Enerdrive 12.8V 100Ah B-TEC Slimline Lithium Battery with 12V 40A+ ePOWER DC2DC+ DC-DC Charger Bundle
Enerdrive 12.8V 100Ah B-TEC Slimline Lithium Battery with 12V 40A+ ePOWER DC2DC+ DC-DC Charger Bundle
Slimline LiFePO4 Case with Bluetooth BMS & Built-In MPPT Solar Input

DESCRIPTION
Integrated Off-Grid Power Storage and Dual-Input Mobile Charging
Space-Saving 12V Lithium Auxiliary Battery System for 4WDs, Caravans, and Campers
Building a reliable off-grid electrical system requires components that are engineered to work together seamlessly. This complete dual battery bundle pairs the space-saving Enerdrive 12.8V 100Ah B-TEC Slimline LiFePO4 Battery with the high-performance DC2DC 40+ Charger. Designed specifically for Australian touring conditions, this combination eliminates the guesswork of matching charging profiles and current limits, delivering a cohesive 12V power solution for 4WDs, camper trailers, and caravans where installation space is at a premium.
Unlike traditional lead-acid or AGM setups that suffer from significant voltage drop and limited usable capacity, this lithium iron phosphate (LiFePO4) system provides stable voltage delivery and deep-cycle endurance. By combining high-density slimline energy storage with automated multi-source charging, you can reliably run 12V fridges, lighting, compressors, and camp appliances without risking your vehicle's starting battery.
Key Features and System Benefits
- Compact Slimline Footprint: The 100Ah LiFePO4 battery is housed in a narrow 109mm deep ABS case, making it ideal for fitting behind 4WD dual-cab seats, along wheel arches, or inside narrow caravan cabinetry.
- Dual-Input DC-DC Charging with MPPT: Features independent inputs for both vehicle alternator (compatible with 12V or 24V systems) and solar panels, managed by a built-in Maximum Power Point Tracking (MPPT) regulator.
- Automatic Source Selection: Transitions between alternator power while driving and solar input when parked, without the need for external relays or manual switching.
- Real-Time Smartphone Telemetry: Integrated Bluetooth connectivity allows you to monitor State of Charge (SoC), voltage, current draw, temperature, and individual cell status via the Android or Apple app.
- Active Battery Management System (BMS): Internal prismatic cells are continuously balanced and protected against over-charge, over-discharge, over-temperature, and short circuits.
- Dedicated Power Supply Mode: Once the battery reaches float stage, the charger supports connected onboard DC loads directly to prevent unnecessary cycling of your battery bank.
Intelligent Dual-Input Charging and Solar Regulation
Modern vehicles equipped with variable-voltage or smart alternators often fail to charge auxiliary batteries to 100% capacity. The Enerdrive DC2DC 40+ overcomes this limitation by boosting and regulating the input voltage into a precise multi-stage lithium charging profile. Capable of delivering 40A+ output in ambient temperatures up to 40°C, it rapidly replenishes your battery bank during short drives between campsites.
When you pull up at camp, the integrated MPPT solar controller takes over automatically. It harvests maximum available power from solar arrays up to 45V Open Circuit Voltage (Voc), converting excess panel voltage into usable charging current. The unit features a programmable LCD screen for live system diagnostics and sturdy M6 screw terminals for secure, low-resistance cable terminations that will not vibrate loose on corrugated tracks.
Installation Guidelines and System Parameters
To ensure long-term reliability and protect the internal electronics, this system must be installed within its operational design limits. The B-TEC slimline battery is strictly for internal installation only; it must never be mounted in an engine bay, wet area, gas compartment, or any location exposed to the elements and high radiant heat. Prior to initial deployment, fully charge the battery and configure the DC2DC charger to the dedicated lithium profile.
For users running AC appliances, the 100Ah B-TEC battery supports a maximum inverter capacity of 1,000W. Exceeding this draw can trip or damage the internal BMS. While you can parallel one additional B-TEC battery of the exact same model to double your storage capacity, the combined continuous load must still remain within the current limits of a single battery's BMS.
