Victron Digital Multi Control 200/200A / MultiPlus Remote Panel
Victron Digital Multi Control 200/200A / MultiPlus Remote Panel
Dual AC Source Current Limiting up to 200 A with Status Display
Highlights:Digital Display: 7-segment LED readout for clear visibility of current limit settings,Current Limit Dial: Rotary knob for precise adjustment of the shore power current limit,Mode Switch: Three-way toggle for On, Off, or Charger Only operation,Charging LEDs: Status indicators for mains power, bulk, absorption, and float charging stages,Inverter LEDs: Diagnostic indicators for inverter status, overload, low battery, and temperature,Mounting Holes: Four corner mounting points for secure flush-mount installation.
Key features: Front panel dimensions: 120mm x 65mm, Panel thickness: 3mm faceplate profile, Four 4.2mm diameter corner mounting holes, Pre-drilled cutouts for LEDs, switch, and rotary control, Internal vertical spacing: 44mm between mounting centres. 
DESCRIPTION
Precision Power Management for Victron MultiPlus and Quattro Systems
Remote Control Panel with Dual AC Source Current Limiting
The Victron Digital Multi Control 200/200A provides a dedicated remote interface for managing PowerControl and PowerAssist functions on compatible Victron inverter/chargers. Designed for installations where the main unit is mounted out of reach, this panel puts critical controls at your fingertips, allowing you to set shore and generator current limits without accessing the inverter directly.
Engineered for MultiPlus, MultiPlus-II, Quattro, and EasySolar systems, this panel supports stand-alone, parallel, and multi-phase configurations. It enables precise adjustment of AC input current for two independent sources, typically a shore power connection and a generator, with a setting range up to 200 A. This dual-source capability is essential for mobile and off-grid applications where available power varies between locations.
Intuitive Control and Clear Status Feedback
The front panel features a 7-segment digital display that shows the active AC input current limit, along with source identification or VE.Bus error codes when applicable. Eight status LEDs replicate the inverter/charger's own indicators, covering mains presence, bulk, absorption, float, inverter operation, overload, low battery, and temperature warnings. LED brightness automatically dims at night, reducing distraction in sleeping quarters without compromising daytime visibility.
A three-position toggle switch allows you to select On, Off, or Charger Only mode, providing straightforward control over system operation. The rotary current limit dial offers smooth, precise adjustment, making it simple to match the available supply capacity at each site.
Seamless Integration and Reliable Connectivity
Connection to the inverter/charger is via a standard RJ45 UTP cable (sold separately), supporting cable runs from 30 cm up to 30 m. This flexibility allows the panel to be mounted in a convenient location such as a main switchboard, cabin entry, or navigation station. The panel also includes wiring terminals for generator start/stop control, accepting conductors between 0.25 mm² and 1.0 mm².
With a compact faceplate measuring 120 mm x 65 mm, the Digital Multi Control fits neatly into standard switch panels. Four corner mounting holes enable secure flush-mount installation, and the low-profile design integrates cleanly into any interior.
Key Features
- Dual AC source current limiting for shore power and generator inputs, adjustable up to 200 A
- Compatible with MultiPlus, MultiPlus-II, Quattro, Quattro-II, EasySolar, and legacy VE.Bus models
- 7-segment display for current limit readout and system diagnostics
- Eight status LEDs with automatic night-time dimming
- Three-position mode switch: On, Off, Charger Only
- RJ45 connectivity supports cable lengths from 30 cm to 30 m
- Generator start/stop wiring terminals for automated control
- Compact 120 mm x 65 mm faceplate for flush-mount installation
Applications
This remote panel is ideal for caravans, motorhomes, marine vessels, and off-grid cabins where the inverter/charger is installed in a locker, engine room, or utility space. It solves the problem of inaccessible controls by bringing essential functions to a user-friendly location. By allowing precise current limiting, it helps prevent nuisance tripping of shore breakers and protects the AC supply from overload, reducing the risk of power interruptions.
Unlike generic remote switches, the Digital Multi Control communicates directly with the VE.Bus network, ensuring accurate synchronisation with the inverter/charger's internal logic. This integration supports advanced features like PowerAssist, which supplements limited shore power with battery energy during peak demand.
