CZone Signal Interface SI with Seals & Connector

Guaranteed Safe and Secure Checkout

10+ Years Experience
Solar Specialists

Fast Shipping
From Victoria

Free Returns*
Within 30 days

The Signal Interface (SI) connects the CZone system to your external sensors, alarms and switching devices. The SI allows intelligent, automated operation of circuits depending on the state of the input.

Accepts inputs from traditional switch types being used to control outputs
Accepts inputs from switches to trigger alarm i.e. high water float switch
Accepts inputs from industry standard tank senders (0-5V, 10-180 Ohm, 240-33 Ohm)
Accepts inputs from general voltaic or resistive signals can be used for controlling outputs or to display a physical position i.e. show a hatch is partially open
LED status indicators for each input
Dimensions, WxHxD: 6-3/32"x3-29/32"x1-5/8" 156x100x42 mm
IPX5 water ingress protection
Resistive input range 0-1000 Ohms
Outputs standard NMEA2000 sentences

(CZ-80-911-0013-00)

6 inputs
• Inputs from traditional switch types being used to control outputs (Negative, Open circuit, 0-35V DC)
• Inputs from switches to trigger alarm i.e. high water fl oat switch (Negative, Open circuit, 0-35V DC)
• LED status indicators for each input
• Tank level senders (compatible with industry standard sender outputs, 0-5V, 10-180 Ohm, 240-33Ohm)
• General voltaic or resistive signals can be used for controlling outputs or to display a physical position ie show a hatch is partially open

Inputs
• Network, NMEA 2000

Dimensions: H 100mm (3”29/32) x W156mm (6”3/32) x D 42mm (1”5/8)
Weight: 281g

EMC ratings:
• IEC EN 60945
• IEC EN 61000
• FCC Class B
• ISO 7637 - 1 (12V Passenger cars and light commercial vehicles with nominal 12 V supply voltage
- Electrical transient conduction along supply lines only)
• ISO 7637 - 2 (24V Commercial vehicles with nominal 24 V supply voltage - Electrical transient conduction along supply lines only)
• IEC Standards for indirect lighting strikes