Carling
Resettable Carling A-Series flat and C-Series rocker circuit breakers, rated from 2.5A to 70A.
Carling Circuit Breakers for DC Power Systems
Carling circuit breakers provide resettable overcurrent protection for the DC circuits in boats, caravans, RVs, 4WDs, trucks and off-grid installations. This range includes the A-Series flat circuit breaker in nine current ratings from 2.5A to 50A. It also includes a 70A C-Series rocker circuit breaker for higher-current feeds. You can match the protection to each individual load instead of relying on a single large device.
A blown fuse has to be replaced. A tripped breaker can be reset once the fault has been cleared. This makes Carling breakers well suited to switch panels, distribution boards and other locations where quick fault recovery matters, such as on the water or at a remote campsite. If you are still deciding between the two protection methods, our guide DC circuit breaker or fuse explains the trade-offs.
Carling A-Series and C-Series at a Glance
- A-Series flat circuit breakers: available in 2.5A, 5A, 10A, 15A, 20A, 25A, 30A, 40A and 50A ratings. They cover everything from low-draw electronics and lighting through to pumps and fridges.
- C-Series rocker circuit breaker (70A): a rocker-actuated breaker for heavier circuits such as main feeds and higher-draw appliances.
- Resettable protection: after a trip, you can restore the circuit once the cause has been identified. You do not need to carry spare fuses for every rating.
- Consistent family styling: using one brand and series across a panel keeps the layout tidy and the ratings easy to identify.
Typical Applications
Carling breakers are commonly specified for marine switch panels and engine bay circuits. They are also used for caravan and RV 12V distribution, and for 4WD auxiliary battery systems running fridges, lighting and compressors. Truck and commercial vehicle fit-outs use them too, as do off-grid cabins and tiny homes where several DC loads are fed from a battery bank.
How to Choose the Right Carling Breaker
Start with the circuit, not the appliance alone. Follow these steps:
- Check the cable size: the breaker rating should protect the cable on that circuit. Do not choose a rating above what the cable can safely carry.
- Check the load: identify the continuous current draw of the connected equipment. Select a rating that sits above normal operating current but within the cable's limit.
- Select the series: use the A-Series flat breakers for individual branch circuits up to 50A. Step up to the C-Series 70A rocker breaker for heavier feeds.
- Plan the panel: allocate one breaker per circuit so that a fault on one load does not shut down the rest of the system.
Choose the Carling rating that matches each circuit and add it to your cart. You will get dependable, resettable protection for your next marine, caravan or off-grid build.







Pre-Wired Boards
4x4/Canopy Power Systems
Solar Kits
Inverter Kits
Charger Kits
Battery Kits
Monitoring Kits



