Take Command of Your Energy System
Upgrade your Victron installation with the Digital Multi Control 200/200A and gain convenient, reliable control over your AC power sources. Order today to simplify power management on your next adventure.
SPECIFICATIONS
Specifications
| Current Limit Control | PowerControl and PowerAssist current limit setting |
|---|---|
| AC Source Support | Two AC sources: a generator and shore side current for example |
| AC Input Current Setting Range | Up to 200 A |
| Compatible Inverter/Charger Models | MultiCompact; MultiPlus, MultiPlus-II and MultiPlus-II GX; Quattro and Quattro-II; EasySolar and EasySolar-II GX; Legacy (pre-VE.Bus) Multi, MultiCompact, MultiPlus and Quattro (2008 and earlier) |
| System Configurations | Stand-alone, parallel, and 2- or 3-phase configurations |
| Display | 7-segment display |
| Display Indications | AC input current and, if applicable, AC input source or VE.Bus error codes |
| LEDs | Eight LEDs replicate the inverter/charger LEDs |
| LED Brightness | Automatically reduced during night time |
| Power Mode Switch | On, off or charger-only mode |
| Connection | RJ45 UTP cable |
| RJ45 UTP Cable Length | 30 cm to 30 m |
| Generator Support Wiring | Two wires with a thickness between 0.25 and 1.0 mm² |
| Panel Width | 120.00 mm |
| Panel Height | 65.00 mm |
| SKU: | Vic-REC020005010 |
| Barcode: | 8719076024354 |
| Model #: | REC020005010 |
| MPN: | REC020005010 |
WARRANTY
Victron Energy Limited Warranty Policy
Direct Customers
Victron Energy provides the following warranty to any direct customer (OEM, distributor or dealer) in relation to any products that Victron Energy has directly sold to the direct customer. This warranty is not an end-user warranty between Victron Energy and an end-user, and end-users shall not have any rights or remedies under this limited warranty towards Victron Energy directly. The direct customer shall, in turn, ensure that the end-user is provided with a warranty identical to this warranty, subject to applicable local mandatory law.
End-Users
Victron Energy may also provide a warranty directly to end-users, in which case the below warranty conditions equally apply to such warranty. In that case, end-users shall claim their warranty at their place of purchase or through the original direct customer of Victron, which can be found through the support section on Victron’s website https://www.victronenergy.com/support. Hence, the direct customer shall on behalf of Victron Energy deal with any warranty claims made under any warranty that Victron Energy may provide directly to end-users. This support section on Victron’s website https://www.victronenergy.com/support will provide further guidance on the procedure for end-users to make a claim under this limited warranty.
If the end-user is a consumer – a natural person who is acting for purposes which are outside that person's trade, business, craft or profession – the following applies. The rights and remedies granted to the consumer under this limited warranty are without prejudice to the consumer’s statutory rights. Furthermore, the consumer is entitled by law to remedies from the seller free of charge in the event of a lack of conformity of the goods (such as repair, replacement, price reduction or rescission), which remedies are not affected by this limited warranty.
Warranty
Victron Energy warrants its products to be free from defects in workmanship and materials for a period of 5 years from the date of purchase by the original end-user, with a maximum of 66 months from the Victron Energy invoice date. Exceptions on this are: lead-acid batteries: 2 years from date of purchase by the original end-user, with a maximum of 30 months from the Victron Energy invoice date, Lithium batteries: 3 years from date of purchase by the original end-user, with a maximum of 42 months from the Victron Energy invoice date. In addition to this, proof of correct battery usage is required when making a battery warranty claim.
For a 10% surcharge on the current net price for products that came with a 5-year warranty, an additional 5 years of warranty can be purchased by Victron’s direct customers, bringing the total warranty to 10 years. Warranty extensions need to be applied for ultimately one year before the expiration of the original term. Victron may ask proof that the product was still functional at the time of purchase of the extended warranty.
