron EasySolar-II 48/5000/70-50 delivers integrated intelligence and dependable performance. Order your EasySolar-II today and experience the simplicity of unified power management with professional-grade Victron engineering.
SPECIFICATIONS
Specifications
| Model | EasySolar-II 48/5000/70-50 MPPT 250/100 GX |
|---|---|
| Inverter/Charger | |
| PowerControl & PowerAssist | Yes |
| Transfer switch | 50A |
| Maximum AC input current | 50A |
| Auxiliary output | 50A |
| Inverter | |
| Input voltage range | 38 – 66V |
| Output voltage | 230 VAC ± 2% |
| Frequency (1) | 50 Hz ± 0.1% |
| Cont. output power at 25°C (3) | 5000 VA / 4000 W |
| Cont. output power at 40°C / 55°C | 3700 W / 3000 W |
| Maximum apparent feed-in power | 4400 W / 5000 VA |
| Peak power | 9000 W |
| Maximum efficiency | 96% |
| Zero load power | 18 W |
| Zero load power in AES mode | 12 W |
| Zero load power in Search mode | 2 W |
| Charger | |
| AC Input voltage range | 187-265 VAC |
| Input frequency | 45 – 65 Hz |
| Charge voltage 'absorption' | 57.6 V (adjustable) |
| Charge voltage 'float' | 55.2 V (adjustable) |
| Storage mode | 52.8 V (adjustable) |
| Maximum battery charge current | 70 A |
| Battery temperature sensor | Yes |
| Programmable relay (5) | Yes |
| Protection (2) | a - g |
| VE.Bus communication port | Yes |
| General purpose com. port | Yes, 2x |
| SmartSolar Charge Controller | |
| Model | MPPT 250/100-Tr |
| Maximum output current | 100 A |
| Maximum PV power | 5800 W |
| Maximum PV open circuit voltage | 250 V |
| Maximum efficiency | 99% |
| Self-consumption | 20 mA |
| Charge voltage 'absorption', default | 57.6 V |
| Charge voltage 'float', default | 55.2 V |
| Protection | a – e |
| General | |
| Interfaces | BMS-Can, USB, Ethernet, VE.Direct, Wi-Fi |
| Remote on-off | Yes |
| Operating temp. range | -20 to +45°C (fan assisted cooling) |
| Max. altitude | 2000 m |
| Humidity (non-condensing) | max 95% |
| Enclosure | |
| Material & Colour | aluminium (blue RAL 5012) |
| Protection category | IP21 |
| Battery-connection | M8 bolts |
| PV connection | M6 bolts |
| 230 VAC-connection | Screw terminals 16 mm² (6 AWG) |
| Weight | 38.6 kg |
| Dimensions (h x w x d) mm | 604 x 323 x 253 |
| Standards | |
| Safety | EN-IEC 60335-1, EN-IEC 60335-2-29, EN-IEC 62109-1, EN-IEC 62109-2 |
| Emission / Immunity | EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3 IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3 |
| Anti-islanding | See our website |
1) Frequency Adjustment: Can be adjusted to 60 Hz
2) Protection Key: a) Output short circuit b) Overload c) Battery voltage too high d) Battery voltage too low e) Temperature too high f) 230 VAC on inverter output g) Input voltage ripple too high
3) Load Handling: Non-linear load, crest factor 3:1
4) Operating Conditions: At 25 °C ambient
5) Programmable Relay: Can be set for general alarm, DC under voltage or genset start/stop function. AC rating: 230 V / 4 A, DC rating: 4 A up to 35 VDC and 1 A up to 60 VDC
| SKU: | VIC-PMP482507010 |
| Barcode: | 8719076049333 |
| Model #: | PMP482507010 |
| MPN: | PMP482507010 |
WARRANTY
Victron Energy Limited Warranty Policy
Direct Customers
Victron Energy provides the following warranty to any direct customer (OEM, distributor or dealer) in relation to any products that Victron Energy has directly sold to the direct customer. This warranty is not an end-user warranty between Victron Energy and an end-user, and end-users shall not have any rights or remedies under this limited warranty towards Victron Energy directly. The direct customer shall, in turn, ensure that the end-user is provided with a warranty identical to this warranty, subject to applicable local mandatory law.
End-Users
Victron Energy may also provide a warranty directly to end-users, in which case the below warranty conditions equally apply to such warranty. In that case, end-users shall claim their warranty at their place of purchase or through the original direct customer of Victron, which can be found through the support section on Victron’s website https://www.victronenergy.com/support. Hence, the direct customer shall on behalf of Victron Energy deal with any warranty claims made under any warranty that Victron Energy may provide directly to end-users. This support section on Victron’s website https://www.victronenergy.com/support will provide further guidance on the procedure for end-users to make a claim under this limited warranty.
If the end-user is a consumer – a natural person who is acting for purposes which are outside that person's trade, business, craft or profession – the following applies. The rights and remedies granted to the consumer under this limited warranty are without prejudice to the consumer’s statutory rights. Furthermore, the consumer is entitled by law to remedies from the seller free of charge in the event of a lack of conformity of the goods (such as repair, replacement, price reduction or rescission), which remedies are not affected by this limited warranty.