Upgrade Your Touring Power System
Backed by a comprehensive 5-year warranty on both the battery and charger, this matched Enerdrive bundle reduces wiring complexity and provides dependable off-grid autonomy. Add the Enerdrive 100Ah Slimline Lithium and DC2DC 40+ Bundle to your setup today for complete confidence on your next remote touring adventure.
SKU: K-100-12
SPECIFICATIONS
B-TEC 12.8 V 100 Ah LiFePO4 Slimline Battery
| Battery chemistry | LiFePO4 |
|---|---|
| Intended use | Deep-cycle applications |
| Nominal voltage | 12.8 V |
| Nominal capacity | 100 Ah |
| Charge cycle life | >2,500 cycles at 80% depth of discharge under controlled conditions |
| Charging profile requirement | A lithium-profile charger is required |
| Charge temperature range | 0–45 °C |
| Charge voltage | 14.20–14.60 V (CV/CC) |
| Standby (float) voltage | 13.50–13.80 V |
| Maximum charge current | 80 A at 25 °C for 30 minutes |
| Recommended charge current | 20–50 A for maximum battery life |
| Discharge temperature range | −20–60 °C |
| Battery output voltage range | 11.00–14.60 V |
| Maximum discharge current | 100 A at 25 °C ± 5 °C for 30 minutes |
| Pulse discharge current | 250 A for 1.0 second |
| Discharge cut-off voltage | Below 11.20 V |
| Battery management system | Internal LiFePO4 BMS monitors and optimizes individual prismatic cells during charge and discharge |
| BMS protection | Protects against overcharge, over-discharge, over-temperature and short circuit |
| Overcharge protection threshold | 3.75 V ± 0.03 V per cell |
| Overcharge release threshold | 3.60 V ± 0.05 V per cell |
| Overcharge release method | Discharge below the release voltage |
| Over-discharge protection threshold | 2.80 V ± 0.05 V per cell |
| Over-discharge release threshold | 3.20 V ± 0.05 V per cell |
| Over-discharge release method | Apply charge/voltage above 12.8 V |
| Discharge overcurrent protection | 280 A for 25 seconds or 400 A for 3.5 seconds |
| Overcurrent protection reset | Automatic release after 5 seconds |
| Overcurrent release method | Disconnect the load |
| Discharge over-temperature protection | Protection at 65 °C ± 5 °C; releases at 50 °C ± 5 °C |
| Charge over-temperature protection | Protection at 55 °C ± 5 °C; releases at 45 °C ± 5 °C |
| Short-circuit protection reset | Automatic release after 5 seconds |
| Bluetooth monitoring | Wireless monitoring through a smartphone or tablet app |
| App compatibility | Android and Apple devices |
| App-monitored battery capacity | Available in the app |
| App-monitored battery voltage | Available in the app |
| App-monitored battery current | Battery current in amps is available in the app |
| App-monitored state of charge | Available in the app |
| App-monitored state of health | Available in the app |
| App-monitored battery status | Available in the app |
| App-monitored individual cell voltage | Available in the app |
| App-monitored battery temperature | Available in the app |
| App-monitored battery cycles | Available in the app |
| App-monitored battery alarms | Available in the app |
| App-monitored battery event information | Available in the app |
| Parallel connection | May be paralleled with one B-TEC battery of the same size; no more than two batteries should be connected together to increase capacity |
| Load limit when paralleled | Overall loads must not exceed the current limits of a single battery’s BMS |
| Maximum inverter capacity | 1,000 W; exceeding this limit can damage the battery BMS |
| Fully discharged battery | If the BMS is off, recharge within 14 days to avoid cell damage |
| Before use | Charge the battery fully before use |
| Installation restriction | Do not install in vehicle engine bays or other high-heat environments, wet areas, or compartments used to carry gas |
| Installation location | For internal use only; do not install where it may be exposed to the elements |
| Storage conditions for less than 30 days | −20–60 °C; 5–75% relative humidity |
| Storage conditions for more than 30 days | −10–45 °C; 5–75% relative humidity |
