Cables
Solar, battery, automotive and marine cable plus connectors, lugs and busbars for 12V to 48V wiring
Cables, Connectors and Wiring Parts for 12V, 24V and 48V Systems
This range covers the cable and termination parts needed to wire caravans, RVs, 4WDs, boats, trucks and off-grid sheds. You can buy cable by the metre or by the roll. You will also find the connectors, lugs, busbars and protection products that turn cable into a safe, tidy installation.
What You Will Find in This Range
- Solar cable and MC4 connectors: 4mm² twin 1000V PV1-F and 6mm² twin 1500V IEC 62930 solar cable, solar extension leads from 1m to 10m, Stäubli MC4 and MC4 Evo 2 connector pairs, bulkhead connectors and 'h' and 'Y' branch joiners. The full selection is in our solar cables range.
- Automotive and battery cable: single and twin core automotive cable from 3mm through to 2B&S (32mm²), plus flexible battery cable in 35mm², 50mm², 70mm² and 95mm². Pre-made 300mm, 600mm and 1000mm battery leads and parallel cable pairs are also available.
- Marine cable: tinned copper cable in 8B&S, 6B&S and 2B&S. It resists corrosion in boats and other humid, salty environments.
- Anderson plugs and leads: genuine Anderson connectors from 50A to 350A, 8B&S 50A Anderson style extension leads, flush mount panels and dust covers.
- Busbars, lugs and terminals: 150A to 600A stud busbars, Victron Lynx Power In and Distributor busbars, Blue Sea PowerPost connectors, bellmouth copper lugs, Hellermann Tyton links, ring terminals and butt splices.
- Mains and data cables: Electra Cables 2.5mm² 2 core and earth flexible mains cable, CMS C style connection leads, and Victron RJ45 and RJ12 cables for connecting chargers, inverters and monitors.
- Protection and routing: Hellermann Tyton 3:1 glue-lined heat shrink, split tube conduit from 7mm to 36mm ID, clamshell cable entry covers and insulated terminal covers.
Choosing the Right Cable Size
Cable size has the biggest effect on performance. An undersized cable causes voltage drop, heats up under load and can reduce charging efficiency. Work out each circuit from its current draw, the run length and an acceptable voltage drop. Our DC cable sizing and system wiring calculator will do this for you. Once you know the cable size, match your lugs, heat shrink and connectors to it so every joint is crimped and sealed correctly. For battery and distribution points, browse connectors, busbars and terminals.
Frequently Asked Questions
What size solar cable do I need for my caravan panels?
4mm² twin solar cable suits most short runs and moderate panel currents. For longer runs, or for larger arrays where voltage drop becomes significant, step up to 6mm².
Are Stäubli MC4 and other solar connectors interchangeable?
Mating connectors from different manufacturers is not recommended. For the most reliable connection, use the same brand on both sides of a joint.
When should I use tinned marine cable?
Use tinned cable in boats and in coastal or high-humidity installations. The tin coating helps limit corrosion along the copper strands.
What busbar rating suits my system?
Choose a busbar rated above the maximum continuous current of the circuits it connects. Systems with large inverters may need 600A busbars or Victron Lynx busbars.
Build your next caravan, marine or off-grid system with quality cable and terminations sized for the job. Order the cable, lugs and connectors you need today for a cleaner, safer installation.







Pre-Wired Boards
4x4/Canopy Power Systems
Solar Kits
Inverter Kits
Charger Kits
Battery Kits
Monitoring Kits




































