Australian Owned & Operated Family BusinessAustralian Family Business
Before & After Sales SupportBefore & After Sales Support
10+ Years Solar Industry ExperienceA Decade of Industry Experience
High Quality Green ProductsHigh Quality & Sustainable Products
Fast ShippingFast Dispatch
Great Prices and Price Match GuaranteeVictron & Enerdrive Price Match Guarantee
Large Range of DIY KitsRange of DIY Kits

Victron Smart Battery Protect 48V-100A Bluetooth Low Voltage Disconnect

Disconnects the battery from non-essential loads


Victron 48V 100A Smart BatteryProtect with M8 terminals and programming displayHighlights:M8 Output Terminal: Secure M8 bolt connection for power output to DC loads,M8 Input Terminal: Primary M8 bolt input for battery connection,Remote Connector: Interface for external on/off switch or BMS control,Control Terminals: Terminals for alarm output, ground, and manual programming,Status Display: 7-segment display for status codes and threshold programming,Status LED: LED indicator for Bluetooth connectivity and status.Front angled view of Victron Smart BatteryProtect showing robust heat sink finsKey features: Bluetooth-enabled for wireless programming and monitoring, 100A continuous current rating with 250A peak capacity, Potted electronics for IP67 waterproof protection, Integrated aluminium heat sink for efficient thermal management.Top-right angled view of Smart BatteryProtect 48V 100A with terminal studsTop-left angled view of 48V 100A Bluetooth battery protection deviceVictronConnect app interface showing battery voltage status and load stateThe VictronConnect app provides real-time monitoring of battery voltage and load status via a Bluetooth connection to the Smart BatteryProtect, enabling remote system oversightSettings menu in VictronConnect app for voltage thresholds and alarm modesUsers can easily customise under-voltage shutdown and restart thresholds using the intuitive presets or custom settings within the app for precise battery managementTechnical specification table for Victron Smart BatteryProtect 48V 100AInstallation diagram for the 48V 100A Smart BatteryProtect with electrical connectionsThis comprehensive wiring diagram demonstrates the correct integration of the BatteryProtect with a 48V battery bank, DC loads, and external alarm or remote connectionsDimensional drawing of the Smart BatteryProtect unit showing height and widthDetailed dimensional drawing providing accurate measurements in millimetres for the unit footprint and mounting hole positions to assist with installation planning
Victron 48V 100A Smart BatteryProtect with M8 terminals and programming display
Front angled view of Victron Smart BatteryProtect showing robust heat sink fins
Top-right angled view of Smart BatteryProtect 48V 100A with terminal studs
Top-left angled view of 48V 100A Bluetooth battery protection device
VictronConnect app interface showing battery voltage status and load state
Settings menu in VictronConnect app for voltage thresholds and alarm modes
Technical specification table for Victron Smart BatteryProtect 48V 100A
Installation diagram for the 48V 100A Smart BatteryProtect with electrical connections
Dimensional drawing of the Smart BatteryProtect unit showing height and width
Regular price $215.00
$259.60
/
Availability: In Stock
View all products from Victron
Guaranteed Safe and Secure Checkout
American Express Apple Pay Google Pay MastercardPayPalShop Pay Union PayVisa

2
Victron 48V 100A Smart BatteryProtect with M8 terminals and programming display

Victron Smart Battery Protect 48V-100A Bluetooth Low Voltage Disconnect

DESCRIPTION

Victron Smart Battery Protect 48V-100A: Enhanced Power Management with Bluetooth Connectivity

Integrated Bluetooth for Advanced Control

The Victron Smart Battery Protect 48V-100A stands out with its built-in Bluetooth capability, allowing for easy monitoring and control through a wireless connection. This feature adds a new level of convenience and accessibility in managing your battery system.

Essential Battery Protection for High-Power 48V Systems

Designed specifically for 48V systems, the Victron Smart Battery Protect is crucial for preventing complete discharge in batteries used in industrial setups and off-grid systems. It intelligently disconnects non-essential loads to preserve battery health and ensure operational readiness.

Reliable Uni-Directional Current Management

Uni-directional current flow design ensures safe and efficient power management, offering robust over-voltage protection. This is particularly valuable in high-demand environments where sensitive equipment requires consistent and safe power delivery.

Optimized for High-Voltage and Lithium Batteries

This device is tailored for 48V systems and is particularly effective with Li-ion batteries. It offers specialized control modes, including integration with the VE.Bus BMS, and serves as a charge interrupter, enhancing the care and longevity of your batteries.

