Victron 12/24/48V 60A BlueSolar MPPT 150/60-MC4 Non-Bluetooth Solar Charge Controller
Victron 12/24/48V 60A BlueSolar MPPT 150/60-MC4 Non-Bluetooth Solar Charge Controller
Ultra-fast MPPT, 150V PV input, 60A charge, MC4 connectors, VE.Direct port
Highlights:Status LEDs: LED indicators for Bulk, Absorption, and Float charge stages,Battery Terminals: Secure screw terminal connections for 12V, 24V, 36V, or 48V battery banks,MC4 PV Connectors: Two pairs of MC4 connectors for quick and secure solar panel wiring,Model Identification: MPPT 150V maximum PV voltage and 60A maximum charge current rating.
Key features: Integrated MC4 solar connectors for simplified PV wiring, Large aluminium heat sink for efficient passive thermal management, VE.Direct port for wired communication and system monitoring, Robust IP43 protection for electronic components.
Important product distinction: Victron BlueSolar models do not feature built-in Bluetooth. For wireless monitoring, a VE.Direct Bluetooth Dongle is required, or select the SmartSolar equivalent. 
DESCRIPTION
Victron BlueSolar MPPT 150/60-MC4: High-Performance Solar Charge Controller for 12V, 24V, and 48V Systems
Engineered for Maximum Energy Harvest in Demanding Off-Grid and Mobile Installations
The Victron BlueSolar MPPT 150/60-MC4 is a professional-grade MPPT solar charge controller designed to extract the maximum available power from your PV array. With an ultra-fast Maximum Power Point Tracking algorithm, this controller significantly outperforms traditional PWM and slower MPPT units, delivering up to 30% more energy in variable light conditions. Its 150V PV input and 60A charge current make it a versatile solution for medium to large 12V, 24V, and 48V battery systems in caravans, RVs, marine vessels, and remote off-grid installations.
Unlike many controllers that struggle under partial shading, the BlueSolar MPPT 150/60 employs an advanced MPPT detection algorithm that continuously scans the power-voltage curve to lock onto the optimal maximum power point. This ensures consistent energy harvest even when panels are partially shaded, a common challenge in mobile and rooftop installations.
Key Features
- Ultra-fast MPPT tracking — adapts to changing light every 0.1 seconds for up to 30% more energy than PWM controllers
- Advanced shading management — identifies and locks onto the global maximum power point, avoiding local MPP traps
- 98% peak conversion efficiency — fanless design with full 60A output up to 40°C ambient temperature
- Wide PV voltage range — 150V maximum open-circuit voltage allows longer series strings and reduced cable losses
- Flexible charge programming — eight pre-set battery algorithms plus fully customisable charging via VE.Direct
- Comprehensive electronic protection — PV reverse polarity, short circuit, over-temperature, and reverse current safeguards
- Integrated MC4 connectors — two pairs of MC4 PV inputs simplify wiring and reduce installation time
- VE.Direct communication port — enables wired data logging and system monitoring (Bluetooth dongle sold separately)
Advanced MPPT Technology for Superior Energy Yield
At the core of the BlueSolar MPPT 150/60 is a high-speed tracking processor that reacts to irradiance changes in milliseconds. In overcast or rapidly changing weather, this responsiveness translates directly into higher daily energy harvest. The controller's ability to handle up to 150V PV open-circuit voltage allows installers to configure panels in longer series strings, reducing current, minimising voltage drop, and enabling the use of thinner, more cost-effective cabling over longer distances.
Robust Protection and Reliable Operation
Designed for harsh environments, the BlueSolar MPPT 150/60 features an IP43-rated electronics compartment and a large aluminium heat sink for efficient passive cooling. The absence of a cooling fan eliminates a common point of failure and ensures silent operation. Built-in electronic protections guard against installation errors such as PV reverse polarity and short circuits, while automatic power derating at high temperatures protects internal components without interrupting charging.
Flexible Charging for Any Battery Chemistry
The controller supports a fully programmable charge algorithm via the VE.Direct port and VictronConnect software, allowing precise tailoring for lead-acid, AGM, gel, and lithium batteries. An internal temperature sensor provides automatic compensation of absorption and float voltages, extending battery life. For systems requiring remote on/off control or load management, the built-in programmable relay and remote on/off terminal offer seamless integration.
Monitoring and Control Options
While this BlueSolar model does not include integrated Bluetooth, real-time data and settings can be accessed by connecting the optional VE.Direct Bluetooth Smart Dongle or a Victron Color Control GX panel. This provides wireless monitoring via smartphone or tablet, as well as integration into larger Victron energy systems.
