Solar Panels
Solar Controllers
Batteries
Inverters
Mains Chargers
DC-DC Chargers
Cables/Accessories
Power Converters
Monitoring
Kits
Blue Sea 300A Red Mini m-Series 3 Position (OFF/1/2) Battery Selector Switch
Blue Sea 300A Red Mini m-Series 3 Position (OFF/1/2) Battery Selector Switch
Compact red Off, 1 or 2 battery selection for high-current DC battery management in marine and mobile systems.
Regular price
$89.00
Availability:
In Stock
View all products from Blue Sea
Guaranteed Safe and Secure Checkout
2
DESCRIPTION
Blue Sea m-Series 3 Position Battery Selector Switch
The Blue Sea m-Series 3 Position Battery Selector Switch is a compact, high-current DC battery switch designed for selecting between two isolated battery inputs and an off position. With its red knob, clear Off, 1 and 2 operation, and 300A continuous current rating, it is well suited to marine, RV, 4WD canopy, service vehicle and compact auxiliary battery installations where a robust manual selector is preferred.
This model is the Blue Sea 6008, a red selector switch from the m-Series manual battery switch range. It provides three switch positions, two battery inputs and no battery combine function, making it suitable where the requirement is to choose battery bank 1 or battery bank 2 to supply loads rather than paralleling both banks.
Built for High-Current DC Battery Switching
The 6008 is rated for a maximum voltage of 32V DC and has a 300A continuous rating, 500A intermittent rating for 5 minutes, and 900A starting rating for 30 seconds. That current capacity makes it a practical choice for many low-voltage DC systems using suitably sized cabling and correctly rated circuit protection.
Blue Sea specifies tin-plated copper terminal studs for conductivity and corrosion resistance. The 3/8 in - 16 studs suit M10 ring terminals, and the one-piece terminal stud design is intended to remain secure over time. Cable size to meet the stated ratings is 4/0 AWG, with terminal stud torque specified at 120 in-lb, or 13.56 Nm.
- Three-position selector: Off, battery input 1 or battery input 2 operation for straightforward manual battery selection.
- 300A continuous rating: Supports demanding DC battery switching applications when installed with cable sized to the rating.
- 32V DC maximum: Suitable for common 12V and 24V DC battery systems within the manufacturer’s voltage limit.
- Ignition protected: Manufacturer states it is safe for installation aboard gasoline powered boats.
- Flexible mounting: Case design allows surface or rear panel mounting.
Compact m-Series Design
The m-Series format is designed to provide a compact switch footprint without stepping down to a light-duty battery isolator. Blue Sea states the case design allows surface or rear panel mounting, helping installers place the selector switch in battery compartments, electrical lockers, switch panels or other controlled mounting locations where access and cable routing are considered during system design.
The isolating rear cover design helps protect rear contacts and allows wire access from different directions. This is useful in tight installations where large battery cables need to be routed cleanly without excessive bend stress. Mounting holes accept #10 screws, and the manufacturer lists cable clearance for 4/0 AWG cables as 1.12 in, or 28.45 mm.
For Marine and Mobile Battery Management
This switch is intended for manual battery management rather than automatic charging or voltage sensing. It suits applications where the operator needs a simple, physical battery selector for DC loads. In marine installations, it can form part of a properly designed battery switching system using the latest applicable standards, appropriately rated cabling, terminals, fusing and installation practices.
Manufacturer instructions state that positive battery power should be disconnected before installation, appliances should be turned off before turning the battery switch to OFF, and the switch should not be turned to OFF while the engine is running. Correct installation is important for high-current DC systems, especially where alternators, starter motors, charge sources and battery banks are involved.
Choose the Blue Sea 6008 for a compact, clearly labelled red battery selector switch that provides dependable manual Off, 1 or 2 control for well-planned DC battery systems.