During the warranty period, Victron Energy will, at its discretion, repair, replace or (partly) credit the defective product free of charge. The warranty does not include performing or reimbursing de‐installation, transportation, and re‐installation.
This warranty will be considered void if the unit has suffered any physical damage or alteration, either internally or externally, and does not cover damages arising from improper use like:
- Reversed battery polarity.
- Inadequate connection.
- Mechanical shock or deformation.
- Contact with liquid or oxidation by condensation.
- Use in an inappropriate environment (dust, corrosive vapour, humidity, high temperature, biological infestation, etc.).
- Breakage or damage due to lightning.
- Connection terminals and screws destroyed or other damages, like overheating, due to insufficient tightening.
- For any electronic breakage except due to lightning (reverse polarity, over‐voltage due to external cause), the state of the internal control diode and/or the input/output X and Y capacitors determine the warranty.
This warranty will not apply where the product has been misused, neglected, improperly installed, or repaired by anyone other than Victron Energy or one of its authorized Repair Centres. In order to qualify for the warranty, the product must not be disassembled or modified.
This warranty and our warranty obligations thereunder (repair, replacement or credit) are the direct customer’s and, if applicable, the end-user’s sole rights and remedies and our sole obligations with respect to any defective and/or non-conforming product or breach of warranty and is subject to and without prejudice to the limitations of liability in this warranty.
Victron Energy shall not be liable for damages, whether direct, incidental, special, or consequential, even caused by negligence or fault.
As a product requires service, it must be brought back to the place of purchase. In case no contact can be made with the merchant, or if he is either unable or not allowed to provide service, direct contact should be made with Victron Energy through the support section on Victron’s website.
In case Victron Energy replaces a product, it will own the replaced product. Victron Energy owns all parts removed from repaired products. Victron Energy uses new or reconditioned parts made by various manufacturers when performing warranty repairs or building replacement products.
If Victron Energy repairs or replaces a part of a product, its warranty term is not extended: the warranty will apply for the remaining term of the original warranty term. For example, if Victron Energy replaces a product with a 5-year warranty after 3 years, the warranty of this product will apply for another 2 years, with a minimum of 6 months.
All remedies and the measure for damages are limited to the above. Victron Energy shall in no event be liable for consequential, incidental, contingent or special damages, even if having been advised of the probability of such damages.
The foregoing limited warranty provided by Victron Energy is in lieu of any other warranties, express or implied arising by law, course of dealing, course of performance, usage of trade or otherwise, of any kind whatsoever including, without limitation, warranties of merchantability or fitness for a particular purpose, with respect to any product. The above is without prejudice to the arrangement for consumers detailed above.
Life Support Policy
As a general policy, Victron Energy does not recommend the use of any of its products in life support applications where failure or malfunction of Victron Energy's product can be reasonably expected to cause the failure of the life support device or to significantly affect its safety or effectiveness. Victron Energy does not recommend the use of any of its products in direct patient care. Victron Energy will not knowingly sell its products for use in such applications unless it receives in writing assurances satisfactory to Victron Energy that the risks of injury or damage have been minimized, the customer assumes all such risks, and the liability of Victron Energy is adequately protected under the circumstances.
Warranty on repairs for products outside their warranty period
The warranty period on products that are outside their warranty period and have been repaired by Victron Energy or one of the Victron Energy Repair centres is six (6) months from delivery. The same applies to spare parts and circuit boards that have been supplied or repaired by Victron Energy.
Transport
It is the responsibility of the sender to sufficiently package these products. The transport must be organized in a way to avoid any damage, especially when a single unit or heavy unit is sent.
Severability
If a part of the terms and conditions of this warranty is held invalid, void or unenforceable due to any particular national or international legislation, it shall not affect other parts of the terms and conditions of this warranty.
Applicable law
This warranty is exclusively governed by the laws of the Netherlands, to the exclusion of the UN Convention on Contracts for the International Sale of Goods.
Contact details
Victron Energy B.V. | De Paal 35, 1351 JG Almere, The Netherlands | https://www.victronenergy.com/support















































