Victron 12/24V 15A SmartSolar MPPT 100/15 Bluetooth Solar Charge Controller
Victron 12/24V 15A SmartSolar MPPT 100/15 Bluetooth Solar Charge Controller
Bluetooth built-in for remote monitoring and control
Highlights:MPPT Technology: Ultra-fast Maximum Power Point Tracking for improved energy harvest,Bluetooth Smart: Integrated Bluetooth for wireless monitoring via VictronConnect app,IP43 Rating: Protected against water spray less than 60 degrees from vertical,Battery Terminals: Screw terminals for secure 12V or 24V battery connection,PV Terminals: Input terminals for solar panel arrays up to 100V open circuit,Load Output: 15A load output with automatic low voltage disconnect.
Key features: 12V and 24V battery auto-select, 15A rated charge and load current, High peak efficiency of 98%, Internal 15A blade fuse protection, Large aluminium heat sink for passive cooling, 6mm² power terminal capacity.

Front-on view showing the 15A blade fuse and terminal connections for battery, solar PV, and DC loads with a clear look at the aluminium cooling fins.
Integrated Bluetooth allows real-time monitoring of solar voltage, current, battery charging state, and load output directly on your smartphone.


DESCRIPTION
Victron 12/24V 15A SmartSolar MPPT 100/15 Bluetooth Solar Charge Controller
Maximize your solar system's efficiency with the Victron 12/24V 15A SmartSolar MPPT 100/15 Bluetooth Solar Charge Controller. This controller is engineered to bring you unparalleled ease of use and performance, ensuring you get the most out of your solar installation.
Bluetooth Smart: Effortless Solar Management
With built-in Bluetooth Smart technology, managing your SmartSolar Charge Controllers has never been easier. This feature allows for wireless setup, monitoring, updates, and synchronization, providing a seamless experience in managing your solar energy.
VE.Direct: Reliable Wired Data Connection
The VE.Direct feature offers a robust wired data connection to Cerbo GX and other GX devices, PCs, and more. This connectivity ensures efficient data sharing and device integration, enhancing your system's performance and reliability.
Ultra-fast MPPT: Enhanced Solar Energy Harvest
Our ultra-fast Maximum Power Point Tracking (MPPT) technology is designed to optimize your energy harvest, boosting it by up to 30% compared to PWM charge controllers, and by up to 10% more than slower MPPT controllers. It's perfect for handling cloudy skies and changing light conditions, ensuring maximum efficiency.
Load Output: Intelligent Battery Protection
To prevent battery over-discharge, all loads can be connected to the load output. This feature intelligently disconnects the load when the battery voltage drops to a predetermined level, ensuring your battery's longevity and health.
Battery Life: Advanced Battery Management
The Battery Life algorithm enhances the way your solar charge controller manages the battery, efficiently charging it to avoid harmful cycles between partially charged and fully discharged states. This strategy helps achieve a near-full recharge approximately once every week, extending your battery's lifespan.
Programmable Battery Charge Algorithm: Tailor-Made Charging
Visit our software section to learn how to customize the battery charge algorithm according to your needs. This flexibility allows for a personalized charging process, optimizing your system's performance.
Day/Night Timing and Light Dimming
Discover additional functionalities like day/night timing and light dimming by exploring the software section on our website. These features offer more control over your solar system, adapting it to your specific requirements.
Internal Temperature Sensor: Accurate Charging Adjustments
The internal temperature sensor provides precise charge compensation by adjusting the absorption and float charge voltages according to temperature fluctuations, ensuring efficient and accurate charging under varying environmental conditions.
Optional External Battery Voltage and Temperature Sensing
Enhance your system's monitoring capabilities by using a Smart Battery Sense or a BMV-712 Smart Battery Monitor. These optional devices communicate vital battery voltage and temperature information to your SmartSolar Charge Controllers via Bluetooth, further optimizing your system's efficiency.
Advanced Charging Features
Adaptive 3-Stage Battery Charging
The sophisticated 3-stage charging process includes Bulk, Absorption, and Float stages, designed for efficient and thorough battery charging. This adaptive approach ensures optimal recharging, based on the battery's discharge level, and maintains the batteries at a healthy voltage, preventing overcharging during inactivity.
- Bulk Stage: Rapid charging with maximum current until reaching the set absorption voltage.
- Absorption Stage: Switches to constant voltage, reducing current to prevent overcharging.
- Float Stage: Keeps batteries at a safe voltage, extending their life and ensuring they remain charged.
Flexible Charge Algorithm and Equalization Charging
Through the VictronConnect App, you can choose from 8 pre-set charge algorithms or create a fully programmable charge algorithm to suit your specific needs. Additionally, equalization charging for certain lead-acid batteries can be activated to ensure all cells are balanced, promoting battery health and longevity.
