Sunman eArc 2x 215W Flexible Solar Panel & Victron SmartSolar MPPT 100/30 Kit
Sunman 2x 215W Solar Panel + Vented Gap Kits + Victron SmartSolar MPPT 100/30 Charge Controller
- 2 x Sunman eArc 215W Flexible Monocrystalline Solar Panel
- 2 x 215W Vented Gap Kits
- Victron SmartSolar 100/30 Bluetooth Charge Controller
Optionally Add Wiring Kit:
- 5x MC4s
- 1x 'h' Branch MC4
- 7m 4mm2 PV1-F Solar Cable
- 1m 8 B&S Twin Cable
- 1x 40A Resettable Circuit Breaker
- 2x M6 16mm Lugs
- 2x M8 16mm Lugs
- 1m 9-3 Black Heatshrink
- 1x Noark Solar Circuit Breaker and 2 DIN Enclosure
Sunman eArc 215W Flexible Monocrystalline Solar Panel
eArc (pronounced e-Ark) by SunMan are the only lightweight solar panels approved for grid connect on buildings which means they have passed the same testing criteria as traditional solar panels.
Tougher, lighter, thinner and more durable
Cutting edge technology - glass fibre-reinforced composite polymers similar to aircraft windows
Light - 100W frameless is 1.9kg
Thin - 2mm
Tough - Hail tested with ice stones of 35mm diameter and 200g mass at 39.5m per sec
Strong - rated 2400 pascals for wind and 2400 pascals for load
Durable - 10 year product warranty for building and 5 years for mobile application
Output - Efficient monocrystalline cells, 25 year performance guarantee
The only range of lightweight solar panel with Clean Energy Council (CEC) Accreditation
Development of the new waterproof composite polymers and panel structure was accelerated by funding of $3.3M from the Australian Renewable Energy Agency (ARENA) to achieve the same durability as conventional solar panels.
eArche panels have been installed on the world’s first solar powered train in Byron Bay and 812 (235kW) panels have been installed onto the Sydney Maritime Museum’s Heritage Building which could not support heavy glass framed solar panels. To date more than 1MW of eArche capacity has been installed in Australia
eArche has obtained a series of other certifications for reliability, including:
A robust, lightweight, flexible solar panel that is perfect for caravans, motorhomes, boats, golf carts, trains, buses and other applications.
|Maximum Power (Pmax)
|Maximum Power Voltage (Vmp)
|Maximum Power Current (Imp)
|Open-circuit Voltage (Voc)
|Short-circuit Current (Isc)
|Operating Temperature (°C)
|-40 °C to 85 °C
|Maximum System Voltage
|1000 V DC (IEC)
|Maximum Series Fuse Rating
|IP 68 rated (each j-box has one by-pass diode)
|Photovoltaic technology cable 4.0 mm2, (+)150 / (-)450 mm
Vented Gap Kits
The Vented Gap Kit (VGK) allows for air-flow underneath the panel from any direction. The kit lifts the panel approx 15mm.
Victron SmartSolar 100/30 Bluetooth Solar Charge Controller
Bluetooth Smart built-in
The wireless solution to set-up, monitor, update and synchronise SmartSolar Charge Controllers
For a wired data connection to a Color Control GX, other GX products, PC or other devices
Ultrafast Maximum Power Point Tracking (MPPT)
Especially in case of a clouded sky, when light intensity is changing continuously, an ultra-fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers
Advanced Maximum Power Point Detection in case of partial shading conditions
If partial shading occurs, two or more maximum power points may be present on the power-voltage curve. Conventional MPPTs tend to lock to a local MPP, which may not be the optimum MPP. The innovative BlueSolar algorithm will always maximize energy harvest by locking to the optimum MPP.
Outstanding conversion efficiency
No cooling fan. Maximum efficiency exceeds 98%. The full output current up to 40°C (104°F).
Flexible charge algorithm
Fully programmable charge algorithm (see the software page on our website), and eight pre-programmed algorithms, selectable with a rotary switch (see manual for details).
Extensive electronic protection
Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection.
Internal temperature sensor
Compensates absorption and float charge voltage for temperature.
Optional external battery voltage and temperature sensing via Bluetooth
A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers.
These kits are perfect for upgrading a pop-top caravan like a Jayco Expanda to be off-grid.
(Loom-2x215F-100-30)Need help choosing a solar panel? Click this link to check our solar panel selector table!
Sunman eArc - 5 year warranty - please read full warranty statement for details
Victron - 5 year warranty - please read full warranty statement for details
Wiring kit and accessories - 1 year warranty