6B&S (13.51mm²) Red Single Core Automotive Cable per Metre
6B&S (13.51mm²) Red Single Core Automotive Cable per Metre
98A Rated (AS/NZS 3008, Free Air 40°C), Plain Copper, V90HT PVC, Max 120V DC
View all products from Key

DESCRIPTION
6 B&S (13.51mm²) Red Single Core Automotive Cable: High-Current Wiring for 12V, 24V, and 48V Systems
Engineered for Demanding Automotive and Low-Voltage Applications
This 6 B&S (13.51mm²) red single core cable delivers reliable power in 12V, 24V and 48V DC systems, with a voltage rating of 120V DC / 50V AC (not for mains connection). Australian made by KEY from plain copper conductors to AS/NZS 1125, it keeps voltage drop low across critical connections. Its red V90HT heat-resistant PVC insulation suits engine bays and under-vehicle runs.
Rated 98A to AS/NZS 3008.1.1 (two single-core cables spaced in free air at 40°C ambient), it suits high-demand circuits such as dual battery systems, inverter supply lines, winch feeds and solar charge controller connections in caravans, 4WDs and boats. The fine 168/0.32mm stranding keeps it flexible through tight spaces.
*Derating factors apply for bundled cables, enclosure and higher ambient temperatures. Use our cable sizing calculator for your installation.
Key Features
- Rated 98A in free air at 40°C (AS/NZS 3008.1.1); derate when bundled or enclosed
- 13.51mm² (6 B&S): 168 strands of 0.32mm plain copper to AS/NZS 1125
- Red V90HT PVC insulation
- 120V DC / 50V AC voltage rating, suits 12V, 24V and 48V systems
- Australian made
Why Quality Cable Matters
In low-voltage DC systems, undersized or inferior cables can cause significant voltage drop, leading to underperforming equipment, battery charging issues, and potential safety hazards. This 6 B&S cable, with its low electrical resistance of 1.4 ohm/km at 20°C, helps maintain system efficiency and reduces heat buildup under load. Unlike generic alternatives that may use copper-clad aluminium, this cable is plain copper throughout for long-term reliability.
Applications
Ideal for a wide range of automotive and off-grid energy projects:
- Dual battery isolator and management systems
- High-current alternator and starter motor wiring
- Inverter and DC-DC charger connections
- Solar panel to regulator cabling
- Winch and compressor power supply
- General low-voltage wiring in caravans, motorhomes, and boats
Installation Notes
Choose the cable size from your system's current and allowable voltage drop; our cable sizing calculator works this out for your run. Always use quality crimp terminals and consider protective conduit when routing through metal panels or high-abrasion areas. The 98A rating applies to cables spaced in free air at 40°C, so derate when cables are bundled, enclosed or in hotter locations. Consult a qualified auto electrician for complex installations.
Power Your Project with Confidence
Equip your vehicle or off-grid setup with a cable that matches the demands of modern electrical systems. Order your 6 B&S red single core automotive cable by the metre today and ensure your power delivery is as robust as the rest of your build.
SKU: Key-KABC1192030RD1
SPECIFICATIONS
Specifications
Conductor: plain copper to AS/NZS 1125. Insulation / sheath: V90HT PVC. Voltage rating: 120V DC / 50V AC – not for mains connection.
This listing is the highlighted row. Source: KEY Battery Cable Spec Sheet F181a-1 (July 2026); AMP ratings per the note below.
| Part No. | Size B&S | No. of Cores | Conductor No. / Dia. (mm) | Nominal Area (mm²) | Insulation Thickness (mm) | Electrical Resistance at 20°C (ohm/km) | Nominal O.D. (mm) | **AMP Rating (free air, 40°C) |
|---|---|---|---|---|---|---|---|---|
| KABC1112030 | 8 | 1 | 96/0.32 | 7.72 | 0.9 | 2.4 | 5.5 | 69 |
| KABC1192030 | 6 | 1 | 168/0.32 | 13.51 | 1.1 | 1.4 | 7.0 | 98 |
| KABC1287030 | 4 | 1 | 252/0.32 | 20.27 | 1.1 | 0.9 | 8.7 | 127 |
| KABC1364030 | 3 | 1 | 329/0.32 | 26.46 | 1.6 | 0.7 | 10.6 | 152 |
| KABC1455030 | 2 | 1 | 399/0.32 | 32.09 | 1.7 | 0.6 | 11.7 | 172 |
| KABC1492032 | 1 | 1 | 492/0.32 | 39.57 | 1.7 | 0.5 | 12.4 | 197 |
| KABC1609032 | 0 | 1 | 608/0.32 | 48.90 | 1.7 | 0.4 | 13.7 | 227 |
| KABC1912030 | 2/0 | 1 | 798/0.32 | 64.18 | 1.7 | 0.3 | 14.9 | 274 |
| KABC11204030 | 3/0 | 1 | 1035/0.32 | 83.24 | 2.0 | 0.23 | 17 | 323 |
| KABC2T11230 | 8 | 2 | 96/0.32 | 7.72 | 0.9 | 2.4 | 7.6 x 13.1 | 64 |
| KABC2T19230 | 6 | 2 | 168/0.32 | 13.51 | 1.1 | 1.4 | 9.1 x 16.0 | 92 |
| KABC2TW28703 | 4 | 2 | 252/0.32 | 20.27 | 1.1 | 0.9 | 10.8 x 19.4 | 118 |
** AMP rating: AS/NZS 3008.1.1 value in free air at 40°C ambient (single core: two cables spaced in free air; twin core: one cable in free air), with the V90HT PVC insulation rated at 90°C, interpolated for each conductor size. Derating factors apply for bundled cables, enclosure and higher ambient temperatures. Use our cable sizing calculator for your installation.
| SKU: | Key-KABC1192030RD1 |
| Model #: | KABC1192030-RD |
| MPN: | KABC1192030-RD |
| HS code: | 8544493080 |
| Country of origin: | AU |
| Package weight: | 0.1 kg |
| Package length: | 0.02 m |
| Package width: | 0.02 m |
| Package height: | 0.02 m |







Pre-Wired Boards
4x4/Canopy Power Systems
Solar Kits
Inverter Kits
Charger Kits
Battery Kits
Monitoring Kits



