Energy Efficiency with Ultra-Low Power Consumption

With minimal energy consumption, the Victron Smart Battery Protect is a highly efficient solution, ensuring your 48V systems, like large solar arrays and industrial machinery, run optimally with reduced energy wastage.

Advanced Safety Features

The robust over-voltage protection and MOSFET switches provide reliable, spark-free operation, crucial for maintaining safety in industrial and off-grid applications.

Convenient Remote Switch Capabilities

Utilize the Bluetooth functionality to remotely operate various devices, enhancing the ease of use and flexibility in large-scale and remotely managed systems.

Intelligent Alarm and Load Management

The smart alarm system and load management features ensure smooth operation, preventing unnecessary power interruptions and maintaining the integrity of your power system.

Choose the Victron Smart Battery Protect 48V-100A for a sophisticated, Bluetooth-enabled solution in managing high-capacity battery systems. Its advanced features make it the ideal choice for industrial and off-grid applications where performance and connectivity are paramount.

SPECIFICATIONS

Specifications

Smart BatteryProtect SBP 48 |100
Maximum Continuous Load Current* 100 A
Peak Current 250 A
Operating Voltage Range 24 – 70 V
Current Consumption BLE On When on: 1.9 mA When off/low voltage shutdown: 1.7 mA
Current Consumption BLE Off When on: 1.7 mA When off/low voltage shutdown: 1.6 mA
Alarm Output Delay 12 seconds
Maximum Load on Alarm Output 50 mA (short circuit proof)
Load Disconnect Delay 90 seconds (immediate if triggered by the VE.Bus BMS)
Default Thresholds Disengage: 42 V Engage: 48 V
Operating Temperature Range Full load: -40 °C to +40 °C (Up to 60% of nominal load at 50 °C)
IP Rating Electronics: IP67 (potted) Connections: IP00
Connection M8
Mounting Torque 9 Nm
Weight 0.8 kg / 1.8 lbs
Dimensions (HxWxD) 62 x 123 x 120 mm / 2.5 x 4.9 x 4.8 inches
Additional Note Not designed for reverse currents from charging sources

*Note: The BatteryProtect is specifically designed to handle load currents and is not suitable for reverse currents from charging sources.


SKU: VIC-BPR110048000
Barcode: 8719076041252
Model #: BPR110048000
MPN: BPR110048000

WARRANTY

Victron Energy Limited Warranty Policy

Direct Customers

Victron Energy provides the following warranty to any direct customer (OEM, distributor or dealer) in relation to any products that Victron Energy has directly sold to the direct customer. This warranty is not an end-user warranty between Victron Energy and an end-user, and end-users shall not have any rights or remedies under this limited warranty towards Victron Energy directly. The direct customer shall, in turn, ensure that the end-user is provided with a warranty identical to this warranty, subject to applicable local mandatory law.

End-Users

Victron Energy may also provide a warranty directly to end-users, in which case the below warranty conditions equally apply to such warranty. In that case, end-users shall claim their warranty at their place of purchase or through the original direct customer of Victron, which can be found through the support section on Victron’s website https://www.victronenergy.com/support. Hence, the direct customer shall on behalf of Victron Energy deal with any warranty claims made under any warranty that Victron Energy may provide directly to end-users. This support section on Victron’s website https://www.victronenergy.com/support will provide further guidance on the procedure for end-users to make a claim under this limited warranty.

If the end-user is a consumer – a natural person who is acting for purposes which are outside that person's trade, business, craft or profession – the following applies. The rights and remedies granted to the consumer under this limited warranty are without prejudice to the consumer’s statutory rights. Furthermore, the consumer is entitled by law to remedies from the seller free of charge in the event of a lack of conformity of the goods (such as repair, replacement, price reduction or rescission), which remedies are not affected by this limited warranty.

Warranty

Victron Energy warrants its products to be free from defects in workmanship and materials for a period of 5 years from the date of purchase by the original end-user, with a maximum of 66 months from the Victron Energy invoice date. Exceptions on this are: lead-acid batteries: 2 years from date of purchase by the original end-user, with a maximum of 30 months from the Victron Energy invoice date, Lithium batteries: 3 years from date of purchase by the original end-user, with a maximum of 42 months from the Victron Energy invoice date. In addition to this, proof of correct battery usage is required when making a battery warranty claim.

