Blue Smart IP22 Charger 12/30(3) 230V AU/NZ Victron

Set/monitor volts & amps via Bluetooth

RRP $379.50
SAVE $94.50 (25%)
In Stock

Calculate Shipping

Enter qty and post code to calculate:

Australia Post Express Satchel - Large - $25.00
Express satchel: Australia Wide via Australia Post including to PO Boxes & Post Offices

The Blue Smart IP22 Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.

The battery is charged, smartly... to perfect condition:  The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance... and a longer life.

Bluetooth Smart:   The Blue Smart IP22 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available. 

High efficiency With up to 94% efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard.

Adaptive 6-stage charge algorithm: test - bulk – absorption - recondition – float – storage The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used.

Storage Mode: less maintenance and aging when the battery is not in use The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2V/cell (13,2V for a 12V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, a major cause of early battery failure.

Also charges Li-ion (LiFePO₄) batteries LiFePO₄ batteries are charged with a simple bulk – absorption – float algorithm

NIGHT and LOW setting:  When in NIGHT or LOW mode, the output current is reduced to max. 50% of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually. 

Protected against overheating Output current will reduce as temperature increases up to 50°C, but the Blue Smart Charger will not fail.

Eleven LEDs for status indication Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to set: NORMAL (14,4V) / HIGH (14,7V) / RECONDITION / LI-ION.




SKU VIC-BPC123044012

Product Function and Performance

Product Weight and Dimensions

Weight 0.9kg

Shipping Weight and Dimensions

Shipping Weight 1.5500kg
Shipping Width 0.165m
Shipping Height 0.070m
Shipping Length 0.260m
Shipping Cubic 0.003003000m3

5 years

Others Also Bought

More From This Category

Blue Smart IP65 Charger 12/4(1) 230V AU/NZ Victron
20% OFF RRP $132.00
Blue Smart IP65 Charger 12/5(1) 230V AU/NZ Victron
21% OFF RRP $138.60
Blue Smart IP65 Charger 12/7(1) 230V AU/NZ Victron
20% OFF RRP $192.50
Blue Smart IP65 Charger 24/5(1) 230V AU/NZ
20% OFF RRP $192.50
Blue Smart IP65 Charger 24/8(1) 230V AU/NZ
20% OFF RRP $262.90