| Component dimensions — length | 551 mm |
| Component dimensions — depth | 109 mm |
| Component dimensions — height | 137 mm |
| Component weight | 13.7 kg |
| Case construction | High-impact ABS plastic |
| Warranty | 5 years |
Enerdrive Dometic 12 V 40 A+ DC-DC Battery Charger with MPPT Solar Regulator
| Charger type | Fully automatic, multistage charger with vehicle and solar inputs |
|---|---|
| DC input configuration | Two independent inputs: engine/alternator and solar |
| Battery-bank output configuration | One house battery-bank output; single DC output bank |
| Input source selection | Automatically selects vehicle or solar charging; no external relays are required |
| Solar regulation | Built-in MPPT solar regulator |
| Vehicle input system voltage | Supports 12 V or 24 V vehicle input |
| Vehicle input voltage range | 10.5–16 VDC or 21–32 VDC |
| Vehicle input current limit | Vehicle input is limited to 50 A |
| Condition for 50 A output from vehicle input | Vehicle-input voltage must be higher than output voltage to achieve 50 A |
| Solar input voltage range | 14.5–45 V open-circuit voltage |
| Solar input current limit | 30 A; a higher-voltage array can allow output current greater than the 30 A input limit |
| Solar input power limit at input voltage up to 23 V | 500 W maximum; 600 W allowable |
| Solar input power limit at input voltage from 37.5–45 V | 750 W maximum; 800 W allowable |
| Nominal output voltage | 12 V nominal; 8.0 V minimum |
| Maximum output current | 40–50 A; vehicle input is limited to 50 A, and achieving 50 A from vehicle input requires input voltage above output voltage |
| Output power | 775 W |
| Selectable battery profiles | Gel, AGM, flooded, lithium or programmable custom profile |
| Charger voltage range | 13.8–15.5 V |
| Float voltage range | 13.0–13.8 V |
| User-selectable charging current | 5, 10, 15, 20, 25, 30, 35, 40, 45 or 50 A; default 40 A |
| Flooded-battery equalization voltage | 15.5 V |
| Equalization charging current | 10% of the bulk-current setting |
| Charging control | Selectable 2-stage or 3-stage charging; default is 3-stage |
| Bulk/boost stage | Charges at the charger’s full rated output current until the battery reaches its absorption voltage |
| Absorption stage | Holds the charger voltage steady while current tapers as the battery approaches full charge |
| Float stage | Lowers and holds output voltage at a predetermined level, supplying current for battery self-discharge and connected loads |
| Power-supply operation | After the house battery reaches float, the charger transitions to power-supply mode to support onboard DC loads |
| Load-based regulation | Regulates output based on loads connected to the battery bank to support transition to float at the appropriate time |
| Battery temperature setting | Low, normal or high |
| Included battery temperature sensor | Temperature sensor supplied as standard for more accurate battery charging |
| Display and controls | Fully programmable LCD displays the charging source, charger status, voltage and amperage |
| Cooling | Thermally controlled fan cooling |
| Output and temperature | 40 A+ output up to 40+ °C |
| DC terminals | M6 screw terminals for battery-cable connections between sources |
| Current draw from CH1 when not in use | Less than 50 mA |
| Efficiency | 95% |
| Component dimensions — height | 242 mm |
| Component dimensions — width | 172 mm |
| Component dimensions — depth | 74 mm |
| Component weight | 1.85 kg |
| Warranty | 5 years |
| SKU: | K-100-12 |
| Model #: | K-100-12 |
| MPN: | K-100-12 |
| HS code: | 8507600030 |
| Country of origin: | CN |
| Package weight: | 18.66 kg |
| Package length: | 0.87 m |
| Package width: | 0.14 m |
| Package height: | 0.3 m |
WARRANTY
ENERDRIVE PRODUCT WARRANTY
In the unlikely event that a technical issue arises with an Enerdrive product, customers are encouraged to initially contact the Enerdrive Support Team for immediate and efficient expertise and first class product support.
