Australian Owned & Operated Family BusinessAustralian Family Business
Before & After Sales SupportBefore & After Sales Support
10+ Years Solar Industry ExperienceA Decade of Industry Experience
High Quality Green ProductsHigh Quality & Sustainable Products
Fast ShippingFast Dispatch
Great Prices and Price Match GuaranteePrice Match Guarantee
Large Range of DIY KitsRange of DIY Kits

Automotive Cables

Single and twin core auto cable from 1.13mm² to 32mm², sold by the metre or roll.


Automotive Cable for 12V and 24V DC Wiring

This range covers single core and twin core automotive cable for low-voltage DC wiring in caravans, campers, 4WDs, trucks and off-grid vehicle builds. Sizes run from light 3mm (1.13mm²) twin core for small loads up to heavy 2B&S (32mm²) single core for high-current battery circuits, so you can match the conductor to the current draw and the length of each run.

Single Core Auto Cable in Red and Black

Single core cable comes in red and black, so positive and negative runs are easy to tell apart during installation and later fault finding. It suits high-current connections where each conductor is routed and terminated separately. Available sizes are:

  • 8B&S: 7.9mm² red and 8mm² black
  • 6B&S: 13.5mm² red and black
  • 4B&S: 20.29mm² red and black
  • 3B&S: 26mm² red and black
  • 2B&S: 32mm² red and black

Twin Core Automotive Cable

Twin core and sheath cable runs the positive and negative conductors together under one outer jacket. This makes for a tidier installation and adds a layer of protection when cable passes through chassis rails, wall cavities or drawer systems. Twin core options include 3mm (1.13mm²), 4mm (1.84mm²), 5mm (2.9mm²) and 6mm (4.59mm²) for lighting, pumps, fridges and accessory circuits. Heavier 8B&S (7.9mm²), 6B&S (13.5mm²) and 4B&S (20.29mm²) twin core suits longer, higher-current runs such as rear battery feeds and trailer power.

Buy by the Metre or by the Roll

Every size is offered in two formats. Order automotive cable by the metre for single installs, repairs and short runs where you only need the exact length. For fleet fit-outs, workshop stock or multiple builds, 100m automotive cable rolls keep a consistent supply of your most-used sizes on hand.

Sizing Tips for Matching Auto Cable to Your Setup

The right cable size depends on current, run length, system voltage and the acceptable voltage drop for the device at the end of the circuit. Undersized cable can cause poor charging, dim lights and heat build-up, so it pays to calculate before you cut.

  • Work out the current: Use the continuous current of the load or charger rather than a typical figure.
  • Measure the full circuit length: Include both the positive and negative path when calculating voltage drop.
  • Allow for system voltage: A 12V system draws roughly twice the current of a 24V system for the same power, which usually calls for a larger cable.
  • Choose the format: Single core suits separate high-current runs. Twin core suits paired runs where protection and neatness matter.
  • Confirm B&S and mm² equivalents: Device manuals often quote AWG or mm², so check the cross-sectional area rather than the outer diameter.

For a step-by-step calculation, use our DC cable sizing and system wiring calculator for RVs and caravans to confirm the right gauge for your run length and load. Then select your size and format above to get your 12V or 24V wiring job underway with cable cut to the length you need.

Add notes to your order

Powering Your Adventure

We gave it full sun... ☀️

Official Pricing Reference