Blue Sea 225A ANL Fuse
Blue Sea 225A ANL Fuse
Silver-Plated Blades, Clear Inspection Window & Forked Terminals

DESCRIPTION
High-Amperage Marine and Off-Grid DC Overcurrent Protection
Engineered for demanding electrical architectures, the Blue Sea 225A ANL Fuse provides dependable overcurrent protection for high-draw DC circuits. In marine, caravan, 4WD, and off-grid solar installations, heavy-duty cabling and sensitive electronics require reliable safeguarding against short circuits and severe current overloads. This 225A fuse is specifically designed to integrate seamlessly into standard ANL fuse blocks, acting as a critical safety barrier between your primary battery bank and high-load appliances such as power inverters, windlasses, bow thrusters, and high-output DC-DC chargers.
Built for Harsh Environments and High Conductivity
Unlike standard automotive fuses that can degrade rapidly when exposed to moisture or salt air, Blue Sea Systems designs circuit protection specifically for harsh marine and mobile environments. The connector blades feature corrosion-resistant silver plating, which maintains superior electrical conductivity over time. By minimising contact resistance at the terminal interface, this fuse reduces unwanted heat generation and prevents nuisance voltage drops across your primary power distribution system.
The main insulating body is constructed from a durable, heat-resistant mica-reinforced housing. This robust construction contains the internal fuse element safely during high-current interruptions. At the centre of the housing, a clear viewing window provides an immediate visual indication of a blown fuse condition, allowing installers and system operators to diagnose open circuits quickly without needing a multimeter.
Key Features and Benefits
- Corrosion-Resistant Blades: Silver-plated connector terminals resist oxidation and corrosion in coastal, marine, and humid conditions.
- Visual Blown-Fuse Window: Clear central inspection window allows for rapid, straightforward visual verification of the internal fuse element.
- Rapid Forked Installation: Open-ended mounting slots allow the fuse to be slid into place without completely removing the fuse block mounting bolts.
- Heat-Resistant Housing: Mica-reinforced insulating body delivers structural stability and thermal resilience under heavy electrical loads.
- High-Current Capability: Rated at 225A to protect heavy-gauge battery cables and high-demand 12V, 24V, or 48V DC equipment.
Why Upgrade to Quality Marine-Grade Circuit Protection?
Substandard circuit protection often suffers from poor terminal plating and imprecise trip curves, leading to premature failure, melted fuse holders, or inadequate cable protection during a dead short. Upgrading to a genuine Blue Sea ANL fuse mitigates the risk of thermal runaway at the terminal studs and ensures predictable interruption when fault currents occur. The forked terminal design also simplifies field replacements; rather than fumbling with loose nuts and washers in tight battery compartments, you only need to loosen the terminal studs slightly to swap the fuse out.
Common Applications
This 225A ANL fuse is ideally suited for main battery bank fusing, heavy-duty inverter circuits, marine auxiliary systems, and commercial vehicle electrical fit-outs. Note that an appropriate ANL fuse block is required for installation and is sold separately.
Secure your high-current DC power system today by adding the Blue Sea 225A ANL Fuse to your electrical installation toolkit for dependable, long-term circuit protection.
SKU: BS-5130B
SPECIFICATIONS
| Specification | Value |
|---|---|
| Product type | Fuse |
| Fuse type | ANL |
| SKU: | BS-5130B |
| Model #: | BS-5130B |
| MPN: | BS-5130B |
| HS code: | 8536100040 |
| Country of origin: | MX |
| Package weight: | 0.024 kg |
| Package length: | 0.1 m |
| Package width: | 0.03 m |
| Package height: | 0.02 m |
WARRANTY
Blue Sea Warranty Policy
Blue Sea Systems products sold by us are supplied with a warranty against defects for the warranty period shown below, subject to the product type, application and the terms of this warranty policy.
The express warranty provided by us is limited to a maximum of 5 years from the original date of purchase, unless otherwise required under Australian Consumer Law.
Blue Sea Systems may offer longer manufacturer support on some products at their discretion
Warranty Lengths by Product Range
| Blue Sea Product Range | Warranty Length | Application / Notes |
|---|---|---|
| Most Blue Sea Systems Products | 5 years | Applies to most Blue Sea Systems products found to be defective in materials or manufacture. |
| P12 Battery Chargers | 5 years | Warranty period starts from the original date of purchase. |
| P12 Remote Displays | 5 years | Warranty period starts from the original date of purchase. |
| Digital Meters | 3 years | Warranty period starts from the original date of purchase. |
| Vessel System Monitors | 3 years | Warranty period starts from the original date of purchase. |
Warranty Assessment and Remedy
If a Blue Sea Systems product is found to be defective in materials or manufacture within the applicable warranty period, we will, at our discretion, arrange a repair, replacement, store credit or refund, depending on the nature of the fault and the requirements of Australian Consumer Law.
Products may need to be returned for assessment before a warranty claim can be approved. Where required, the product must be returned with dated proof of purchase and a clear description of the fault.
Labour costs for removing, replacing, reinstalling or diagnosing a product are not covered by this express warranty unless otherwise required under Australian Consumer Law.
Making a Warranty Claim
To make a warranty claim, please contact us with your dated proof of purchase, product details and a description of the fault.
The product may need to be returned for inspection before the claim can be assessed. If the product is confirmed to be faulty and covered by this warranty, we will advise the available remedy.
What This Warranty Does Not Cover
This warranty does not cover faults or damage caused by incorrect installation, incorrect application, misuse, abuse, neglect, unauthorised modification, accidental damage, normal wear and tear, environmental damage, or failure to use the product in accordance with the manufacturer's instructions.
- Incorrect installation or wiring
- Incorrect product selection or application
- Misuse, abuse or neglect
- Physical or accidental damage
- Water ingress or environmental damage outside the product's intended use
- Unauthorised modification or repair
- Normal wear and tear
- Labour costs for removal, replacement, reinstallation or diagnosis
- Freight, travel or call-out costs unless otherwise required by law
- Products not returned for assessment when reasonably required
Manufacturer Support
Blue Sea Systems may provide additional manufacturer support on some products beyond the warranty period listed above. Where available, we may assist customers in contacting the manufacturer, but any manufacturer support beyond the express warranty period is subject to the manufacturer's own terms and continued availability.
Australian Consumer Law
This warranty is in addition to other rights and remedies available at law. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.







Pre-Wired Boards
4x4/Canopy Power Systems
Solar Kits
Inverter Kits
Charger Kits
Battery Kits
Monitoring Kits































