Blue Sea 14.22mm Cable Clam Cable Seal with Stainless Steel Cover
Blue Sea 14.22mm Cable Clam Cable Seal with Stainless Steel Cover
Waterproof No-Cut Connector Pass-Through with Pre-Slit Rubber Seals

DESCRIPTION
Waterproof Marine Cable Pass-Through for Antenna and Transducer Wiring
Routing coaxial, radar, and transducer wiring through a boat deck or cabin bulkhead often presents a major installation hurdle: large factory-terminated plugs. The Blue Sea Systems 14.22mm Cable Clam provides a reliable, waterproof deck gland solution that allows you to feed cables through surfaces without cutting off and re-crimping delicate factory-installed connectors. By preserving the original factory termination, you eliminate the risk of signal loss, poor crimps, and voided electronics warranties.
Engineered for Harsh Marine and Off-Grid Environments
Standard plastic deck glands and messy silicone-filled entry points quickly degrade under intense Australian UV exposure, leading to water ingress and costly interior damage. This heavy-duty cable seal resolves these common failure points by combining a multi-part compression housing with a polished stainless steel dress cap. The protective cover not only shields the internal rubber components from harsh solar radiation, preventing premature cracking and perishing, but also conceals the mounting screws for a clean, OEM-grade aesthetic on your vessel or off-grid vehicle.
Streamlined, Watertight Installation
Designed to save time during marine electronics fit-outs, this unit comes supplied with pre-drilled and pre-slit rubber seals alongside a lower sealing gasket. Rather than struggling to thread a long cable run through a tight grommet, you simply pass the connector through the mounting base, wrap the slit rubber bung around the cable jacket, and compress the assembly together using the included stainless steel fasteners. As the housing tightens, it forms a flush, watertight barrier against the mounting surface and around the cable itself.
Key Features and Benefits
- Preserves Factory Terminations: Accommodates large connectors during routing, avoiding the need to cut, splice, or re-terminate coaxial and communication cables.
- Pre-Drilled and Slit Rubber Seals: Wraps directly around the cable for a straightforward, time-saving installation and a dependable waterproof seal.
- UV-Protective Stainless Steel Cover: Shields the internal elastomer seal from sun damage while concealing mounting hardware for a neat, low-profile finish.
- Complete Mounting Assembly: Includes the inner mounting ring, main compression housing, lower deck gasket, and marine-grade stainless steel fasteners.
- Reduced Snag Hazard: Contoured edges prevent lines, ropes, and equipment from catching on the deck fitting.
Ideal Applications and Installation Notes
While purpose-built for marine vessels routing VHF antennas, GPS receivers, radar domes, and solar wiring, this 14.22mm cable gland is equally effective for caravan, RV, and 4WD roof penetrations where weatherproofing is critical.
Important Installation Limitation: This cable clam is engineered strictly for above the waterline use only. It must not be installed in submerged hull locations.
Upgrade Your Cable Routing
Protect your vessel and mobile electronics from moisture ingress without compromising your factory wiring. Add the Blue Sea 14.22mm Cable Clam to your fit-out kit today for a clean, watertight, and durable cable entry installation.
SKU: BS-1003100B
SPECIFICATIONS
| Specification | Details |
|---|---|
| Product type | Cable seal |
| Entry style | Cable clam |
| Cable size stated in title | 14.22mm |
| Application | Waterproof pass-through for antenna cables |
| Connector installation | Pass-through does not require removal of the factory-installed connector |
| Seals | Pre-drilled and slit rubber seals |
| Dress cap | Polished stainless steel; conceals mounting hardware and offers protection from UV |
| Fasteners | Stainless steel fasteners included |
| Mounting location | Above the waterline only |
| SKU: | BS-1003100B |
| Model #: | BS-1003100B |
| MPN: | BS-1003100B |
| HS code: | 3926909989 |
| Country of origin: | MX |
| Package weight: | 0.216 kg |
| Package length: | 0.1 m |
| Package width: | 0.1 m |
| Package height: | 0.06 m |
WARRANTY
Blue Sea Warranty Policy
Blue Sea Systems products sold by us are supplied with a warranty against defects for the warranty period shown below, subject to the product type, application and the terms of this warranty policy.
The express warranty provided by us is limited to a maximum of 5 years from the original date of purchase, unless otherwise required under Australian Consumer Law.
Blue Sea Systems may offer longer manufacturer support on some products at their discretion
Warranty Lengths by Product Range
| Blue Sea Product Range | Warranty Length | Application / Notes |
|---|---|---|
| Most Blue Sea Systems Products | 5 years | Applies to most Blue Sea Systems products found to be defective in materials or manufacture. |
| P12 Battery Chargers | 5 years | Warranty period starts from the original date of purchase. |
| P12 Remote Displays | 5 years | Warranty period starts from the original date of purchase. |
| Digital Meters | 3 years | Warranty period starts from the original date of purchase. |
| Vessel System Monitors | 3 years | Warranty period starts from the original date of purchase. |
Warranty Assessment and Remedy
If a Blue Sea Systems product is found to be defective in materials or manufacture within the applicable warranty period, we will, at our discretion, arrange a repair, replacement, store credit or refund, depending on the nature of the fault and the requirements of Australian Consumer Law.
Products may need to be returned for assessment before a warranty claim can be approved. Where required, the product must be returned with dated proof of purchase and a clear description of the fault.
Labour costs for removing, replacing, reinstalling or diagnosing a product are not covered by this express warranty unless otherwise required under Australian Consumer Law.
Making a Warranty Claim
To make a warranty claim, please contact us with your dated proof of purchase, product details and a description of the fault.
The product may need to be returned for inspection before the claim can be assessed. If the product is confirmed to be faulty and covered by this warranty, we will advise the available remedy.
What This Warranty Does Not Cover
This warranty does not cover faults or damage caused by incorrect installation, incorrect application, misuse, abuse, neglect, unauthorised modification, accidental damage, normal wear and tear, environmental damage, or failure to use the product in accordance with the manufacturer's instructions.
- Incorrect installation or wiring
- Incorrect product selection or application
- Misuse, abuse or neglect
- Physical or accidental damage
- Water ingress or environmental damage outside the product's intended use
- Unauthorised modification or repair
- Normal wear and tear
- Labour costs for removal, replacement, reinstallation or diagnosis
- Freight, travel or call-out costs unless otherwise required by law
- Products not returned for assessment when reasonably required
Manufacturer Support
Blue Sea Systems may provide additional manufacturer support on some products beyond the warranty period listed above. Where available, we may assist customers in contacting the manufacturer, but any manufacturer support beyond the express warranty period is subject to the manufacturer's own terms and continued availability.
Australian Consumer Law
This warranty is in addition to other rights and remedies available at law. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.







Pre-Wired Boards
4x4/Canopy Power Systems
Solar Kits
Inverter Kits
Charger Kits
Battery Kits
Monitoring Kits































