Australian Owned & Operated Family BusinessAustralian Family Business
Before & After Sales SupportBefore & After Sales Support
10+ Years Solar Industry ExperienceA Decade of Industry Experience
High Quality Green ProductsHigh Quality & Sustainable Products
Fast ShippingFast Dispatch
Great Prices and Price Match GuaranteePrice Match Guarantee
Large Range of DIY KitsRange of DIY Kits

Battery Monitors

Shunt-based battery monitors with Bluetooth or display readouts for precise state-of-charge tracking off-grid.

Total: 21 Products

Shunt Battery Monitors for Caravan, Marine and Off-Grid Systems

A battery monitor shows how much energy is left in your battery bank. A voltage reading can only estimate this. A shunt battery monitor measures the current flowing into and out of the battery. From that current it calculates state of charge, amp-hours consumed and time remaining. This collection covers Bluetooth shunts, display-based monitors and high-current system shunts from Victron, Enerdrive and Votronic. They suit 12V lithium and lead-acid setups in caravans, RVs, 4WDs, boats, tiny homes and off-grid installations.

Choosing the Right Battery Monitor

Three things narrow the choice: how you want to read the data, how much current the system handles, and where the shunt will be mounted.

  • Bluetooth shunt monitors: The Victron SmartShunt is available in 300A, 500A, 1000A and 2000A ratings. It sends battery data to the VictronConnect app on your phone or tablet, so no wall display is needed.
  • IP65 SmartShunt options: Each SmartShunt rating also comes in a waterproof IP65 version. These suit under-bonnet, engine bay and exposed marine locations.
  • Display battery monitors: The Victron BMV-700 and BMV-702 have a panel-mount screen. The BMV-702 adds an auxiliary input. The Smart BMV-712 combines the display with Bluetooth access and comes in grey or black.
  • High-voltage monitoring: The Victron BMV-710H Smart is designed for high-voltage battery banks.
  • Lynx and high-current systems: The 1000A Lynx Shunt VE.Can is available with M8 or M10 studs and fits Lynx distribution builds. The 6000A shunt with BMV PCB is a shunt only, with no monitor included. It suits very large commercial and industrial banks.
  • Alternative brands: Enerdrive offers the ePro Battery Monitor and the SC301 300A active shunt for the PICO monitor. Votronic offers the 200S and 400S monitors, each with a remote display.

Why Fit a Shunt Battery Monitor?

Accurate state-of-charge data helps you manage loads and avoid deep discharges. It also shows whether your solar, DC-DC and mains charging are keeping up with daily use. If you run lithium batteries, correct monitor settings matter. Our guide to programming Victron BMV and SmartShunt monitors for lithium batteries explains the key parameters. Monitoring is one part of a wider battery management system. Many installers pair a monitor with a low voltage disconnect so loads are switched off automatically before the battery is over-discharged.

Installation and Setup Considerations

All loads and charging sources must pass through the shunt for the readings to be accurate. Choose a shunt rating above your highest expected continuous current, including inverter loads. Fit the waterproof IP65 SmartShunt where moisture or road spray is likely. Confirm the stud size (M8 or M10) on Lynx Shunt models against your existing busbars and lugs. Before relying on state-of-charge readings, enter your battery capacity and chemistry settings in VictronConnect or on the monitor itself.

Choose a battery monitor from the range above to see exactly how much power you have before your next trip or time on the water.

Add notes to your order

Powering Your Adventure

We gave it full sun... ☀️

Official Pricing Reference