Blue Sea 30A 10-Circuit Terminal Block
Blue Sea 30A 10-Circuit Terminal Block
Closed-Back Insulated Base with Isolated Screw Pairs & High Barriers

DESCRIPTION
Reliable Multi-Circuit Power Distribution for Marine and Off-Grid Systems
Managing multiple electrical feeds in a compact space requires components that prioritise both organisation and safety. The Blue Sea 30A 10-Circuit Terminal Block provides a structured, reliable solution for consolidating wiring in marine vessels, caravans, 4WDs, and custom off-grid setups. Designed to handle up to 30A per circuit, this terminal block allows system builders and auto electricians to neatly terminate, join, or branch up to ten separate wiring lines without relying on messy inline splices or overcrowded battery posts.
Engineered for Electrical Isolation and Safety
A standout feature of this Blue Sea Systems component is its fully closed-back architecture. Unlike open-back alternatives that leave live contacts exposed on the underside, the insulated base completely separates the electrical conductors from the mounting surface. This design reduces the risk of accidental short circuits or ground faults when installing the block directly onto conductive metal bulkheads, aluminium canopies, or steel chassis rails.
On the top side, each of the ten circuits is arranged as an independent screw pair separated by high, moulded isolation barriers. These physical dividers help prevent stray wire strands or shifting ring terminals from bridging adjacent circuits, even in high-vibration environments typical of off-road touring and rough seas.
Key Features and Benefits
- Closed-Back Insulated Base: Completely isolates live power from the mounting panel, allowing safe installation on metal surfaces without secondary insulation pads.
- 10 Independent Circuits: Each opposing screw pair forms a dedicated, isolated feed for straightforward point-to-point wiring connections.
- High-Barrier Moulding: Raised physical barriers between screw terminals minimize the risk of accidental shorting during installation or maintenance.
- Flexible Configuration: Compatible with terminal block jumpers to easily link adjacent screw pairs and create common positive or negative bus sections.
- Integrated Mounting Holes: Pre-drilled holes at each end allow for straightforward, secure surface mounting in electrical cabinets, consoles, and lockers.
Why Upgrade from Standard Grade Terminal Blocks?
Substandard terminal blocks often suffer from brittle plastics that crack under tightening torque, or shallow dividers that allow terminals to rotate and touch. The Blue Sea 2510 series is built to withstand demanding mobile and marine environments. By providing a dedicated, robust termination point for each wire, it simplifies fault-finding and future system upgrades—allowing you to test individual circuits with a multimeter or disconnect specific accessories without disturbing the rest of your wiring harness.
Versatile Applications
Whether you are wiring a helm station on a boat, setting up a 12V or 24V control panel in a camper trailer, or organising sensor and lighting feeds in an industrial enclosure, this 10-circuit block delivers clean, serviceable results.
Streamline Your Wiring Layout
Upgrade your electrical installation with a safer, more organised connection layout. Add the Blue Sea 30A 10-Circuit Terminal Block to your project today for professional-grade circuit management across your marine, RV, or off-grid power system.
SKU: BS-2510B
SPECIFICATIONS
| Specification | Details |
|---|---|
| Product type | Terminal block |
| Maximum current | 30A |
| Number of circuits | 10 |
| Design | Closed back; insulates power from the mounting surface |
| Circuit arrangement | Each screw pair is one isolated circuit |
| Jumpers | Allow creation of common circuits |
| SKU: | BS-2510B |
| Model #: | BS-2510B |
| MPN: | BS-2510B |
| HS code: | 8536904000 |
| Country of origin: | MX |
| Package weight: | 0.18 kg |
| Package length: | 0.2 m |
| Package width: | 0.05 m |
| Package height: | 0.03 m |
WARRANTY
Blue Sea Warranty Policy
Blue Sea Systems products sold by us are supplied with a warranty against defects for the warranty period shown below, subject to the product type, application and the terms of this warranty policy.
The express warranty provided by us is limited to a maximum of 5 years from the original date of purchase, unless otherwise required under Australian Consumer Law.
Blue Sea Systems may offer longer manufacturer support on some products at their discretion
Warranty Lengths by Product Range
| Blue Sea Product Range | Warranty Length | Application / Notes |
|---|---|---|
| Most Blue Sea Systems Products | 5 years | Applies to most Blue Sea Systems products found to be defective in materials or manufacture. |
| P12 Battery Chargers | 5 years | Warranty period starts from the original date of purchase. |
| P12 Remote Displays | 5 years | Warranty period starts from the original date of purchase. |
| Digital Meters | 3 years | Warranty period starts from the original date of purchase. |
| Vessel System Monitors | 3 years | Warranty period starts from the original date of purchase. |
Warranty Assessment and Remedy
If a Blue Sea Systems product is found to be defective in materials or manufacture within the applicable warranty period, we will, at our discretion, arrange a repair, replacement, store credit or refund, depending on the nature of the fault and the requirements of Australian Consumer Law.
Products may need to be returned for assessment before a warranty claim can be approved. Where required, the product must be returned with dated proof of purchase and a clear description of the fault.
Labour costs for removing, replacing, reinstalling or diagnosing a product are not covered by this express warranty unless otherwise required under Australian Consumer Law.
Making a Warranty Claim
To make a warranty claim, please contact us with your dated proof of purchase, product details and a description of the fault.
The product may need to be returned for inspection before the claim can be assessed. If the product is confirmed to be faulty and covered by this warranty, we will advise the available remedy.
What This Warranty Does Not Cover
This warranty does not cover faults or damage caused by incorrect installation, incorrect application, misuse, abuse, neglect, unauthorised modification, accidental damage, normal wear and tear, environmental damage, or failure to use the product in accordance with the manufacturer's instructions.
- Incorrect installation or wiring
- Incorrect product selection or application
- Misuse, abuse or neglect
- Physical or accidental damage
- Water ingress or environmental damage outside the product's intended use
- Unauthorised modification or repair
- Normal wear and tear
- Labour costs for removal, replacement, reinstallation or diagnosis
- Freight, travel or call-out costs unless otherwise required by law
- Products not returned for assessment when reasonably required
Manufacturer Support
Blue Sea Systems may provide additional manufacturer support on some products beyond the warranty period listed above. Where available, we may assist customers in contacting the manufacturer, but any manufacturer support beyond the express warranty period is subject to the manufacturer's own terms and continued availability.
Australian Consumer Law
This warranty is in addition to other rights and remedies available at law. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.







Pre-Wired Boards
4x4/Canopy Power Systems
Solar Kits
Inverter Kits
Charger Kits
Battery Kits
Monitoring Kits