Important Note: Consumer Protections
If you have purchased your product in Australia, you should be aware that:
This warranty is provided in addition to other rights and remedies held by a consumer at law. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
If you have purchased your product in New Zealand, you should be aware that:
This warranty is supplemental to any other rights and remedies you have under the Consumer Guarantees Act 1993 NZ, unless your purchase is made for commercial purposes, in which case Enerdrive excludes all consumer guarantees implied in the Consumer Guarantees Act 1993 NZ in respect of your product.
Enerdrive warrants that its Products will be free from defects in materials and workmanship (subject to limits, and in normal conditions, as described later in this warranty) for up to 5 years from the date of purchase.
Warranty Support Team
As part of the Enerdrive warranty process you may be asked to speak with an Enerdrive Support Team member. This team assists with all technical enquiries & are there to ensure a great result is achieved every time. They will typically discover 1 of 3 possible issues:
- User Error - This is nothing to be ashamed of. Enerdrive appreciate that reading a user manual from start to finish & taking it all in is not an easy task. Enerdrive recommends every customer reads all associated user manuals. If you are still experiencing problems reach out to the Enerdrive Support Team.
- Installation Issues - The Enerdrive Support Team are highly skilled at resolving “Installation” related issues. To assist with your enquiry, you will be asked to share images of the installation and wiring of your system. An installation related issue does not usually lead to a product replacement (unless there are also defects in materials or workmanship of the product). The Enerdrive Support Team are however available to assist by offering support & guidance to both the product owner or a suitably qualified person to achieve an amicable solution.
- Product Failure - If in the unlikely event an Enerdrive product has defects in materials or workmanship (in normal conditions, as described in this warranty) and it meets the conditions as described in this warranty statement Enerdrive will arrange for the product to be repaired or replaced promptly.
Advanced Warranty Replacement Program
For a faster turn-around, and to get you up and running as quickly as possible, Enerdrive offer an “Advanced Warranty Replacement” program. This program is valid for the first 18 months of end user ownership; (i.e. The final user of the Enerdrive system). The program differs slightly depending on whether you have a credit account with Enerdrive or not.
Credit Account Customer
At your request Enerdrive will ship you a replacement product straight away and charge your account for the full cost of this replacement product. The advanced warranty replacement will be sent with a Reply-Paid satchel allowing you (or your customer) to return the faulty product via our free return freight service at your earliest convenience. Once the faulty product is received and Enerdrive has determined that it is covered under Enerdrive’s warranty, Enerdrive will credit back to your account the full cost of the advanced warranty replacement you originally received.
COD Customer / End User
At your request Enerdrive will ship you a replacement product straight away and charge your credit card, (as you are a COD customer), for the full cost of this replacement product. The advanced warranty replacement will be sent with a Reply Paid satchel allowing you to return your faulty product on our free return freight service at your convenience. Once the faulty product is received and Enerdrive has determined that it’s covered under Enerdrive’s warranty, Enerdrive will credit back to your credit card the full cost of the advanced warranty replacement you originally received.
Advanced Warranty Program Conditions for All Customers
By requesting an Advanced Warranty Replacement please be advised that if the product you return is found NOT to be faulty or is NOT covered under Enerdrive’s warranty policy (This document in full), then you will not be entitled to a refund for the cost of the Advanced Warranty Replacement and the product you returned will be shipped back to you at your expense.
Which Products does the warranty apply to?
It applies to all products manufactured or supplied under Enerdrive brands (Products). (Non Enerdrive branded products defined within Appendix)
How long does the warranty apply for?
The warranty applies for the period set out in the ‘Table – products and warranty periods’ set out at the end of this document. (Warranty Period). The periods set out in the ‘Table – products and warranty periods’ begin at the time that the first owner (other than a commercial reseller) first purchases a new Product; if the effect of that is to make your Warranty Period shorter than 5 years, then the shorter period applies. Also, if a previous owner of the Product (other than a commercial reseller) has owned it for a period of time before selling it to you, then it is likely that they will have used up part of the Warranty Period offered by Enerdrive, due to the passage of time. In that case, you will receive the benefit of the remaining balance of the Warranty Period, when you purchase it from them. You must also notify Enerdrive of any warranty claim for a Product within a reasonable period (usually 90 days) after you become aware of a Product which malfunctions. stops operating
Who is the warranty offered to? or
The person who purchases the Product from Enerdrive, or a subsequent owner(s) of the Product who purchases it from another person. (You or you)
What is being warranted?