Ideal Applications
- Caravan and RV solar upgrades requiring high charge current and multi-voltage support
- Marine battery charging with robust corrosion-resistant construction
- Off-grid cabins and tiny homes needing reliable, high-efficiency charge control
- Industrial remote power systems where uptime and energy yield are critical
With its proven reliability and advanced feature set, the Victron BlueSolar MPPT 150/60-MC4 is a trusted choice for professionals seeking a high-performance solar charge controller that maximises energy harvest and protects valuable battery banks.
Upgrade your solar installation with the Victron BlueSolar MPPT 150/60-MC4 today and experience the difference that ultra-fast MPPT tracking makes in real-world conditions.
SPECIFICATIONS
Specifications
| Battery Voltage | 12 / 24 / 48 V Auto Select (software tool needed to select 36 V) |
|---|---|
| Rated Charge Current | 60 A |
| Nominal PV Power, 12 V | 860 W |
| Nominal PV Power, 24 V | 1720 W |
| Nominal PV Power, 36 V | 2580 W |
| Nominal PV Power, 48 V | 3440 W |
| Max. PV Short Circuit Current | 50 A |
| Maximum PV Open Circuit Voltage | 150 V absolute maximum coldest conditions; 145 V start-up and operating maximum |
| Maximum Efficiency | 98 % |
| Self-Consumption | 10 mA |
| Charge Voltage 'Absorption' | Default setting: 14.4 / 28.8 / 43.2 / 57.6 V (adjustable) |
| Charge Voltage 'Float' | Default setting: 13.8 / 27.6 / 41.4 / 55.2 V (adjustable) |
| Charge Voltage 'Equalization' | Default setting: 16.2 / 32.4 / 48.6 / 64.8 V |
| Charge Algorithm | Multi-stage adaptive (eight pre-programmed algorithms) or user defined algorithm |
| Temperature Compensation | -16 mV/°C / -32 mV/°C / -64 mV/°C |
| Protection | PV reverse polarity / Output short circuit / Over temperature |
| Operating Temperature | -30 to +60 °C (full rated output up to 40 °C) |
| Humidity | 95 %, non-condensing |
| Maximum Altitude | 5000 m (full rated output up to 2000 m) |
| Data Communication | VE.Direct Port |
| Remote On/Off | Yes, 2 pole terminal |
| Programmable Relay | DPST AC rating: 4 A up to 240 Vac / DC rating: 4 A up to 35 Vdc, 1 A up to 60 Vdc |
| Parallel Operation | Yes, but not synchronized |
| Colour | Blue (RAL 5012) |
| PV Terminals | 2 pairs of MC4 connectors |
| Maximum Current Per MC4 Connector | 30 A |
| Battery Terminals | 35 mm² / AWG2 |
| Protection Category | IP43 (electronic components), IP22 (connection area) |
| Weight | 3 kg |
| Dimensions (H x W x D) | 215 x 250 x 95 mm |
| Safety | EN/IEC 62109-1, UL 1741, CSA C22.2 |
| SKU: | Vic-SCC010060300 |
| Barcode: | 8719076025481 |
| Model #: | SCC010060300 |
| MPN: | SCC010060300 |
WARRANTY
Victron Energy Limited Warranty Policy
Direct Customers
Victron Energy provides the following warranty to any direct customer (OEM, distributor or dealer) in relation to any products that Victron Energy has directly sold to the direct customer. This warranty is not an end-user warranty between Victron Energy and an end-user, and end-users shall not have any rights or remedies under this limited warranty towards Victron Energy directly. The direct customer shall, in turn, ensure that the end-user is provided with a warranty identical to this warranty, subject to applicable local mandatory law.
End-Users
Victron Energy may also provide a warranty directly to end-users, in which case the below warranty conditions equally apply to such warranty. In that case, end-users shall claim their warranty at their place of purchase or through the original direct customer of Victron, which can be found through the support section on Victron’s website https://www.victronenergy.com/support. Hence, the direct customer shall on behalf of Victron Energy deal with any warranty claims made under any warranty that Victron Energy may provide directly to end-users. This support section on Victron’s website https://www.victronenergy.com/support will provide further guidance on the procedure for end-users to make a claim under this limited warranty.
If the end-user is a consumer – a natural person who is acting for purposes which are outside that person's trade, business, craft or profession – the following applies. The rights and remedies granted to the consumer under this limited warranty are without prejudice to the consumer’s statutory rights. Furthermore, the consumer is entitled by law to remedies from the seller free of charge in the event of a lack of conformity of the goods (such as repair, replacement, price reduction or rescission), which remedies are not affected by this limited warranty.
Warranty
Victron Energy warrants its products to be free from defects in workmanship and materials for a period of 5 years from the date of purchase by the original end-user, with a maximum of 66 months from the Victron Energy invoice date. Exceptions on this are: lead-acid batteries: 2 years from date of purchase by the original end-user, with a maximum of 30 months from the Victron Energy invoice date, Lithium batteries: 3 years from date of purchase by the original end-user, with a maximum of 42 months from the Victron Energy invoice date. In addition to this, proof of correct battery usage is required when making a battery warranty claim.