Upgrade to the Victron 12/24V 15A SmartSolar MPPT 100/15 Bluetooth Solar Charge Controller for a smart, efficient, and customizable solar charging experience, ensuring your solar system performs at its best.
SPECIFICATIONS
Specifications
| Solar Charge Controller | MPPT 100/15 |
|---|---|
| Battery voltage (auto select) | 12/24 V |
| Rated charge current | 15 A |
| Nominal PV power, 12 V | 220 W |
| Nominal PV power, 24 V | 440 W |
| Nominal PV power, 48 V | n.a. |
| Max. PV short circuit current | 15 A |
| Automatic load disconnect | Yes |
| Max. PV open circuit voltage | 100 V |
| Peak efficiency | 98% |
| Self-consumption – load on | 12 V: 19 mA 24 V: 16 mA |
| Self-consumption – load off | 12 V: 10 mA 24 V: 8 mA |
| Charge voltage 'absorption' | 14.4 V / 28.8 V (adj.) |
| Charge voltage 'float' | 13.8 V / 27.6 V (adj.) |
| Charge algorithm | multi-stage adaptive |
| Temperature compensation | -16 mV / °C resp. -32 mV / °C |
| Max. continuous load current | 15 A |
| Low voltage load disconnect | 11.1 V / 22.2 V / 44.4 V or 11.8 V / 23.6 V / 47.2 V or Battery Life algorithm |
| Low voltage load reconnect | 13.1 V / 26.2 V / 52.4 V or 14 V / 28 V / 56 V or Battery Life algorithm |
| Protection | Output short circuit / Over temperature |
| Operating temperature | -30 to +60 °C (full rated output up to 40 °C) |
| Humidity | 95%, non-condensing |
| Data communication port | VE.Direct |
| Enclosure | |
| Colour | Blue (RAL 5012) |
| Power terminals | 6 mm² / AWG10 |
| Protection category | IP43 (electronic components), IP22 (connection area) |
| Weight | 0.6 kg |
| Dimensions (h x w x d) | 100 x 113 x 50 mm |
| Standards | |
| Safety | EN/IEC 62109-1, UL 1741, CSA C22.2 |
| Stored Trends | |
| Data stored | Battery voltage, current and temperature, as well as load output current, PV voltage and PV current. |
| Number of days trends data is stored | 46 |
Note:
1a) If more PV power is connected, the controller will limit input power. 1b) The PV voltage must exceed Vbat + 5 V for the controller to start. Thereafter, the minimum PV voltage is Vbat + 1 V.
2. A PV array with a higher short circuit current may damage the controller.
| SKU: | VIC-SCC110015060R |
| Barcode: | 8719076040811 |
| Model #: | SCC110015060R |
| MPN: | SCC110015060R |
WARRANTY
Victron Energy Limited Warranty Policy
Direct Customers
Victron Energy provides the following warranty to any direct customer (OEM, distributor or dealer) in relation to any products that Victron Energy has directly sold to the direct customer. This warranty is not an end-user warranty between Victron Energy and an end-user, and end-users shall not have any rights or remedies under this limited warranty towards Victron Energy directly. The direct customer shall, in turn, ensure that the end-user is provided with a warranty identical to this warranty, subject to applicable local mandatory law.
End-Users
Victron Energy may also provide a warranty directly to end-users, in which case the below warranty conditions equally apply to such warranty. In that case, end-users shall claim their warranty at their place of purchase or through the original direct customer of Victron, which can be found through the support section on Victron’s website https://www.victronenergy.com/support. Hence, the direct customer shall on behalf of Victron Energy deal with any warranty claims made under any warranty that Victron Energy may provide directly to end-users. This support section on Victron’s website https://www.victronenergy.com/support will provide further guidance on the procedure for end-users to make a claim under this limited warranty.
If the end-user is a consumer – a natural person who is acting for purposes which are outside that person's trade, business, craft or profession – the following applies. The rights and remedies granted to the consumer under this limited warranty are without prejudice to the consumer’s statutory rights. Furthermore, the consumer is entitled by law to remedies from the seller free of charge in the event of a lack of conformity of the goods (such as repair, replacement, price reduction or rescission), which remedies are not affected by this limited warranty.
Warranty
Victron Energy warrants its products to be free from defects in workmanship and materials for a period of 5 years from the date of purchase by the original end-user, with a maximum of 66 months from the Victron Energy invoice date. Exceptions on this are: lead-acid batteries: 2 years from date of purchase by the original end-user, with a maximum of 30 months from the Victron Energy invoice date, Lithium batteries: 3 years from date of purchase by the original end-user, with a maximum of 42 months from the Victron Energy invoice date. In addition to this, proof of correct battery usage is required when making a battery warranty claim.