Enerdrive warrants that covered Products will be free from defects in materials and workmanship (in normal conditions, as described in this warranty). Enerdrive does not promise that Products will always operate without interruptions, nor that Products will always be error-free. Enerdrive Products may not be suitable for medical, mining or other commercial use applications where constant uninterrupted operation may be a requirement (for these applications, the warranty period will be defined at point of sale). Each Enerdrive product is designed to operate in accordance with the specifications and in the conditions set out in any datasheet relating to the particular Product, and limits and constraints which are stated in those specifications and conditions for a Product are not defects in the Product. This is the only voluntary warranty made by Enerdrive for the Products. No person at Enerdrive can offer any different or broader warranty.
Who will determine if a Product is defective?
Enerdrive, who must act honestly and reasonably in making that decision. A court with appropriate jurisdiction may review Enerdrive’s decision.
What will Enerdrive do?
If a Product stops operating or malfunctions during the Warranty Period, due to a defect in materials or workmanship, then Enerdrive must choose between:
- repairing the defective Product, without charge to You;
- replacing the defective Product, without charge to You; or
- providing You with a refund of the purchase price paid for the defective Product.
What costs are covered?
- Reasonable costs of delivery and installation of any repair and / or replaced Products or components of Products.
- Reasonable costs of removal and return of any defective Products; and
- If the Australian Consumer Law (ACL) applies to the relationship between Enerdrive and You, then reasonable consequential expenses related to the defect and these other costs.
You must obtain written authorisation from Enerdrive, whenever possible, before incurring costs such as those mentioned above.
What are the limits on this warranty?
This warranty doesn’t cover any defect or fault to the extent to which it arises due to:
- Improper storage, handling or installation, operation use or maintenance of Products which is careless, inconsistent with instructions provided by Enerdrive, due to failure to follow the procedures and steps set out in any Commission Form, or due to inaccurate completion of the Commission Form;
- physical damage including to a Product’s surface coating or cabinet;
- use of the Product for a purpose or in environmental conditions for which it was not designed or sold, or use outside the specified or normal operating ranges for a Product;
- changes in a Product which occur due to climate or other external influence (for example: foreign material contamination, water entry, exposure to extreme heat or cold or to solvents, lightning, connection with reverse polarity or other inappropriate connection, interference from insects and pests and other issues);
- use of the Product in a more complex system which does not correctly take into account Product design, the impact of other elements of that system, and related impacts;
- normal wear and tear;
- repairs, alterations or modifications to the Product (unless done by Enerdrive);
- the use of any spare parts not manufactured, sold or approved by Enerdrive;
- any other defective or malfunctioning parts in the vehicle or device in which the Product has been installed;
- use of a Product for any unreasonable purpose;
- If any event or circumstance which is beyond the reasonable control of Enerdrive; or
- continued use of a Product after it has stopped operating or has malfunctioned.
Commercial, Medical & Mining applications carry a maximum warranty period of 24 months unless agreed to in writing at time of order / contract. an Enerdrive supplied product stops operating or has malfunctioned, you should stop using the Product immediately and make it available for assessment by the Enerdrive Support Team or warranty agent for inspection.
How can You make a warranty claim?
Contact the Enerdrive Support Team.
You must:
- make any claim in writing via email to support.enerdrive@dometic.com
- include details of the alleged defect or fault and the circumstances surrounding the defect or fault.
- provide relevant evidence of the claim, including photographs of the product installed and associated system wiring.
- provide evidence of the date when You purchased the Product including proof of purchase for the product from Enerdrive or from another person;
- Follow Enerdrive’s reasonable instructions about return of the Product.
