Enerdrive Battery Chargers

Enerdrive ePower Mains Battery Chargers

Enerdrive ePower battery chargers are 240V AC mains chargers for deep cycle house batteries in caravans, RVs, boats, trucks and off-grid systems. This collection covers 12V, 24V and 48V models from 20A to 100A, plus the remote and temperature sensor that complete an ePower installation. Each charger is built for permanent mounting, so your battery bank stays charged whenever shore power, a generator or mains supply is connected.

The Enerdrive ePower Range at a Glance

• 12V Multi-Bank ePower chargers: 20A, 40A, 60A and 100A models for caravans, motorhomes, 4WD campers and boats running a 12V house bank.
• 24V ePower chargers: a 24V 30A Multi-Bank model for marine and truck systems, and a 24V 30A Industrial model for commercial and fixed installations.
• 48V ePower Industrial charger: a 48V 35A unit for larger off-grid, tiny home and industrial battery banks.
• Charger remote: suits the AC20, AC30, AC40, AC60 and AC100 models and includes a 7.5m cable, so you can monitor and control the charger from a cabinet, helm or living area.
• Replacement temperature sensor: suits ePower AC and DC chargers and lets the charger adjust charging to battery temperature.

How to Choose an Enerdrive Charger

Match the system voltage first. The charger must match your battery bank: 12V for most caravans and campers, 24V for many boats and trucks, and 48V for larger off-grid and commercial systems.

Size the charge current to the bank. A 20A charger suits smaller banks and maintenance charging. The 40A and 60A models cover typical touring setups. The 100A unit suits large lithium or AGM banks where you want shorter charge times on generator or shore power. Always confirm that the charge current is within your battery manufacturer's recommended limits.

Consider multi-bank outputs. The Multi-Bank ePower models can charge more than one battery from a single unit. That is useful when a boat or motorhome has separate house and start batteries. If you are comparing other brands, see our multi-bank battery chargers.

Check the battery chemistry. Before installing, set the charge profile to suit your lithium, AGM or other battery type. Our guide to charging LiFePO4 batteries with a lead-acid charger explains why the correct profile matters.

Plan for control and sensing. Add the remote if the charger will be mounted out of sight. Fit a temperature sensor when the batteries sit in a hot engine bay, locker or enclosure. For mounting hardware and connectors, browse battery charger accessories.

Please note that this collection contains AC mains chargers and their accessories only. DC-DC chargers and inverter chargers are not part of this range.

Choose the Enerdrive ePower charger that matches your voltage and battery bank size, and add a remote or replacement sensor in the same order. If you are unsure which model suits your system, contact our team with your battery specifications before you buy and we will help you size it correctly.