For a 10% surcharge on the current net price for products that came with a 5-year warranty, an additional 5 years of warranty can be purchased by Victron’s direct customers, bringing the total warranty to 10 years. Warranty extensions need to be applied for ultimately one year before the expiration of the original term. Victron may ask proof that the product was still functional at the time of purchase of the extended warranty.
During the warranty period, Victron Energy will, at its discretion, repair, replace or (partly) credit the defective product free of charge. The warranty does not include performing or reimbursing de‐installation, transportation, and re‐installation.
This warranty will be considered void if the unit has suffered any physical damage or alteration, either internally or externally, and does not cover damages arising from improper use like:
- Reversed battery polarity.
- Inadequate connection.
- Mechanical shock or deformation.
- Contact with liquid or oxidation by condensation.
- Use in an inappropriate environment (dust, corrosive vapour, humidity, high temperature, biological infestation, etc.).
- Breakage or damage due to lightning.
- Connection terminals and screws destroyed or other damages, like overheating, due to insufficient tightening.
- For any electronic breakage except due to lightning (reverse polarity, over‐voltage due to external cause), the state of the internal control diode and/or the input/output X and Y capacitors determine the warranty.
This warranty will not apply where the product has been misused, neglected, improperly installed, or repaired by anyone other than Victron Energy or one of its authorized Repair Centres. In order to qualify for the warranty, the product must not be disassembled or modified.
This warranty and our warranty obligations thereunder (repair, replacement or credit) are the direct customer’s and, if applicable, the end-user’s sole rights and remedies and our sole obligations with respect to any defective and/or non-conforming product or breach of warranty and is subject to and without prejudice to the limitations of liability in this warranty.
Victron Energy shall not be liable for damages, whether direct, incidental, special, or consequential, even caused by negligence or fault.
As a product requires service, it must be brought back to the place of purchase. In case no contact can be made with the merchant, or if he is either unable or not allowed to provide service, direct contact should be made with Victron Energy through the support section on Victron’s website.
In case Victron Energy replaces a product, it will own the replaced product. Victron Energy owns all parts removed from repaired products. Victron Energy uses new or reconditioned parts made by various manufacturers when performing warranty repairs or building replacement products.
If Victron Energy repairs or replaces a part of a product, its warranty term is not extended: the warranty will apply for the remaining term of the original warranty term. For example, if Victron Energy replaces a product with a 5-year warranty after 3 years, the warranty of this product will apply for another 2 years, with a minimum of 6 months.
All remedies and the measure for damages are limited to the above. Victron Energy shall in no event be liable for consequential, incidental, contingent or special damages, even if having been advised of the probability of such damages.
The foregoing limited warranty provided by Victron Energy is in lieu of any other warranties, express or implied arising by law, course of dealing, course of performance, usage of trade or otherwise, of any kind whatsoever including, without limitation, warranties of merchantability or fitness for a particular purpose, with respect to any product. The above is without prejudice to the arrangement for consumers detailed above.
Life Support Policy
As a general policy, Victron Energy does not recommend the use of any of its products in life support applications where failure or malfunction of Victron Energy's product can be reasonably expected to cause the failure of the life support device or to significantly affect its safety or effectiveness. Victron Energy does not recommend the use of any of its products in direct patient care. Victron Energy will not knowingly sell its products for use in such applications unless it receives in writing assurances satisfactory to Victron Energy that the risks of injury or damage have been minimized, the customer assumes all such risks, and the liability of Victron Energy is adequately protected under the circumstances.
Warranty on repairs for products outside their warranty period
The warranty period on products that are outside their warranty period and have been repaired by Victron Energy or one of the Victron Energy Repair centres is six (6) months from delivery. The same applies to spare parts and circuit boards that have been supplied or repaired by Victron Energy.
Transport
It is the responsibility of the sender to sufficiently package these products. The transport must be organized in a way to avoid any damage, especially when a single unit or heavy unit is sent.
Severability
If a part of the terms and conditions of this warranty is held invalid, void or unenforceable due to any particular national or international legislation, it shall not affect other parts of the terms and conditions of this warranty.
Applicable law
This warranty is exclusively governed by the laws of the Netherlands, to the exclusion of the UN Convention on Contracts for the International Sale of Goods.
Contact details
Victron Energy B.V. | De Paal 35, 1351 JG Almere, The Netherlands | https://www.victronenergy.com/support




















