Are there other things which may affect the warranty?
Yes. If the Product’s serial number has been altered or removed, or if the case or seal of the Product has been opened or tampered with, then this might adversely affect Your ability to make a warranty claim. Also, if you have not paid for the Product, then this may adversely affect Your ability to make a warranty claim.
How will the warranty process work, practically?
You must follow the reasonable directions and system checks / tests of the Enerdrive Support Team. If the Product is returned to Enerdrive, then upon receipt at Enerdrive, the Product will be assessed for defects, and Your claim will be reviewed. If the warranty claim is valid, then Enerdrive will choose one of the options mentioned above (repair, replacement or refund) and will communicate with You about that, to implement that choice. If the warranty claim is invalid, then Enerdrive will notify You and will provide a reasonable explanation why Enerdrive considers the claim invalid. You must then organise pickup of the Product at Your expense within 30 days. All Products replaced (or components which are replaced), will become the property of Enerdrive. If Enerdrive has ceased manufacturing or supplying a relevant Product or component, then Enerdrive may elect to deliver another type of Product (or component of a Product) which differs in colour, shape, size, weight, brand or other specifications in fulfilling its obligations under this warranty. Also, Enerdrive may always elect to provide a Product which is superior to Your original Product.
What else do You need to know?
Wrong deliveries, incorrect or damaged packing and transit damage claims are not warranty claims. Such cases should be directed to Enerdrive’s customer service 1300 851 535 Enerdrive may be required to seek personal information from you when you seek to make a claim under this warranty. Such personal information may be used by Enerdrive to process warranty claims and carry out repairs. Your information will not be shared with any other parties without your consent.
How does this warranty interact with other promises about the Product?
This warranty is in addition to any other rights and remedies which You are provided with by law. However, any warranties implied by law are limited to the greatest extent that is legally possible.
Enerdrive Five (5) Year Transferrable Product Warranty
Validity Date Enerdrive makes this warranty and associated warranty periods, valid for all products purchased from Enerdrive or its associated dealers / manufacturers from January the 1st, 2020.
Table – Products and Warranty Periods
Enerdrive supports your products “technically” for as long as you own them. Our defined warranty periods are listed below for all products (For purposes of manufacturing defects and faults and as defined in our Enerdrive Warranty Terms and Conditions)
| Product / Brand | Warranty Period | Additional instructions for product |
|---|---|---|
|
Enerdrive Battery Chargers: • ePOWER AC Series • ePOWER Industrial Series • ePOWER DC2DC • ePOWER DC Converters • ePRO AC Series |
5 Years |
• All products must be fitted according to supplied User manual and fitting instructions. • DC2DC Not approved for Under Bonnet applications. • Should any product be installed against Electrical Industry ‘Best Practice’ then a maximum warranty of 2 years only will apply ** |
|
Enerdrive Power Inverters: • ePOWER True Sine Series • ePOWER AC Transfer Inverters |
5 Years |
• All products must be fitted according to supplied User manual and fitting instructions. • Should any product be installed against Electrical Industry ‘Best Practice’ then a maximum warranty of 2 years only will apply ** |
|
Inverter / Charger Combi’s: • ePOWER Combi Series • ePRO Combi Series |
5 Years |
• All products must be fitted according to supplied User manual and fitting instructions. • Should any product be installed against Electrical Industry ‘Best Practice’ then a maximum warranty of 2 years only will apply ** |
|
Battery Monitors: • ePRO+ Series • Simarine (when sold as part of a pre-built power system) |
5 Years |
• All products must be fitted according to supplied User manual and fitting instructions. • Should any product be installed against Electrical Industry ‘Best Practice’ then a maximum warranty of 2 years only will apply ** |
|
Enerdrive Lithium Batteries • BTEC Lithium Series • BTEC ULTRA Series • Pro Series |
5 Years |
