Blue Sea 300A C-Series Triple-Pole Flat Rocker Circuit Breaker
Blue Sea 300A C-Series Triple-Pole Flat Rocker Circuit Breaker
Magnetic-Hydraulic Overcurrent Protection with 5/16" (M8) Studs

DESCRIPTION
Heavy-Duty Switching and Overcurrent Protection for High-Amperage Systems
Managing high-current loads in marine, caravan, and off-grid power systems requires components that can handle substantial electrical demand without compromising safety. The Blue Sea C-Series 300A Triple-Pole Flat Rocker Circuit Breaker integrates manual on-off switching with dependable overcurrent protection in a single, consolidated unit. By utilising a paralleled three-pole architecture, this magnetic-hydraulic breaker effectively distributes the 300A load across three internal pathways, operating via a single rocker actuator. This makes it an ideal primary protection device for heavy-duty circuits serving large inverters, bow thrusters, and marine windlasses.
Engineered for Safety and Operational Clarity
Unlike standard thermal breakers that can suffer from nuisance tripping in hot engine bays or battery compartments, the C-Series utilises a magnetic-hydraulic mechanism. This ensures the trip curve remains stable across a wide range of ambient temperatures, providing consistent protection when your system needs it most. Furthermore, the internal trip-free design ensures that the circuit breaker cannot be manually held in the closed (ON) position during an active fault condition, protecting both the operator and expensive downstream electronics from severe thermal damage.
The flat rocker actuator is specifically shaped to sit flush with the mounting bezel when in the ON position. This low-profile contour significantly reduces the risk of accidental switching in tight quarters or busy utility spaces, while a high-visibility colour indicator clearly displays when the unit is switched to the OFF position.
- Consolidated 300A Protection: Combines switching and circuit protection into one device, eliminating the need for a separate heavy-duty battery switch and fuse holder.
- Flush-Mount Flat Rocker: Minimises accidental actuation while providing clear visual confirmation of the OFF state.
- Trip-Free Safety Mechanism: Prevents the contacts from being forced closed during an overcurrent fault, reducing the risk of wiring fires and equipment failure.
- Heavy-Duty Terminations: Paralleled poles feature a robust 5/16-inch (approx. M8) stud connection on the bus to accommodate large-gauge battery and inverter cables securely.
- Secure Panel Installation: Equipped with threaded brass mounting inserts for reliable, vibration-resistant front panel installation.
Built for Demanding Marine and Off-Grid Environments
High-amperage DC circuits are unforgiving of poor connections. Inferior circuit protection devices often feature undersized terminals that generate excess heat under continuous load, leading to voltage drop and melted enclosures. The BS-7554B addresses this by providing substantial 5/16-inch (approx. M8) rear stud terminals on a common bus, allowing for proper torque application on heavy-duty ring terminals. Whether you are wiring a high-output 12V, 24V, or 48V inverter bank in an off-grid cabin or safeguarding a critical bow thruster on a commercial vessel, this breaker delivers industrial-grade reliability.
Ideal Applications
- Primary DC overcurrent protection and isolation for high-capacity inverters
- Circuit protection for high-draw marine equipment including bow thrusters and anchor windlasses
- Main battery bank isolation and protection in 4WD canopies, RVs, and off-grid power walls
- Commercial automotive and industrial DC distribution panels
Upgrade Your High-Current Circuit Protection
Ensure your high-draw electrical equipment is properly safeguarded against overloads and short circuits. Add the Blue Sea C-Series 300A Triple-Pole Circuit Breaker to your system setup today for streamlined, professional-grade power management.
SKU: BS-7554B
SPECIFICATIONS
| Specification | Value |
|---|---|
| Product type | Circuit breaker |
| Switching function | On-off |
| Terminal size | 5/16-inch stud |
| SKU: | BS-7554B |
| Model #: | BS-7554B |
| MPN: | BS-7554B |
| HS code: | 8536200040 |
| Country of origin: | MX |
| Package weight: | 0.54 kg |
| Package length: | 0.12 m |
| Package width: | 0.08 m |
| Package height: | 0.09 m |
WARRANTY
Blue Sea Warranty Policy
Blue Sea Systems products sold by us are supplied with a warranty against defects for the warranty period shown below, subject to the product type, application and the terms of this warranty policy.
The express warranty provided by us is limited to a maximum of 5 years from the original date of purchase, unless otherwise required under Australian Consumer Law.
Blue Sea Systems may offer longer manufacturer support on some products at their discretion
Warranty Lengths by Product Range
| Blue Sea Product Range | Warranty Length | Application / Notes |
|---|---|---|
| Most Blue Sea Systems Products | 5 years | Applies to most Blue Sea Systems products found to be defective in materials or manufacture. |
| P12 Battery Chargers | 5 years | Warranty period starts from the original date of purchase. |
| P12 Remote Displays | 5 years | Warranty period starts from the original date of purchase. |
| Digital Meters | 3 years | Warranty period starts from the original date of purchase. |
| Vessel System Monitors | 3 years | Warranty period starts from the original date of purchase. |
Warranty Assessment and Remedy
If a Blue Sea Systems product is found to be defective in materials or manufacture within the applicable warranty period, we will, at our discretion, arrange a repair, replacement, store credit or refund, depending on the nature of the fault and the requirements of Australian Consumer Law.
Products may need to be returned for assessment before a warranty claim can be approved. Where required, the product must be returned with dated proof of purchase and a clear description of the fault.
Labour costs for removing, replacing, reinstalling or diagnosing a product are not covered by this express warranty unless otherwise required under Australian Consumer Law.
Making a Warranty Claim
To make a warranty claim, please contact us with your dated proof of purchase, product details and a description of the fault.
The product may need to be returned for inspection before the claim can be assessed. If the product is confirmed to be faulty and covered by this warranty, we will advise the available remedy.
What This Warranty Does Not Cover
This warranty does not cover faults or damage caused by incorrect installation, incorrect application, misuse, abuse, neglect, unauthorised modification, accidental damage, normal wear and tear, environmental damage, or failure to use the product in accordance with the manufacturer's instructions.
- Incorrect installation or wiring
- Incorrect product selection or application
- Misuse, abuse or neglect
- Physical or accidental damage
- Water ingress or environmental damage outside the product's intended use
- Unauthorised modification or repair
- Normal wear and tear
- Labour costs for removal, replacement, reinstallation or diagnosis
- Freight, travel or call-out costs unless otherwise required by law
- Products not returned for assessment when reasonably required
Manufacturer Support
Blue Sea Systems may provide additional manufacturer support on some products beyond the warranty period listed above. Where available, we may assist customers in contacting the manufacturer, but any manufacturer support beyond the express warranty period is subject to the manufacturer's own terms and continued availability.
Australian Consumer Law
This warranty is in addition to other rights and remedies available at law. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.







Pre-Wired Boards
4x4/Canopy Power Systems
Solar Kits
Inverter Kits
Charger Kits
Battery Kits
Monitoring Kits