For a 10% surcharge on the current net price for products that came with a 5-year warranty, an additional 5 years of warranty can be purchased by Victron’s direct customers, bringing the total warranty to 10 years. Warranty extensions need to be applied for ultimately one year before the expiration of the original term. Victron may ask proof that the product was still functional at the time of purchase of the extended warranty.

During the warranty period, Victron Energy will, at its discretion, repair, replace or (partly) credit the defective product free of charge. The warranty does not include performing or reimbursing de‐installation, transportation, and re‐installation.

This warranty will be considered void if the unit has suffered any physical damage or alteration, either internally or externally, and does not cover damages arising from improper use like:

  • Reversed battery polarity.
  • Inadequate connection.
  • Mechanical shock or deformation.
  • Contact with liquid or oxidation by condensation.
  • Use in an inappropriate environment (dust, corrosive vapour, humidity, high temperature, biological infestation, etc.).
  • Breakage or damage due to lightning.
  • Connection terminals and screws destroyed or other damages, like overheating, due to insufficient tightening.
  • For any electronic breakage except due to lightning (reverse polarity, over‐voltage due to external cause), the state of the internal control diode and/or the input/output X and Y capacitors determine the warranty.

This warranty will not apply where the product has been misused, neglected, improperly installed, or repaired by anyone other than Victron Energy or one of its authorized Repair Centres. In order to qualify for the warranty, the product must not be disassembled or modified.

This warranty and our warranty obligations thereunder (repair, replacement or credit) are the direct customer’s and, if applicable, the end-user’s sole rights and remedies and our sole obligations with respect to any defective and/or non-conforming product or breach of warranty and is subject to and without prejudice to the limitations of liability in this warranty.

Victron Energy shall not be liable for damages, whether direct, incidental, special, or consequential, even caused by negligence or fault.

As a product requires service, it must be brought back to the place of purchase. In case no contact can be made with the merchant, or if he is either unable or not allowed to provide service, direct contact should be made with Victron Energy through the support section on Victron’s website.

In case Victron Energy replaces a product, it will own the replaced product. Victron Energy owns all parts removed from repaired products. Victron Energy uses new or reconditioned parts made by various manufacturers when performing warranty repairs or building replacement products.

If Victron Energy repairs or replaces a part of a product, its warranty term is not extended: the warranty will apply for the remaining term of the original warranty term. For example, if Victron Energy replaces a product with a 5-year warranty after 3 years, the warranty of this product will apply for another 2 years, with a minimum of 6 months.

All remedies and the measure for damages are limited to the above. Victron Energy shall in no event be liable for consequential, incidental, contingent or special damages, even if having been advised of the probability of such damages.

The foregoing limited warranty provided by Victron Energy is in lieu of any other warranties, express or implied arising by law, course of dealing, course of performance, usage of trade or otherwise, of any kind whatsoever including, without limitation, warranties of merchantability or fitness for a particular purpose, with respect to any product. The above is without prejudice to the arrangement for consumers detailed above.

Life Support Policy

As a general policy, Victron Energy does not recommend the use of any of its products in life support applications where failure or malfunction of Victron Energy's product can be reasonably expected to cause the failure of the life support device or to significantly affect its safety or effectiveness. Victron Energy does not recommend the use of any of its products in direct patient care. Victron Energy will not knowingly sell its products for use in such applications unless it receives in writing assurances satisfactory to Victron Energy that the risks of injury or damage have been minimized, the customer assumes all such risks, and the liability of Victron Energy is adequately protected under the circumstances.

Warranty on repairs for products outside their warranty period

The warranty period on products that are outside their warranty period and have been repaired by Victron Energy or one of the Victron Energy Repair centres is six (6) months from delivery. The same applies to spare parts and circuit boards that have been supplied or repaired by Victron Energy.

Transport

It is the responsibility of the sender to sufficiently package these products. The transport must be organized in a way to avoid any damage, especially when a single unit or heavy unit is sent.

Severability

If a part of the terms and conditions of this warranty is held invalid, void or unenforceable due to any particular national or international legislation, it shall not affect other parts of the terms and conditions of this warranty.

Applicable law

This warranty is exclusively governed by the laws of the Netherlands, to the exclusion of the UN Convention on Contracts for the International Sale of Goods.

Contact details

Victron Energy B.V. | De Paal 35, 1351 JG Almere, The Netherlands | https://www.victronenergy.com/support

RECENTLY VIEWED PRODUCTS

Add notes to your order

Powering Your Adventure

We gave it full sun... ☀️

Try  225W Solar Panel  Victron Inverter  

Popular Products


Official Pricing Reference

Shipping Calculator