12V to 12V DC-DC Converters
Regulated 12V output for sensitive loads, with isolated and high-current buck-boost options to 100A.
Stable, Regulated 12V Power for Mobile and Off-Grid Systems
A 12V to 12V DC-DC converter takes a battery or alternator supply that varies in voltage and delivers a steady, regulated 12V output to your loads. In a Victron 12V system on a caravan, motorhome, 4WD canopy, boat or truck, battery voltage falls during discharge and rises during charging. A dedicated 12V DC regulator keeps that variation away from sensitive electronics. This collection covers two Victron product families: the Orion-Tr isolated converters and the high-current Buck-Boost DC-DC converters.
Victron Orion-Tr 12/12 Isolated Converters
The Orion-Tr 12/12 range is available in 9A, 18A and 30A models. As isolated DC-DC converters, they provide galvanic separation between input and output. This helps break ground loops and reduce electrical noise on circuits that carry radios, audio or navigation equipment. They suit marine installations and any build where a separate, clean 12V supply is needed for specific equipment.
Victron 12/24V Buck-Boost DC-DC Converters
For higher current, the Victron Buck-Boost converters are offered in 25A, 50A and 100A capacities. A buck-boost design can step the input voltage down (buck) or up (boost) to hold a set output, and these units work across 12V and 24V systems. Their configurable output makes them a good fit for demanding mobile setups and for auxiliary battery applications where precise voltage control matters. If your vehicle runs a 24V electrical system, also see our 24V to 12V DC-DC converters.
Common Applications
- Voltage stabilisation: Steady supply for LED lighting, 12V screens and control electronics as the house battery depletes.
- Marine noise reduction: An isolated 12V to 12V converter helps keep interference away from VHF radios, sounders and navigation gear.
- Communications and telemetry: Regulated 12V for routers, modems and remote monitoring equipment in off-grid, commercial and industrial sites.
- High-current regulation: Buck-Boost models for larger loads in trucks, buses, 4WDs and RVs.
Sizing and Selection Tips
Start by adding up the continuous current of every device the converter will supply, then choose a model with comfortable headroom above that figure. The Orion-Tr 9A and 18A suit individual devices or small circuits, while the 30A model covers larger groups of loads. Above 30A, or where you need flexible step-up and step-down control, the 25A, 50A and 100A Buck-Boost units are the logical choice.
Next, decide whether you need isolation. Choose an isolated Orion-Tr where ground loops, electrical noise or separated negative circuits are a concern, particularly on boats. If you are unsure which topology suits your build, our guide to isolated vs non-isolated converters and DC-DC chargers explains the differences in detail.
Protect your sensitive 12V equipment with a properly sized Victron converter. Compare the Orion-Tr and Buck-Boost models above, match the current rating to your loads, and order the right 12V to 12V regulator for a stable, well-protected power system.







Pre-Wired Boards
4x4/Canopy Power Systems
Solar Kits
Inverter Kits
Charger Kits
Battery Kits
Monitoring Kits









































