Victron MagCode Power Clip 12V (Max 15A) (Suits IP65 Battery Charger)
Victron MagCode Power Clip 12V (Max 15A) (Suits IP65 Battery Charger)
Magnetic 12V Connector with 30A Fuse for Blue Smart IP65 Chargers
Highlights:Magnetic Connector Head: Magnetic MagCode connector head for quick and secure 12V power connection,Charger Connector: Secure connection point compatible with Victron Blue Smart IP65 battery chargers,Integrated Strain Relief: Flexible strain relief to protect cable integrity during regular use,12V Power Cable: High-quality red and black twin core cable rated for up to 15A.
The ergonomic rear casing of the MagCode Power Clip allows for easy magnetic attachment and detachment from 12V power ports without mechanical locking. 
DESCRIPTION
Victron MagCode Power Clip: Magnetic 12V Connection for Blue Smart IP65 Chargers
Effortless, Secure Charging with Magnetic Precision
The Victron MagCode Power Clip provides a fast, reliable, and spark-free connection between your Victron Blue Smart IP65 battery charger and the battery. Designed for 12V systems, this magnetic connector eliminates the hassle of traditional clamps, allowing you to connect and disconnect in seconds with a simple snap. Ideal for automotive, marine, and workshop environments where frequent charging is required, the MagCode system reduces wear on terminals and enhances safety.
Engineered to handle up to 15A maximum current, this power clip is perfectly matched to the output of the Blue Smart IP65 charger range. The integrated 30A ATO fuse provides an additional layer of protection, safeguarding your charger and battery against overcurrent events. Whether you're maintaining a starter battery, deep-cycle battery, or a lithium LiFePO4 bank, the MagCode Power Clip ensures a consistent, low-resistance connection every time.
Magnetic Connection Technology: Speed Meets Reliability
Unlike screw terminals or alligator clips that can loosen or corrode over time, the MagCode system uses a self-aligning magnetic interface. The connector head snaps into place with positive engagement, ensuring optimal contact pressure without mechanical locking. This design minimises voltage drop and heat buildup, which is critical for maintaining charging efficiency. The magnetic connection also allows for quick disconnection if the cable is accidentally pulled, reducing the risk of damage to the charger or battery terminals.
The ergonomic rear casing provides a comfortable grip, making it easy to attach and detach even in tight engine bays or confined battery compartments. The connector is polarity-protected, so there's no risk of reverse connection, a common concern with traditional clamps.
Built for Demanding Environments
Victron Energy products are known for their durability, and the MagCode Power Clip is no exception. The high-quality twin-core cable features a robust red and black jacket, clearly identifying polarity and resisting abrasion, oil, and UV exposure. An integrated strain relief at both ends protects the cable from bending stress, extending the service life even with daily use.
The connector contacts are designed to resist corrosion, making this clip suitable for marine and coastal applications where salt spray is a concern. The sealed construction of the magnetic head prevents moisture ingress, ensuring reliable performance in humid or wet conditions.
- Magnetic snap-on connection for fast, one-handed operation
- Integrated 30A ATO fuse for overcurrent protection
- Polarity-protected design eliminates reverse connection risk
- Flexible strain relief prolongs cable life in high-use scenarios
- Corrosion-resistant contacts for marine and coastal use
- Compatible with all Victron Blue Smart IP65 12V chargers
Simple Installation and Daily Use
Installing the MagCode Power Clip is straightforward. The charger-side connector plugs directly into the Blue Smart IP65 charger's output port, while the magnetic clip attaches to your battery's terminals or a pre-installed MagCode Power Port (sold separately). For permanent installations, consider pairing this clip with the Victron MagCode Power Port 12V to create a fully sealed, quick-connect charging point on your vehicle or vessel.
Once set up, daily charging becomes effortless. Simply bring the magnetic head near the port or clip, and it self-aligns and locks into place. The connection is secure enough to withstand vibration and movement, yet releases smoothly when you need to disconnect. This makes it an excellent choice for fleet vehicles, emergency service equipment, and recreational boats where time and reliability are critical.
*Note: The 15A rating is the maximum continuous current. Typical de-rating factors such as ambient temperature and cable bundling should be considered in high-temperature installations.
Upgrade Your Charging Setup Today
Replace worn-out clamps or upgrade to a smarter charging solution with the Victron MagCode Power Clip. Designed to complement the performance of your Blue Smart IP65 charger, this magnetic connector saves time, reduces connection errors, and extends the life of your equipment. Add the MagCode Power Clip to your toolkit and experience the convenience of magnetic charging.
SKU: VIC-BPC900500014
SPECIFICATIONS
Specifications
| Part Number | BPC900500014 |
|---|---|
| Product | MagCode 12 V Power Clip |
| Connector Type | Magnetic 12 V Connector |
| Voltage | 12 V |
| Max Current | 15 A Max. |
| Fuse | 30 A ATO Fuse |
| Compatible Charger | Blue Smart IP65 Charger |
| SKU: | VIC-BPC900500014 |
| Barcode: | 8719076046578 |
| Model #: | BPC900500014 |
| MPN: | BPC900500014 |
WARRANTY
Victron Energy Limited Warranty Policy
Direct Customers
Victron Energy provides the following warranty to any direct customer (OEM, distributor or dealer) in relation to any products that Victron Energy has directly sold to the direct customer. This warranty is not an end-user warranty between Victron Energy and an end-user, and end-users shall not have any rights or remedies under this limited warranty towards Victron Energy directly. The direct customer shall, in turn, ensure that the end-user is provided with a warranty identical to this warranty, subject to applicable local mandatory law.
