Dual Battery Solar Controllers
Charge start and house batteries from one solar array with Victron's 12/24V PWM DUO controller.
Dual Battery Solar Charge Controllers for Start and House Batteries
A dual battery solar charge controller lets one solar array charge two separate battery banks. The usual pairing is a starting battery and an auxiliary or house battery. You avoid running two regulators, simplify wiring, and keep your cranking battery topped up while the vehicle, caravan or boat sits idle.
This collection features the Victron 12/24V 20A BlueSolar PWM-LCD&USB (DUO Dual Battery) Solar Charge Controller. It is a compact, proven option for mobile and small off-grid systems that need to keep two batteries charged from the same panels.
Why Choose the Victron BlueSolar PWM DUO
The BlueSolar PWM DUO combines dual battery charging with a built-in LCD display and USB output in one unit. It suits caravans, motorhomes, campervans, boats, 4WD touring set-ups and small off-grid sheds where a second battery bank needs reliable solar support.
- Two battery outputs: charges a start battery and a house battery from one solar input.
- 12V or 24V systems: rated for 12/24V battery banks, with up to 20A of solar charge current.
- Integrated LCD: lets you check charging status at a glance without extra monitoring hardware.
- USB output: provides a handy charging point for phones and small devices.
- PWM regulation: offers simple, dependable charging control that pairs well with nominal 12V panels on 12V systems.
PWM or MPPT for a Dual Battery Set-Up?
PWM controllers work best when the panel voltage closely matches the battery voltage. A typical example is a standard 12V panel charging a 12V battery. If you plan to run higher voltage panels, or you want to get more energy from a limited roof area, compare this unit against our MPPT solar charge controllers. Many installers pair a single-output MPPT with a separate DC-DC charger for the start battery.
For a full breakdown of regulator types, current ratings and panel matching, read our guide to choosing the right solar charge controller.
Compatibility Notes
Before you buy, confirm that your system voltage is 12V or 24V and that your total panel current stays within the 20A rating. Keep panel open-circuit voltage within the controller's specified input limits. Check the product specifications for supported battery chemistries before connecting lithium or other non-lead-acid banks.
Size your cabling for the full charge current and fit appropriate fuses or circuit breakers on each battery output. Mount the controller in a dry, ventilated location close to the batteries. If you are comparing other low-cost, straightforward regulators, browse the wider range of PWM solar charge controllers.
Keep both your start and house batteries charged from a single solar array. Order the Victron BlueSolar PWM DUO today for a tidy, dependable dual battery solar solution from a trusted brand, ready for your next trip away.







Pre-Wired Boards
4x4/Canopy Power Systems
Solar Kits
Inverter Kits
Charger Kits
Battery Kits
Monitoring Kits































