Lithium Compatible Battery Charger
LiFePO4-ready 240V mains chargers for 12V, 24V, 36V and 48V lithium battery banks
Lithium Battery Chargers for LiFePO4 Systems
A lithium battery charger needs the correct charge profile, not just the correct voltage. Every charger in this collection has a lithium-compatible charge algorithm, so your LiFePO4 battery reaches a full charge without the high equalisation or boost voltages used on older lead-acid chargers. The range covers 12V, 24V, 36V and 48V mains chargers from Victron and Enerdrive. Options run from compact 1.1A maintainers to 100A industrial units for caravans, RVs, boats, 4WDs, trucks, tiny homes and off-grid sites.
A charger built for lead-acid batteries can undercharge or overstress lithium cells. Our guide to charging LiFePO4 batteries with a lead-acid charger explains the risks.
Victron and Enerdrive Lithium Charger Series
- Victron Blue Smart IP65: Compact 12V and 24V chargers from 4A to 25A, plus a 6V/12V 1.1A model. They have built-in Bluetooth for setup and monitoring through the VictronConnect app.
- Victron Blue Smart IP67: Waterproof 12V and 24V chargers from 5A to 25A. They suit engine bays, boats and exposed locations.
- Victron Blue Smart IP22: Indoor 12V and 24V chargers from 12A to 30A. Three-output (3) multi-bank versions are available.
- Victron Phoenix Smart IP43: Higher-output chargers, including 12/30, 12/50, 24/16, 24/25 and 48/13 models. They come in (1+1) or (3) output configurations.
- Victron Skylla-IP65 and Skylla-i: Heavy-duty chargers for large banks. Models include the 12/70 and 24/35 with 120-240V input, and the 24/80 and 24/100.
- Enerdrive ePower: 12V multi-bank chargers from 20A to 100A, plus 24V 30A and 48V 35A industrial models for commercial and fleet use.
If you need to charge a start battery and a house battery from one unit, see our multi-bank battery chargers.
Getting the LiFePO4 Charging Voltage Right
A 12V LiFePO4 battery is technically at 100% at 3.65V per cell, or 14.6V. For a practical balance of capacity, cell balancing and service life, we recommend 14.2V bulk/absorption and 13.5V float. At 14.2V the battery is roughly 99% full, which keeps it below the upper voltage limit and still allows effective passive cell balancing. Smart chargers with adjustable or app-selectable lithium profiles let you match these settings to your battery manufacturer's specifications.
Sizing and Selection Tips
- Match system voltage: Choose a charger rated for your 12V, 24V, 36V or 48V battery bank.
- Size the charge current: Stay within your battery's maximum charge rate and BMS limits. A larger battery bank, or a short time on mains power, calls for a higher-current charger.
- Consider the environment: IP22 suits dry indoor spaces. IP43 and IP65 add protection against dust and splashes. IP67 suits wet or exposed installs.
- Count your banks: Multi-output models charge two or three batteries independently.
Running a standard 12V system? Browse the dedicated 12V battery chargers range to narrow your options. When you are ready, choose a lithium-compatible Victron or Enerdrive charger sized to your battery bank, and order today to give your LiFePO4 batteries a safe, accurate charge every time you plug in.







Pre-Wired Boards
4x4/Canopy Power Systems
Solar Kits
Inverter Kits
Charger Kits
Battery Kits
Monitoring Kits









