End-Users
Victron Energy may also provide a warranty directly to end-users, in which case the below warranty conditions equally apply to such warranty. In that case, end-users shall claim their warranty at their place of purchase or through the original direct customer of Victron, which can be found through the support section on Victron’s website https://www.victronenergy.com/support. Hence, the direct customer shall on behalf of Victron Energy deal with any warranty claims made under any warranty that Victron Energy may provide directly to end-users. This support section on Victron’s website https://www.victronenergy.com/support will provide further guidance on the procedure for end-users to make a claim under this limited warranty.
If the end-user is a consumer – a natural person who is acting for purposes which are outside that person's trade, business, craft or profession – the following applies. The rights and remedies granted to the consumer under this limited warranty are without prejudice to the consumer’s statutory rights. Furthermore, the consumer is entitled by law to remedies from the seller free of charge in the event of a lack of conformity of the goods (such as repair, replacement, price reduction or rescission), which remedies are not affected by this limited warranty.
Warranty
Victron Energy warrants its products to be free from defects in workmanship and materials for a period of 5 years from the date of purchase by the original end-user, with a maximum of 66 months from the Victron Energy invoice date. Exceptions on this are: lead-acid batteries: 2 years from date of purchase by the original end-user, with a maximum of 30 months from the Victron Energy invoice date, Lithium batteries: 3 years from date of purchase by the original end-user, with a maximum of 42 months from the Victron Energy invoice date. In addition to this, proof of correct battery usage is required when making a battery warranty claim.
For a 10% surcharge on the current net price for products that came with a 5-year warranty, an additional 5 years of warranty can be purchased by Victron’s direct customers, bringing the total warranty to 10 years. Warranty extensions need to be applied for ultimately one year before the expiration of the original term. Victron may ask proof that the product was still functional at the time of purchase of the extended warranty.
During the warranty period, Victron Energy will, at its discretion, repair, replace or (partly) credit the defective product free of charge. The warranty does not include performing or reimbursing de‐installation, transportation, and re‐installation.
This warranty will be considered void if the unit has suffered any physical damage or alteration, either internally or externally, and does not cover damages arising from improper use like:
- Reversed battery polarity.
- Inadequate connection.
- Mechanical shock or deformation.
- Contact with liquid or oxidation by condensation.
- Use in an inappropriate environment (dust, corrosive vapour, humidity, high temperature, biological infestation, etc.).
- Breakage or damage due to lightning.
- Connection terminals and screws destroyed or other damages, like overheating, due to insufficient tightening.
- For any electronic breakage except due to lightning (reverse polarity, over‐voltage due to external cause), the state of the internal control diode and/or the input/output X and Y capacitors determine the warranty.
This warranty will not apply where the product has been misused, neglected, improperly installed, or repaired by anyone other than Victron Energy or one of its authorized Repair Centres. In order to qualify for the warranty, the product must not be disassembled or modified.
This warranty and our warranty obligations thereunder (repair, replacement or credit) are the direct customer’s and, if applicable, the end-user’s sole rights and remedies and our sole obligations with respect to any defective and/or non-conforming product or breach of warranty and is subject to and without prejudice to the limitations of liability in this warranty.
Victron Energy shall not be liable for damages, whether direct, incidental, special, or consequential, even caused by negligence or fault.
As a product requires service, it must be brought back to the place of purchase. In case no contact can be made with the merchant, or if he is either unable or not allowed to provide service, direct contact should be made with Victron Energy through the support section on Victron’s website.
In case Victron Energy replaces a product, it will own the replaced product. Victron Energy owns all parts removed from repaired products. Victron Energy uses new or reconditioned parts made by various manufacturers when performing warranty repairs or building replacement products.
If Victron Energy repairs or replaces a part of a product, its warranty term is not extended: the warranty will apply for the remaining term of the original warranty term. For example, if Victron Energy replaces a product with a 5-year warranty after 3 years, the warranty of this product will apply for another 2 years, with a minimum of 6 months.
All remedies and the measure for damages are limited to the above. Victron Energy shall in no event be liable for consequential, incidental, contingent or special damages, even if having been advised of the probability of such damages.
The foregoing limited warranty provided by Victron Energy is in lieu of any other warranties, express or implied arising by law, course of dealing, course of performance, usage of trade or otherwise, of any kind whatsoever including, without limitation, warranties of merchantability or fitness for a particular purpose, with respect to any product. The above is without prejudice to the arrangement for consumers detailed above.
Life Support Policy
As a general policy, Victron Energy does not recommend the use of any of its products in life support applications where failure or malfunction of Victron Energy's product can be reasonably expected to cause the failure of the life support device or to significantly affect its safety or effectiveness. Victron Energy does not recommend the use of any of its products in direct patient care. Victron Energy will not knowingly sell its products for use in such applications unless it receives in writing assurances satisfactory to Victron Energy that the risks of injury or damage have been minimized, the customer assumes all such risks, and the liability of Victron Energy is adequately protected under the circumstances.
Warranty on repairs for products outside their warranty period
The warranty period on products that are outside their warranty period and have been repaired by Victron Energy or one of the Victron Energy Repair centres is six (6) months from delivery. The same applies to spare parts and circuit boards that have been supplied or repaired by Victron Energy.
Transport
It is the responsibility of the sender to sufficiently package these products. The transport must be organized in a way to avoid any damage, especially when a single unit or heavy unit is sent.
Severability
If a part of the terms and conditions of this warranty is held invalid, void or unenforceable due to any particular national or international legislation, it shall not affect other parts of the terms and conditions of this warranty.
Applicable law
This warranty is exclusively governed by the laws of the Netherlands, to the exclusion of the UN Convention on Contracts for the International Sale of Goods.
Contact details
Victron Energy B.V. | De Paal 35, 1351 JG Almere, The Netherlands | https://www.victronenergy.com/support















































