Blue Sea 12/24V 120A SI Series Automatic Charging Relay
Blue Sea 12/24V 120A SI Series Automatic Charging Relay
Dual-Sensing VSR with Start Isolation & Ignition Protection

DESCRIPTION
Automated Dual-Battery Management for Marine and Off-Grid DC Systems
Managing multiple battery banks in a marine vessel, caravan, or 4WD setup requires precise control to prevent a depleted starter battery. The Blue Sea SI Series Automatic Charging Relay (ACR) offers a dependable, automated solution for 12V and 24V DC electrical systems. Functioning as an intelligent voltage sensitive relay (VSR), this unit automatically combines battery banks during charging cycles and isolates them when discharging begins. This ensures your starting battery remains fully charged and isolated from house loads when the engine or auxiliary charger is turned off.
Intelligent Dual-Sensing Operation
Unlike basic single-sensing isolators that only monitor the cranking battery, this dual-sensing ACR monitors voltage on both battery terminals. Whether your system is receiving power from a 120A engine alternator on the start side or a shore power charger and solar regulator on the house side, the relay detects the voltage rise and bridges the banks to distribute the charge efficiently. Once charging stops and voltage drops, it automatically opens the circuit to keep the banks strictly separated.
Start Isolation Protects Sensitive Electronics
Cranking a marine or automotive engine draws heavy current, which can cause significant voltage sags and spikes across the electrical network. The SI Series incorporates a dedicated Start Isolation (SI) feature. When wired to the ignition switch, the relay temporarily isolates house loads from the engine circuit during cranking. This prevents sensitive onboard electronics, such as marine chartplotters, fish finders, and communication radios, from resetting or sustaining damage due to sudden voltage drops.
Key Features and Benefits
- Dual-Sensing Technology: Automatically combines batteries when charging is detected on either bank and isolates them during discharge.
- Integrated Start Isolation: Temporarily disconnects house loads during engine cranking to shield sensitive electronics from voltage sags and spikes.
- High-Output Support: Rated for 120A continuous operation, making it suitable for modern high-output alternators up to 120A.
- Auto-Ranging Voltage Input: Automatically detects and adjusts to 12V or 24V DC architectures without manual configuration.
- Marine-Grade Ignition Protection: Hermetically sealed, vapourproof contacts ensure safe installation aboard petrol and diesel-powered boats.
- Heavy-Duty Terminations: Features robust 3/8"-16 (Approx. M10) stud terminals designed to accommodate 1/0 AWG (approx. 50mm2) cables for minimal voltage drop.
- Built-In Voltage Lockouts: Prevents the relay from combining into a severely depleted battery (under-voltage lockout) or passing dangerously high voltages (over-voltage lockout).
Engineered for Harsh Environments
Inferior battery isolators often suffer from contact corrosion, high voltage drop, or premature failure under sustained high-amperage loads. The Blue Sea SI-ACR mitigates these risks with hermetically sealed contacts that are completely impervious to moisture, salt spray, and fuel vapours. Because it is ignition protected, it meets strict safety standards for installation in the engine rooms of petrol-powered vessels. Furthermore, for users wanting dashboard monitoring, the relay supports an optional remote LED indicator (sold separately) to display real-time relay status.
Upgrade Your Dual-Battery System
Ensure your starting battery is always ready and your onboard electronics remain protected. Integrate the Blue Sea 12/24V 120A SI Series ACR into your marine, RV, or off-grid power system for reliable, hands-free battery management.