• Battery charger used MUST have and be set to Lithium charge profile set to the correct charge voltages. • No under bonnet applications – All Warranties voided if done so. • The maximum discharge current that can be drawn from ALL batteries in a single installation should not exceed the maximum discharge current of a single batteries BMS current rating. • Paralleled battery systems must be installed according to the Enerdrive ‘How to Parallel Lithium Batteries’ guidelines found HERE • It is reasonable to expect a decrease in useable amp-hour capacity over time with Lithium batteries due to factors such as number of cycles, and discharge rates. • The Lithium Battery warranty will cover all failures (no power delivery), however natural capacity decrease is not supported with the 5-year period. Should a battery deliver less than 70% of its capacity as recorded by 2 full discharge / recharge cycles as measured by an ePRO+ Battery monitor with no signs of excessive use / wear & tear, it will be considered a warrantable claim. • Any Lithium battery mounted externally must be protected from the elements to avoid any possibility of water ingress. |
Table – Products and Warranty Periods
Enerdrive supports your products “technically” for as long as you own them. Our defined warranty periods are listed below for all products (For purposes of manufacturing defects and faults and as defined in our Enerdrive Warranty Terms and Conditions)
|
Enerdrive Solar Panels: • Fixed Frame |
5 Years |
• It is reasonable to expect a decrease in produced watts delivered from solar panels over time. This is not covered under the 5-year period. • However, should a solar panel deliver less than 70% of its capacity as recorded by a short circuit test in full sunlight, with panel angled according to the seasonal time of year it may be considered a warrantable claim. • Any signs of pressure, hail damage or incorrect mounting will however void any claim. • In the event of a claim for Warranty being approved, Enerdrive cannot be held accountable for labour or removal / replacement costs of faulty solar panels. |
|
Solar Controllers: • ePOWER Series • MorningStar Series (see note) |
5 Years |
• All products must be fitted according to supplied User manual and fitting instructions. • Should any product be installed against Electrical Industry ‘Best Practice’ then a maximum warranty of 2 years will only apply **. |
| Enerdrive Complete System Packages: Fully assembled System Plates, Canopy panels, DIY Install Kits, | 5 Years All Enerdrive components and workmanship included |
• All systems plates must be fitted according to supplied User manual and fitting instructions. • It is recommended that all high current and charge cable connections be checked for tightness on a regular basis. |
| Connection Accessories: BLUE SEA Connection Accessories, Bussmann, Carling & Enerdrive Range | For as Long as the System is Installed up to 5 Years |
• All products must be fitted according to supplied User manual and fitting instructions. • Should any product be installed against Electrical Industry ‘Best Practice’ then a maximum warranty of 2 years will only apply. |
| Simarine (when sold separately) | 3 Years | • As per standard manufacturer warranty periods defined with product |
| For all other brands sold by Enerdrive|Dometic | See notes | • As per standard manufacturer warranty periods defined with product |
** The Term ‘Industry Best Practice’ relates to how a cross section of professionals within the DC / AC related industries would view what is considered Right or Wrong in a wiring system. It is not an attempt by Enerdrive to void any warranty obligations, however considering a large proportion of product issues are related to installation or system-based problems of some nature, it’s ensuring that an Enerdrive product is installed and used correctly as originally intended. All Enerdrive products have an installation manual which shows the requirements for installation, with ‘Industry Best Practice’. Installations shall be compliant to relevant standards including but not limited to AS/NZ 3001 (Electrical Installation Transportable Structures) and AS/NZ 3004 (Electrical Installation Marinas and Boats)
Other Notes:
- While warranty is transferrable to subsequent owners, it is ONLY valid to original installation.
- Commercial, Medical and Mining Application Warranty: Unless agreed otherwise, the standard warranty for all Commercial Vehicle, Medical or Mining applications is 24 Months, unless agreed to in writing at time of order / supply contract. Enerdrive will evaluate the application fairly on all merits of use to determine the best possible warranty period to assist the client.







Pre-Wired Boards
4x4/Canopy Power Systems
Solar Kits
Inverter Kits
Charger Kits
Battery Kits
Monitoring Kits