For a 10% surcharge on the current net price for products that came with a 5-year warranty, an additional 5 years of warranty can be purchased by Victron’s direct customers, bringing the total warranty to 10 years. Warranty extensions need to be applied for ultimately one year before the expiration of the original term. Victron may ask proof that the product was still functional at the time of purchase of the extended warranty.
During the warranty period, Victron Energy will, at its discretion, repair, replace or (partly) credit the defective product free of charge. The warranty does not include performing or reimbursing de‐installation, transportation, and re‐installation.
This warranty will be considered void if the unit has suffered any physical damage or alteration, either internally or externally, and does not cover damages arising from improper use like:
- Reversed battery polarity.
- Inadequate connection.
- Mechanical shock or deformation.
- Contact with liquid or oxidation by condensation.
- Use in an inappropriate environment (dust, corrosive vapour, humidity, high temperature, biological infestation, etc.).
- Breakage or damage due to lightning.
- Connection terminals and screws destroyed or other damages, like overheating, due to insufficient tightening.
- For any electronic breakage except due to lightning (reverse polarity, over‐voltage due to external cause), the state of the internal control diode and/or the input/output X and Y capacitors determine the warranty.
This warranty will not apply where the product has been misused, neglected, improperly installed, or repaired by anyone other than Victron Energy or one of its authorized Repair Centres. In order to qualify for the warranty, the product must not be disassembled or modified.
This warranty and our warranty obligations thereunder (repair, replacement or credit) are the direct customer’s and, if applicable, the end-user’s sole rights and remedies and our sole obligations with respect to any defective and/or non-conforming product or breach of warranty and is subject to and without prejudice to the limitations of liability in this warranty.
Victron Energy shall not be liable for damages, whether direct, incidental, special, or consequential, even caused by negligence or fault.
As a product requires service, it must be brought back to the place of purchase. In case no contact can be made with the merchant, or if he is either unable or not allowed to provide service, direct contact should be made with Victron Energy through the support section on Victron’s website.
In case Victron Energy replaces a product, it will own the replaced product. Victron Energy owns all parts removed from repaired products. Victron Energy uses new or reconditioned parts made by various manufacturers when performing warranty repairs or building replacement products.
If Victron Energy repairs or replaces a part of a product, its warranty term is not extended: the warranty will apply for the remaining term of the original warranty term. For example, if Victron Energy replaces a product with a 5-year warranty after 3 years, the warranty of this product will apply for another 2 years, with a minimum of 6 months.
All remedies and the measure for damages are limited to the above. Victron Energy shall in no event be liable for consequential, incidental, contingent or special damages, even if having been advised of the probability of such damages.
The foregoing limited warranty provided by Victron Energy is in lieu of any other warranties, express or implied arising by law, course of dealing, course of performance, usage of trade or otherwise, of any kind whatsoever including, without limitation, warranties of merchantability or fitness for a particular purpose, with respect to any product. The above is without prejudice to the arrangement for consumers detailed above.
Life Support Policy
As a general policy, Victron Energy does not recommend the use of any of its products in life support applications where failure or malfunction of Victron Energy's product can be reasonably expected to cause the failure of the life support device or to significantly affect its safety or effectiveness. Victron Energy does not recommend the use of any of its products in direct patient care. Victron Energy will not knowingly sell its products for use in such applications unless it receives in writing assurances satisfactory to Victron Energy that the risks of injury or damage have been minimized, the customer assumes all such risks, and the liability of Victron Energy is adequately protected under the circumstances.
Warranty on repairs for products outside their warranty period
The warranty period on products that are outside their warranty period and have been repaired by Victron Energy or one of the Victron Energy Repair centres is six (6) months from delivery. The same applies to spare parts and circuit boards that have been supplied or repaired by Victron Energy.
Transport
It is the responsibility of the sender to sufficiently package these products. The transport must be organized in a way to avoid any damage, especially when a single unit or heavy unit is sent.
Severability
If a part of the terms and conditions of this warranty is held invalid, void or unenforceable due to any particular national or international legislation, it shall not affect other parts of the terms and conditions of this warranty.
Applicable law
This warranty is exclusively governed by the laws of the Netherlands, to the exclusion of the UN Convention on Contracts for the International Sale of Goods.
Contact details
Victron Energy B.V. | De Paal 35, 1351 JG Almere, The Netherlands | https://www.victronenergy.com/support















































