Blue Sea 12-24VDC 4 Position Backlight System for Circuit Breaker Panels
Blue Sea 12-24VDC 4 Position Backlight System for Circuit Breaker Panels
Modular LED PCB with Reverse Polarity Protection & 18 AWG Wire Leads

DESCRIPTION
Reliable Illumination for Marine and Off-Grid DC Distribution
Engineered for Seamless Integration with Blue Sea Systems Panels
Operating a vessel, caravan, or off-grid power setup in low-light conditions requires clear visibility of your electrical controls. The Blue Sea Systems 4 Position Backlight System provides crisp, uniform illumination for compatible circuit breaker panels, ensuring you can accurately identify and switch critical loads at night without compromising your night vision.
Designed to operate seamlessly across both 12V and 24V DC electrical systems, this modular Printed Circuit Board (PCB) integrates directly behind four-position breaker layouts. While backlighting comes standard on many pre-assembled Blue Sea Systems distribution panels, this dedicated component is the exact factory-grade solution required for custom builds, retrofits, or servicing existing marine and automotive dashboards.
Engineered for Electrical Safety and Longevity
Inferior lighting alternatives often suffer from premature burnout due to voltage fluctuations in mobile environments, or worse, cause electrical faults during installation. The BS-8384B addresses these risks with precision on-board power management. Featuring discrete current-limiting resistors and an integrated voltage regulator, the board maintains stable current flow to the LED array even during battery charging cycles when system voltages spike.
Additionally, built-in reverse polarity protection safeguards the sensitive electronic components against accidental miswiring during installation. This reduces the risk of damaging the circuit board when working in tight, dimly lit helm stations or electrical cabinets.
Key Features and Technical Advantages
- Dual-Voltage Compatibility: Operates reliably across 12V to 24V DC input ranges without requiring external voltage reducers.
- Integrated Reverse Polarity Protection: On-board power management prevents component failure if positive and negative leads are inadvertently swapped.
- Consistent LED Illumination: Multi-LED array with discrete current-limiting resistors ensures even light distribution across all four circuit breaker label positions.
- Pre-Wired for Easy Termination: Supplied with two 6-inch (approx. 152mm) 18 AWG (approx. 0.82mm2) wire leads for straightforward connection to your DC busbar or power source.
- Low-Profile Modular PCB: Compact circuit board architecture fits neatly behind compatible Blue Sea Systems panels without obstructing heavy-duty breaker wiring.
Ideal Applications
Whether you are a marine electrician refitting a commercial vessel or a DIY enthusiast upgrading a 4WD canopy, clear switchboard labelling is essential for operational safety. This 4-position backlight module is suited for:
- Marine helm stations and flybridge dash panels requiring glare-free night visibility
- Caravan, camper trailer, and motorhome 12V/24V control centres
- Service vehicles and mobile workstations operating in dark environments
- Direct OEM replacement for damaged or aged backlighting in existing Blue Sea Systems panels
Upgrade Your Switchboard Visibility
Ensure safe, accurate operation of your DC distribution system at any hour. Add the Blue Sea Systems 4 Position Backlight System to your electrical setup for dependable, factory-matched panel illumination.
SKU: BS-8384B
SPECIFICATIONS
| Specification | Details |
|---|---|
| Product type | Backlight system |
| Position | 4 position |
| Supply voltage | 12-24VDC |
| Compatibility | Blue Sea Systems circuit breaker panels |
| Connection leads | Two 6-inch 18 AWG wire leads |
| Protection | Built-in reverse polarity protection |
| Panel backlighting | Standard on panels; no kit required |
| SKU: | BS-8384B |
| Model #: | BS-8384B |
| MPN: | BS-8384B |
| HS code: | 8536200040 |
| Country of origin: | TW |
| Package weight: | 0.06 kg |
| Package length: | 0.12 m |
| Package width: | 0.08 m |
| Package height: | 0.04 m |
WARRANTY
Blue Sea Warranty Policy
Blue Sea Systems products sold by us are supplied with a warranty against defects for the warranty period shown below, subject to the product type, application and the terms of this warranty policy.
The express warranty provided by us is limited to a maximum of 5 years from the original date of purchase, unless otherwise required under Australian Consumer Law.
Blue Sea Systems may offer longer manufacturer support on some products at their discretion
Warranty Lengths by Product Range
| Blue Sea Product Range | Warranty Length | Application / Notes |
|---|---|---|
| Most Blue Sea Systems Products | 5 years | Applies to most Blue Sea Systems products found to be defective in materials or manufacture. |
| P12 Battery Chargers | 5 years | Warranty period starts from the original date of purchase. |
| P12 Remote Displays | 5 years | Warranty period starts from the original date of purchase. |
| Digital Meters | 3 years | Warranty period starts from the original date of purchase. |
| Vessel System Monitors | 3 years | Warranty period starts from the original date of purchase. |
Warranty Assessment and Remedy
If a Blue Sea Systems product is found to be defective in materials or manufacture within the applicable warranty period, we will, at our discretion, arrange a repair, replacement, store credit or refund, depending on the nature of the fault and the requirements of Australian Consumer Law.
Products may need to be returned for assessment before a warranty claim can be approved. Where required, the product must be returned with dated proof of purchase and a clear description of the fault.
Labour costs for removing, replacing, reinstalling or diagnosing a product are not covered by this express warranty unless otherwise required under Australian Consumer Law.
Making a Warranty Claim
To make a warranty claim, please contact us with your dated proof of purchase, product details and a description of the fault.
The product may need to be returned for inspection before the claim can be assessed. If the product is confirmed to be faulty and covered by this warranty, we will advise the available remedy.
What This Warranty Does Not Cover
This warranty does not cover faults or damage caused by incorrect installation, incorrect application, misuse, abuse, neglect, unauthorised modification, accidental damage, normal wear and tear, environmental damage, or failure to use the product in accordance with the manufacturer's instructions.
- Incorrect installation or wiring
- Incorrect product selection or application
- Misuse, abuse or neglect
- Physical or accidental damage
- Water ingress or environmental damage outside the product's intended use
- Unauthorised modification or repair
- Normal wear and tear
- Labour costs for removal, replacement, reinstallation or diagnosis
- Freight, travel or call-out costs unless otherwise required by law
- Products not returned for assessment when reasonably required
Manufacturer Support
Blue Sea Systems may provide additional manufacturer support on some products beyond the warranty period listed above. Where available, we may assist customers in contacting the manufacturer, but any manufacturer support beyond the express warranty period is subject to the manufacturer's own terms and continued availability.
Australian Consumer Law
This warranty is in addition to other rights and remedies available at law. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.







Pre-Wired Boards
4x4/Canopy Power Systems
Solar Kits
Inverter Kits
Charger Kits
Battery Kits
Monitoring Kits































