Battery Cables
Heavy-duty flexible battery and welding cable from 35mm² to 95mm², sold by the metre or roll.
Flexible Battery and Welding Cable for High-Current DC Systems
Battery cable carries the highest currents in any 12V or 24V system. It links batteries to inverters, busbars, isolators, DC-DC chargers and parallel battery banks. This collection covers heavy-duty flexible battery and welding cable in four cross-sections: 35mm², 50mm², 70mm² and 95mm². Each size is sold by the metre for custom runs or on full rolls for larger installations.
Welding cable is built for repeated flexing on arc welder leads. That flexibility also makes it well suited to battery wiring. It bends around tight corners in caravan battery boxes, under-bonnet 4WD layouts and boat engine bays, and it puts less strain on lugs and terminals than stiffer cable.
Choosing the Right Battery Cable Size
Correct cable size depends on continuous current, run length (positive plus negative) and acceptable voltage drop. Undersized cable runs hot and wastes energy. It can also cause inverters to shut down under load. Before you order, work out the size with our DC cable sizing and system wiring calculator.
- 35mm² (close to 2 AWG): dual battery links, DC-DC charger feeds, moderate inverter runs and shorter welder leads.
- 50mm² (close to 1/0 AWG): mid-sized inverters, battery-to-busbar connections and longer dual battery runs in 4WDs and trucks.
- 70mm² (close to 2/0 AWG): larger 12V inverters, lithium battery banks and high-current marine circuits.
- 95mm² (close to 3/0 AWG): high-output inverter and battery bank interconnects in off-grid, tiny home and commercial systems.
AWG equivalents are approximate. Always size to the mm² rating.
By the Metre or By the Roll
If you are fitting out a single caravan, RV or boat, battery cable by the metre lets you order the exact lengths you need for positive and negative runs. Installers, auto electricians and fleet workshops can choose full rolls instead: 500m of 35mm², or 250m of 50mm², 70mm² or 95mm².
Frequently Asked Questions
Can welding cable be used as battery cable?
Yes. Flexible welding cable is widely used for battery-to-battery cables, inverter feeds and dual battery systems because it routes easily and handles high current. Make sure the cross-section suits your current and run length.
What size cable do I need for a 12V inverter?
It depends on the inverter's continuous draw and the cable length. Larger inverters on longer runs often need 50mm² to 95mm². Use the calculator above to confirm.
What do I need to terminate battery cable?
You need correctly sized crimp lugs, a suitable crimp tool and adhesive-lined heat shrink. Lugs and busbars are available in our connectors, busbars and terminals range.
Is this cable suitable for arc welder leads?
Its flexible construction suits welder lead applications. Check that the cable size matches your welder's output current and lead length.
Build a Safer, More Efficient DC System
Start with the right cable size for a cooler-running, lower-loss installation. Select your size, choose metre lengths or a full roll, and order today to start your caravan, 4WD, marine or off-grid wiring project.







Pre-Wired Boards
4x4/Canopy Power Systems
Solar Kits
Inverter Kits
Charger Kits
Battery Kits
Monitoring Kits
