SPECIFICATIONS
Specifications
| SI-ACR Automatic Charging Relay – 12/24V DC 120A | |
|---|---|
| Nominal Voltage | 12V DC; 24V DC |
| Start Isolation | Yes |
| Amperage Operating Current | 175mA (Combine); 15mA (Open) |
| Terminal Stud Torque | 140 in-lb (15.82 Nm) |
| Continuous Rating | 120A |
| Intermittent Rating | 210A (5 min) |
| Cable Size to Meet Ratings | 1/0 AWG |
| Terminal Ring Diameter Clearance | 1.12in (28.45 mm) |
| Terminal Stud Length | 0.875in (22.23 mm) |
| Terminal Stud Size | 3/8″ – 16 (M10) |
| Combine 30 sec | 13.6V @ 12 V; 27.2V @ 24 V |
| Combine 90 sec | 13.0V @ 12 V; 26.0V @ 24 V |
| Open 10 sec | 12.35V @ 12 V; 24.7V @ 24 V |
| Open 30 sec | 12.75V @ 12 V; 25.5V @ 24 V |
| Open High | 16.0V @ 12 V; 30.0V @ 24 V |
| Over Voltage Lockout | 16.0V @ 12V; 32.0V @ 24V |
| Under Voltage Lockout | 9.5V @ 12 V; 19V @ 24 V |
| Weight | 0.57 kg |
| SKU: | BS-7610B |
| Model #: | SI-ACR |
| MPN: | SI-ACR |
| HS code: | 8536410050 |
| Country of origin: | MX |
| Package weight: | 0.684 kg |
| Package length: | 0.11 m |
| Package width: | 0.1 m |
| Package height: | 0.1 m |
WARRANTY
Blue Sea Warranty Policy
Blue Sea Systems products sold by us are supplied with a warranty against defects for the warranty period shown below, subject to the product type, application and the terms of this warranty policy.
The express warranty provided by us is limited to a maximum of 5 years from the original date of purchase, unless otherwise required under Australian Consumer Law.
Blue Sea Systems may offer longer manufacturer support on some products at their discretion
Warranty Lengths by Product Range
| Blue Sea Product Range | Warranty Length | Application / Notes |
|---|---|---|
| Most Blue Sea Systems Products | 5 years | Applies to most Blue Sea Systems products found to be defective in materials or manufacture. |
| P12 Battery Chargers | 5 years | Warranty period starts from the original date of purchase. |
| P12 Remote Displays | 5 years | Warranty period starts from the original date of purchase. |
| Digital Meters | 3 years | Warranty period starts from the original date of purchase. |
| Vessel System Monitors | 3 years | Warranty period starts from the original date of purchase. |
Warranty Assessment and Remedy
If a Blue Sea Systems product is found to be defective in materials or manufacture within the applicable warranty period, we will, at our discretion, arrange a repair, replacement, store credit or refund, depending on the nature of the fault and the requirements of Australian Consumer Law.
Products may need to be returned for assessment before a warranty claim can be approved. Where required, the product must be returned with dated proof of purchase and a clear description of the fault.
Labour costs for removing, replacing, reinstalling or diagnosing a product are not covered by this express warranty unless otherwise required under Australian Consumer Law.
Making a Warranty Claim
To make a warranty claim, please contact us with your dated proof of purchase, product details and a description of the fault.
The product may need to be returned for inspection before the claim can be assessed. If the product is confirmed to be faulty and covered by this warranty, we will advise the available remedy.
What This Warranty Does Not Cover
This warranty does not cover faults or damage caused by incorrect installation, incorrect application, misuse, abuse, neglect, unauthorised modification, accidental damage, normal wear and tear, environmental damage, or failure to use the product in accordance with the manufacturer's instructions.
- Incorrect installation or wiring
- Incorrect product selection or application
- Misuse, abuse or neglect
- Physical or accidental damage
- Water ingress or environmental damage outside the product's intended use
- Unauthorised modification or repair
- Normal wear and tear
- Labour costs for removal, replacement, reinstallation or diagnosis
- Freight, travel or call-out costs unless otherwise required by law
- Products not returned for assessment when reasonably required
Manufacturer Support
Blue Sea Systems may provide additional manufacturer support on some products beyond the warranty period listed above. Where available, we may assist customers in contacting the manufacturer, but any manufacturer support beyond the express warranty period is subject to the manufacturer's own terms and continued availability.
Australian Consumer Law
This warranty is in addition to other rights and remedies available at law. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.







Pre-Wired Boards
4x4/Canopy Power Systems
Solar Kits
Inverter Kits
Charger Kits
Battery Kits
Monitoring Kits





