SPECIFICATIONS
Specifications
| Brand | Blue Sea Systems |
| Manufacturer part number | 6008 |
| Product family | m-Series Manual Battery Switches |
| Switch type | Selector 3 Position |
| Colour | Red |
| Switch positions | 3 |
| Operating positions | Off, 1, 2 |
| Battery inputs | 2 |
| Battery combine | No |
| Alternator Field Disconnect | No |
| Maximum voltage | 32V DC |
| Continuous rating | 300A |
| Intermittent rating | 500A for 5 min |
| Starting rating | 900A for 30 sec |
| Switching rating | 25A |
| Terminal stud size | 3/8 in - 16 (M10) |
| Stud size | 3/8 in |
| Terminal stud torque | 120 in-lb (13.56 Nm) |
| Stud torque | 120 in-lb (13.56 Nm) |
| Stud material | Tinned copper |
| Cable size to meet ratings | 4/0 AWG (120 mm²) / 4/0 AWG (130 mm²) |
| Cable clearance for 4/0 AWG cables | 1.12 in (28.45 mm) |
| Mounting holes | Accept #10 screw |
| Mounting | Surface or rear panel mounting |
| Weight | 0.77 lb (0.35 kg) |
| Regulatory specifications shown by manufacturer | CE, IP66, ISO 8846, UL, Ignition Protected |
| Optional accessory | 7902 Battery Switch ICON Label Kit |
| SKU: | BS-6008 |
| Barcode: | 632085060084 |
WARRANTY
Blue Sea Warranty Policy
Blue Sea Systems products sold by us are supplied with a warranty against defects for the warranty period shown below, subject to the product type, application and the terms of this warranty policy.
The express warranty provided by us is limited to a maximum of 5 years from the original date of purchase, unless otherwise required under Australian Consumer Law.
Blue Sea Systems may offer longer manufacturer support on some products at their discretion
Warranty Lengths by Product Range
| Blue Sea Product Range | Warranty Length | Application / Notes |
|---|---|---|
| Most Blue Sea Systems Products | 5 years | Applies to most Blue Sea Systems products found to be defective in materials or manufacture. |
| P12 Battery Chargers | 5 years | Warranty period starts from the original date of purchase. |
| P12 Remote Displays | 5 years | Warranty period starts from the original date of purchase. |
| Digital Meters | 3 years | Warranty period starts from the original date of purchase. |
| Vessel System Monitors | 3 years | Warranty period starts from the original date of purchase. |
Warranty Assessment and Remedy
If a Blue Sea Systems product is found to be defective in materials or manufacture within the applicable warranty period, we will, at our discretion, arrange a repair, replacement, store credit or refund, depending on the nature of the fault and the requirements of Australian Consumer Law.
Products may need to be returned for assessment before a warranty claim can be approved. Where required, the product must be returned with dated proof of purchase and a clear description of the fault.
Labour costs for removing, replacing, reinstalling or diagnosing a product are not covered by this express warranty unless otherwise required under Australian Consumer Law.
Making a Warranty Claim
To make a warranty claim, please contact us with your dated proof of purchase, product details and a description of the fault.
The product may need to be returned for inspection before the claim can be assessed. If the product is confirmed to be faulty and covered by this warranty, we will advise the available remedy.
What This Warranty Does Not Cover
This warranty does not cover faults or damage caused by incorrect installation, incorrect application, misuse, abuse, neglect, unauthorised modification, accidental damage, normal wear and tear, environmental damage, or failure to use the product in accordance with the manufacturer's instructions.
- Incorrect installation or wiring
- Incorrect product selection or application
- Misuse, abuse or neglect
- Physical or accidental damage
- Water ingress or environmental damage outside the product's intended use
- Unauthorised modification or repair
- Normal wear and tear
- Labour costs for removal, replacement, reinstallation or diagnosis
- Freight, travel or call-out costs unless otherwise required by law
- Products not returned for assessment when reasonably required
Manufacturer Support
Blue Sea Systems may provide additional manufacturer support on some products beyond the warranty period listed above. Where available, we may assist customers in contacting the manufacturer, but any manufacturer support beyond the express warranty period is subject to the manufacturer's own terms and continued availability.
Australian Consumer Law
This warranty is in addition to other rights and remedies available at law. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
