Blue Sea Panel 360 Blank Panel for M-Series Battery Switches
Blue Sea Panel 360 Blank Panel for M-Series Battery Switches
Modular UV-Stabilised Flush Mount Bezel with Dual Circuit Label Slots

DESCRIPTION
Seamless Modular Integration for M-Series Battery Switch Installations
The Blue Sea Panel 360 Blank Panel for M-Series Battery Switches is a purpose-built mounting module designed to integrate directly into the industry-standard Blue Sea Systems 360 Panel System. Whether you are designing a custom electrical distribution board for a marine vessel, fitting out an off-grid 4WD canopy, or upgrading a caravan power management setup, this modular panel provides a clean, factory-grade finish for your battery isolator switch.
Custom electrical installations often suffer from messy cutouts, misaligned switches, or fragile mounting surfaces when using unbranded aftermarket plates. By utilising the 360 Panel System architecture, system builders and marine electricians can eliminate the guesswork of manual fabrication. This module features a precision-moulded aperture specifically engineered to house Blue Sea M-Series battery switches, ensuring a secure, flush-mount fitment that resists vibration and mechanical stress in demanding mobile and marine environments.
Engineered for Durability and Clear Circuit Identification
Constructed from heavy-duty, UV-stabilised, and flame-retardant materials, thistextured black mounting bezel is built to withstand harsh Australian marine and outback conditions without warping, fading, or cracking over time. Safety and operational clarity are paramount in complex 12V and 24V DC electrical systems. To prevent accidental switching or circuit confusion during critical operations, the panel incorporates dedicated primary and secondary recessed slots for standard Blue Sea backlit or adhesive function labels. This allows you to clearly identify start batteries, house banks, emergency parallel switches, or dedicated high-load circuits at a glance.
Key Features and Benefits
- Precision M-Series Aperture: Pre-moulded flush-mount cutout engineered specifically for the footprint of Blue Sea Systems M-Series mini battery switches.
- 360 Panel System Compatibility: Integrates seamlessly with other 360 Panel modules, frames, and bezels for scalable, custom power distribution layouts.
- Dual Label Provision: Includes standardized primary and secondary slots for function labels to clearly identify power sources, battery banks, or isolated circuits.
- Marine-Grade Construction: Manufactured from durable, UV-stabilised, and non-corrosive materials suitable for cockpit, cabin, or vehicle canopy installations.
- Professional Aesthetics: Textured black finish matches existing Blue Sea switchgear and hides mounting hardware when paired with the outer bezel frame.
Ideal Applications
This modular mounting panel reduces the risk of switch loosening, panel cracking, and wiring strain common with makeshift mounting solutions. It is ideally suited for:
- Marine helm stations, electrical lockers, and yacht distribution boards
- Caravan, camper trailer, and motorhome 12V/24V battery management centres
- 4WD dual battery systems and custom service body fit-outs
- Off-grid cabin and industrial DC power control panels
Note: This product is the modular mounting panel only; compatible Blue Sea M-Series battery switches and 360 Panel outer frame bezels are sold separately depending on your layout requirements.
Streamline Your Electrical Fit-Out
Upgrade your power distribution layout with a professional, modular finish. Add the Blue Sea Panel 360 M-Series mounting module to your build list today to achieve a clean, reliable, and clearly labelled battery switch installation.
SKU: BS-1139B
SPECIFICATIONS
| Specification | Details |
|---|---|
| Product type | Blank panel |
| Compatible products | M-Series Battery Switches |
| Function | Mounting accessory |
| SKU: | BS-1139B |
| Model #: | BS-1139B |
| MPN: | BS-1139B |
| HS code: | 8536509025 |
| Country of origin: | MX |
| Package weight: | 0.06 kg |
| Package length: | 0.12 m |
| Package width: | 0.1 m |
| Package height: | 0.03 m |
WARRANTY
Blue Sea Warranty Policy
Blue Sea Systems products sold by us are supplied with a warranty against defects for the warranty period shown below, subject to the product type, application and the terms of this warranty policy.
The express warranty provided by us is limited to a maximum of 5 years from the original date of purchase, unless otherwise required under Australian Consumer Law.
Blue Sea Systems may offer longer manufacturer support on some products at their discretion
Warranty Lengths by Product Range
| Blue Sea Product Range | Warranty Length | Application / Notes |
|---|---|---|
| Most Blue Sea Systems Products | 5 years | Applies to most Blue Sea Systems products found to be defective in materials or manufacture. |
| P12 Battery Chargers | 5 years | Warranty period starts from the original date of purchase. |
| P12 Remote Displays | 5 years | Warranty period starts from the original date of purchase. |
| Digital Meters | 3 years | Warranty period starts from the original date of purchase. |
| Vessel System Monitors | 3 years | Warranty period starts from the original date of purchase. |
Warranty Assessment and Remedy
If a Blue Sea Systems product is found to be defective in materials or manufacture within the applicable warranty period, we will, at our discretion, arrange a repair, replacement, store credit or refund, depending on the nature of the fault and the requirements of Australian Consumer Law.
Products may need to be returned for assessment before a warranty claim can be approved. Where required, the product must be returned with dated proof of purchase and a clear description of the fault.
Labour costs for removing, replacing, reinstalling or diagnosing a product are not covered by this express warranty unless otherwise required under Australian Consumer Law.
Making a Warranty Claim
To make a warranty claim, please contact us with your dated proof of purchase, product details and a description of the fault.
The product may need to be returned for inspection before the claim can be assessed. If the product is confirmed to be faulty and covered by this warranty, we will advise the available remedy.
What This Warranty Does Not Cover
This warranty does not cover faults or damage caused by incorrect installation, incorrect application, misuse, abuse, neglect, unauthorised modification, accidental damage, normal wear and tear, environmental damage, or failure to use the product in accordance with the manufacturer's instructions.
- Incorrect installation or wiring
- Incorrect product selection or application
- Misuse, abuse or neglect
- Physical or accidental damage
- Water ingress or environmental damage outside the product's intended use
- Unauthorised modification or repair
- Normal wear and tear
- Labour costs for removal, replacement, reinstallation or diagnosis
- Freight, travel or call-out costs unless otherwise required by law
- Products not returned for assessment when reasonably required
Manufacturer Support
Blue Sea Systems may provide additional manufacturer support on some products beyond the warranty period listed above. Where available, we may assist customers in contacting the manufacturer, but any manufacturer support beyond the express warranty period is subject to the manufacturer's own terms and continued availability.
Australian Consumer Law
This warranty is in addition to other rights and remedies available at law. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.







Pre-Wired Boards
4x4/Canopy Power Systems
Solar Kits
Inverter Kits
Charger Kits
Battery Kits
Monitoring Kits































