Votronic Remote LCD Display (Solar Computer S) for Votronic MPP controllersIncludes 5m cable
Provides precise reading of solar charging current, battery voltage, power and the Amp-hrs and the Watt-hrs. Optional casing/housing available. Made in Germany.
How much energy does my solar system really supply? Are the solar modules shaded or dirty or is something wrong?
The VOTRONIC solar power measurement unit gives the answer to these questions.
When being plugged into the VOTRONIC solar charging controllers of series SR and MPP, the desired information is given comprehensively and immediately. The solar display can be connected to the controller at any time, also subsequently, since the VOTRONIC solar charging controller is ready for connection to produce the required signals. Thus, the connection is extremely simple.
The clear arrangement of the measuring values on the display and the easy operation with pushing the button allow improved control and use of the solar system. The instantaneous solar power is also displayed as bar graph allowing the control at a glance.
The display is equipped with a background illumination (switchable). So, the legibility of the values is very well, even at a great distance and with all lighting conditions. Matching to the VOTRONIC modular system, the digital display is executed as panel version. Appearance and mechanic (identical height 85 mm) are adapted to the other display modules.
The small dimensions of the front panel and the particularly small mounting depth of only 18 mm allow an installation at almost any location. If flush mounting of the LCD display is not desired, a corresponding casing is available as accessory.
The unit is ready for connection to the solar controllers. A connection cable of 5m length is included with the unit.
A microprocessor control measures, calculates and displays the following values:
- Instantaneous solar power 0 - 999 W (Watt)
- Instantaneous solar current 0 - 60,0 A (Ampere)
Any geographic or atmospheric influences will be displayed immediately and unmistakable.
The same applies to the exposure of the sun, partial shading or soiling of the solar modules.
- Instantaneous voltage of the solar battery 7 - 32,0 V (Volt)
Allows conclusions concerning the battery state; flashing warning signal in case of undervoltage and overvoltage of the battery.
- Charged solar capacity 0 - 9999 Ah (Ampere-hours)
- Charged solar energy 0 - 9999 kWh (Kilowatt-hours)
The power (Wh and kWh) being generated by the solar modules and the capacity (Ah) being charged into the battery will be measured, added up and displayed, even over a longer period (days, weeks). If it is required for purposes of statistics, each of the display units can be reset to "zero" at any time.
Nominal Voltage (DC) in [V]
|12 and 24|
|Current Consumption max. in [mA]||3 - 30 (depending on illumination)|
|Display||LC Display with specific segments|
|Display-Functions||W, A, V, Ah, Wh|
|Measuring Range [Wp]||20 - 990|
|Dimensions (WxDxH) in [mm]||80 x 85 x 25|
|Assembly Dimensions (WxDxT) in [mm]||66 x 72 x 22|
|Weight in [g]||55|
|Mark of conformity||CE, E-Test (EMV/Automotive Regulations)|
|Ambient Conditions, Humidity of Air: max. 95 % RH, No Condensation|
|Delivery Scope: Connection Cable 5m, Fastening Screws, Operating Manual, Drilling Jig|
We are liable for material defects of all our products within 36 months from the purchase date against representation of the sales slip or of the invoice, proper handling, intended use and consideration of the installation and operating manual provided. If the buyer or third execute modification and repair tasks to the product (external intervention) or will the electronic or the entire product damaged by moisture, any claims for defects for these tasks and the results being involved will be void. Claims will also be void for any service being performed by third, which has not been ordered by us in writing. Service is exclusively allowed to be performed by Votronic GmbH & Co. KG Lauterbach.
Others Also Bought
More From This Category