Roll of Acrylic High Bond Double-sided Foam Tape 2.3mmH x 12mmW x 16.5m

High-Performance 2.3 mm Acrylic Foam High Bond Tape for Demanding Bonding Applications

Engineered for Strength, Conformability, and Long-Term Reliability

This 2.3 mm acrylic foam high bond tape delivers a strong, viscoelastic bond for applications where a thicker, more conformable adhesive layer is preferred. With a thickness of 2.3 mm and a width of 12 mm, the 16.5-metre roll provides ample material for continuous runs or multiple installations. The acrylic foam carrier helps distribute stress across the bonded area and provides a clean alternative to visible fixings in suitable applications.

Unlike many conventional double-sided tapes, this very high bond tape is designed for demanding bonding applications where strength, conformability, and temperature resistance are important. Its 2.3 mm profile provides a practical balance between bond-line thickness and surface contact, making it suitable for automotive trim, nameplates, electronics assembly, signage, and selected flexible solar panel applications.

Key Features

• Balanced Bonding Profile: The 2.3 mm thickness provides added conformability while maintaining a practical bond-line height.
• Strong Adhesion: 180° peel adhesion of ≥4500 gf/25 mm on stainless steel provides reliable bonding performance on suitable prepared surfaces.
• High Tensile Strength: Tensile strength of ≥5,500 gf/cm², tested using an aluminium T-block method to ASTM D-897.
• Dynamic Shear Performance: Dynamic shear strength reaches ≥3,000 gf/cm² after 20 minutes and ≥5300 gf/cm² after 24 hours at room temperature.
• Temperature Resistance: Rated for short-term exposure up to 160 °C and long-term exposure up to 120 °C under the stated test conditions.
• Clean Aesthetic: Helps reduce the need for visible screws, rivets, or brackets in suitable applications where testing confirms the tape is appropriate.

Applications Where This Tape Excels

This double-sided acrylic foam tape is suited to applications where strong adhesion and moderate foam thickness are required. Common uses include:

• Automotive Trim and Accessories: Attach weather strips, side strips, nameplates, sun visors, cushioning protectors, and roof rubber components.
• Electronics Assembly: Fix LCD components, laptop parts, mobile phone parts, PDA components, backlight frames, and shading elements.
• Nameplates and Signs: Mount nameplates, labels, badges, and signs to suitable prepared surfaces.
• Flexible Solar Panel Applications: Suitable for selected flexible solar panel installations.
• General Industrial Use: Suitable for selected radiator, silk-screen, and fabrication applications where acrylic foam bonding tape is required.

Installation Best Practices

For optimal bond strength, apply the tape at temperatures between 0 °C and 35 °C. Surfaces must be clean, dry, and free from dust, grease, wax, polish, silicone, and other contaminants. Clean all surfaces with isopropyl alcohol and allow them to dry before applying the tape. Avoid touching the exposed adhesive surface to maintain full adhesive performance.

Apply firm, even pressure across the entire bond area. Pressure-sensitive adhesive must be applied with sufficient pressure to achieve full contact with the surface. The indicated performance level is reached after a bonding period of 24 hours at 23 °C.

Compatibility Notice

Important: Always confirm compatibility with your specific solar panel, mounting surface, and installation environment before use. Adhesion performance can vary depending on the panel backing material, roof substrate, surface coating, paint condition, texture, cleanliness, age, and exposure to heat, UV, moisture, or chemicals.

Before completing the installation, test the tape on a small area or offcut where possible and check the solar panel manufacturer’s installation requirements. Some flexible solar panels or roof materials may require a specific adhesive system, primer, sealant, or mechanical fixing method. The installer is responsible for ensuring the tape is suitable for the intended panel, substrate, load, and application conditions.

Storage and Shelf Life

Store in a clean, dry, well-ventilated area, preferably between 10 °C and 30 °C. When stored under these conditions, shelf life is a minimum of six months.

Why Choose This 2.3 mm Acrylic Foam Tape?

This 2.3 mm ultra high bond tape provides strong adhesion, a practical bond line, and dependable temperature resistance under the stated test conditions. Its acrylic foam construction makes it suitable for applications where a clean finish, reliable bonding performance, and moderate foam thickness are required.

Whether you are securing automotive trim, mounting signs, assembling electronic components, or completing a solar or RV installation, this 2.3 mm high bond double-sided tape provides a professional-grade bonding solution for suitable, tested applications.

Secure Your Bond Today

Add this 2.3 mm x 12 mm x 16.5 m roll of acrylic high bond foam tape to your toolkit for clean, strong, medium-profile bonding across automotive, solar, signage, electronics, and general industrial applications.