Warranty
Victron Energy warrants its products to be free from defects in workmanship and materials for a period of 5 years from the date of purchase by the original end-user, with a maximum of 66 months from the Victron Energy invoice date. Exceptions on this are: lead-acid batteries: 2 years from date of purchase by the original end-user, with a maximum of 30 months from the Victron Energy invoice date, Lithium batteries: 3 years from date of purchase by the original end-user, with a maximum of 42 months from the Victron Energy invoice date. In addition to this, proof of correct battery usage is required when making a battery warranty claim.
For a 10% surcharge on the current net price for products that came with a 5-year warranty, an additional 5 years of warranty can be purchased by Victron’s direct customers, bringing the total warranty to 10 years. Warranty extensions need to be applied for ultimately one year before the expiration of the original term. Victron may ask proof that the product was still functional at the time of purchase of the extended warranty.
During the warranty period, Victron Energy will, at its discretion, repair, replace or (partly) credit the defective product free of charge. The warranty does not include performing or reimbursing de‐installation, transportation, and re‐installation.
This warranty will be considered void if the unit has suffered any physical damage or alteration, either internally or externally, and does not cover damages arising from improper use like:
- Reversed battery polarity.
- Inadequate connection.
- Mechanical shock or deformation.
- Contact with liquid or oxidation by condensation.
- Use in an inappropriate environment (dust, corrosive vapour, humidity, high temperature, biological infestation, etc.).
- Breakage or damage due to lightning.
- Connection terminals and screws destroyed or other damages, like overheating, due to insufficient tightening.
- For any electronic breakage except due to lightning (reverse polarity, over‐voltage due to external cause), the state of the internal control diode and/or the input/output X and Y capacitors determine the warranty.
This warranty will not apply where the product has been misused, neglected, improperly installed, or repaired by anyone other than Victron Energy or one of its authorized Repair Centres. In order to qualify for the warranty, the product must not be disassembled or modified.
This warranty and our warranty obligations thereunder (repair, replacement or credit) are the direct customer’s and, if applicable, the end-user’s sole rights and remedies and our sole obligations with respect to any defective and/or non-conforming product or breach of warranty and is subject to and without prejudice to the limitations of liability in this warranty.
Victron Energy shall not be liable for damages, whether direct, incidental, special, or consequential, even caused by negligence or fault.
As a product requires service, it must be brought back to the place of purchase. In case no contact can be made with the merchant, or if he is either unable or not allowed to provide service, direct contact should be made with Victron Energy through the support section on Victron’s website.
In case Victron Energy replaces a product, it will own the replaced product. Victron Energy owns all parts removed from repaired products. Victron Energy uses new or reconditioned parts made by various manufacturers when performing warranty repairs or building replacement products.
If Victron Energy repairs or replaces a part of a product, its warranty term is not extended: the warranty will apply for the remaining term of the original warranty term. For example, if Victron Energy replaces a product with a 5-year warranty after 3 years, the warranty of this product will apply for another 2 years, with a minimum of 6 months.
All remedies and the measure for damages are limited to the above. Victron Energy shall in no event be liable for consequential, incidental, contingent or special damages, even if having been advised of the probability of such damages.
The foregoing limited warranty provided by Victron Energy is in lieu of any other warranties, express or implied arising by law, course of dealing, course of performance, usage of trade or otherwise, of any kind whatsoever including, without limitation, warranties of merchantability or fitness for a particular purpose, with respect to any product. The above is without prejudice to the arrangement for consumers detailed above.
Life Support Policy
As a general policy, Victron Energy does not recommend the use of any of its products in life support applications where failure or malfunction of Victron Energy's product can be reasonably expected to cause the failure of the life support device or to significantly affect its safety or effectiveness. Victron Energy does not recommend the use of any of its products in direct patient care. Victron Energy will not knowingly sell its products for use in such applications unless it receives in writing assurances satisfactory to Victron Energy that the risks of injury or damage have been minimized, the customer assumes all such risks, and the liability of Victron Energy is adequately protected under the circumstances.
Warranty on repairs for products outside their warranty period
The warranty period on products that are outside their warranty period and have been repaired by Victron Energy or one of the Victron Energy Repair centres is six (6) months from delivery. The same applies to spare parts and circuit boards that have been supplied or repaired by Victron Energy.
Transport
It is the responsibility of the sender to sufficiently package these products. The transport must be organized in a way to avoid any damage, especially when a single unit or heavy unit is sent.
Severability
If a part of the terms and conditions of this warranty is held invalid, void or unenforceable due to any particular national or international legislation, it shall not affect other parts of the terms and conditions of this warranty.
Applicable law
This warranty is exclusively governed by the laws of the Netherlands, to the exclusion of the UN Convention on Contracts for the International Sale of Goods.
Contact details
Victron Energy B.V. | De Paal 35, 1351 JG Almere, The Netherlands | https://www.victronenergy.com/support




















































