Victron 12V & 24V Orion XS 1400 DC-DC Smart Battery Charger
Victron 12V & 24V Orion XS 1400 DC-DC Smart Battery Charger
Highlights:Status LEDs: Indicates Bulk, Absorption and Float charging stages,QR Code: Quick link to product information and manual,IP65 Rating: Ingress protection rating for dust and water resistance,Power Terminals: High-current screw terminals for input, ground and output,Remote Connector: Terminals for remote on/off switch or bridge,VE.Direct Port: Communication port for wired connection to GX devices or PC.
View of the connection base including high-current screw terminals and integrated aluminium cooling fins for efficient thermal management.
Detailed straight-on view of the DC connection interface, featuring M6 screw terminals, remote switch input and VE.Direct communication port.
Key features: Height: 138.1 mm, Width: 124.4 mm, Depth: 53.0 mm, Mounting holes: 4 x 4.3 mm diameter.
Key features: 1400W continuous output power at 40°C, Wide 9-35V input voltage range, 98.5% maximum efficiency, IP65 ingress protection, Bluetooth Smart and VE.Direct communication built-in.
System schematic showing the Orion XS 1400 DC-DC charger integrated with an alternator, starter battery, auxiliary battery, and smartphone monitoring via Bluetooth. 
DESCRIPTION
Enhance Your Power Experience with the Victron Orion XS 1400 (12/24V) DC-DC Battery Charger
Unlock the full potential of your power systems with the Orion XS 1400, your reliable solution for advanced current control and efficient power management. Engineered from the ground up to redefine adaptive DC-DC charging, this robust and versatile DC/DC charger is essential for dual battery systems in vehicles with smart alternators, boats, and RVs, ensuring your energy setup is optimized and your batteries are precisely and fully charged.
Stay in charge with configurable input and output currents, and rest assured that your Orion XS 1400 will run at full capacity up to 40°C. The innovative aluminium circuit board cooling technology delivers an astonishing 98% efficiency without the need for fans.
Key Features:
Adjustable Current Settings: Tailor your input and output currents from 1 to 50A with minimum steps of 0.1A via VictronConnect, matching your specific energy requirements for the most efficient performance possible. Short Circuit Protection: Engineered for safety, the Orion XS 1400 withstands unexpected electrical surges, protecting your system with comprehensive electronic protections including overload and excessive temperature safeguards. Precise Current and Power Measurements: Integrated monitoring allows you to track energy usage with accuracy, helping you make informed decisions about your power consumption.
- Adaptive Three-Step Charging: Optimizes the charging process, prolonging battery life, and reducing maintenance costs, with an intelligent adaptive 4-stage charge algorithm for lead-acid batteries.
- Power Supply Mode: Function as a standalone power supply, providing reliable energy with a wide input and output voltage range.
- Recovery Function: Intelligent recovery system extends battery life, including low temperature shutdown and input undervoltage protection to prevent damage.
- Convenient Remote Operation: Manage power settings from a distance with remote on/off capabilities and advanced monitoring and control via the VE.Direct port.
- Input Voltage Lock-Out: Ensures operation within safe voltage parameters, safeguarding your equipment.
- Connectivity and Monitoring: Stay connected with the VictronConnect App for real-time adjustments and monitoring via Bluetooth.
The robust IP65 casing ensures durability in many environments, making it the ideal choice for applications with occasional clean water splashes. Whether dealing with Euro 5 or Euro 6 smart alternators or long cable runs, the Smart BuckBoost provides precise, controlled charging to fully charge the service battery while protecting the starter/input battery from discharge.
Elevate your energy management today with the Orion XS 1400 and experience a seamless, efficient, and safe power solution.
Streamlined Design for Easy Integration
The Orion XS 1400 delivers exceptional performance and boasts a design that facilitates easy installation and safety. Its compact enclosure ensures a consistent fit within your existing setups, promoting a tidy and professional arrangement.
Enhanced Safety with Protective Terminal Cover
With safety at the forefront, the Orion XS 1400 features a protective terminal cover to prevent accidental contact and ingress of dust and debris, complemented by clear, accessible labels for correct connections.
By integrating these thoughtful design elements, the Orion XS 1400 guarantees a seamless and safe user experience, solidifying its status as a superior choice for discerning power system users.
Recommended Fuse and Cable Size
To ensure optimal safety and performance, please refer to the table below for recommended fuse and cable sizes:
| Configuration | Input Fuse | Output Fuse | Typical Input Cable Size | Typical Output Cable Size |
|---|---|---|---|---|
| 12V to 12V (50A) | 70A | 60A | 6 B&S (4 B&S for long runs) | 6 B&S |
| 12V to 24V (25A) | 70A | 30A | 6 B&S (4 B&S for long runs) | 8 B&S or 6 B&S |
| 24V to 12V (50A) | 40A | 60A | 6 B&S (8 B&S for short runs) | 6 B&S |
| 24V to 24V (50A) | 70A | 60A | 6 B&S (4 B&S for long runs) | 6 B&S |
Embrace the innovative Orion XS 1400, equipped with Bluetooth Smart for wireless updates and settings adjustments, and a VE.Direct port for wired connections, ensuring you're always in control of your power management.
SPECIFICATIONS
Specifications
| Orion XS 1400 DC-DC Battery Charger | 1400 |
|---|---|
| Input voltage range | 9-35 V |
| Output voltage adjust range | 10-35 V |
| Output voltage tolerance | +/- 0.25% (max) |
| Output voltage noise | 10 mV rms |
| Input and output current setting range | 1 – 50 A |
| Maximum constant short-circuit current | 50 A |
| Continuous output power up to 40°C¹ | 1400 W |
| Maximum efficiency | 98.5 % |
| No-load current consumption | < 100 mA |
| Standby current consumption | < 1.5 mA |
| Communication ports | |
| Bluetooth Smart | Yes |
| VE.Direct | Yes |
| Other | |
| Operating temperature range | -20 to +60 °C (derating 1.5 % per °C above 40°C) |
| Humidity | Max. 95 % non-condensing |
| DC connection | Screw terminals |
| Maximum cable cross-section | 25 mm² (AWG4) |
| Weight | 0.520 kg (0.73 lb) |
| Dimensions hxwxd | 138.1 x 124.4 x 53 mm (5.44 x 4.9 x 2.1 inch) |
| Protection category | IP65 |
| Standards | |
| Safety | IEC 62477-1 |
| Emission | IEC 61000-6-3, EN 55014-2 |
| Immunity | IEC 61000-6-2, IEC 61000-6-1, EN 55014-2 |
| Automotive Directive | ECE R10-5 |
| ¹ | This applies to optimal cooling where the product is mounted as indicated in the manual with sufficient free space. In case of limited cooling, e.g. due to insufficient airflow, the charging current will be regulated back sooner. With an improved airflow (e.g. forced airflow), derating will take place far above tamb 40°C. |
| SKU: | Vic-ORI242417040 |
| Barcode: | 8719076064848 |
| Model #: | ORI242417040 |
| MPN: | ORI242417040 |
WARRANTY
Victron Energy Limited Warranty Policy
Direct Customers
Victron Energy provides the following warranty to any direct customer (OEM, distributor or dealer) in relation to any products that Victron Energy has directly sold to the direct customer. This warranty is not an end-user warranty between Victron Energy and an end-user, and end-users shall not have any rights or remedies under this limited warranty towards Victron Energy directly. The direct customer shall, in turn, ensure that the end-user is provided with a warranty identical to this warranty, subject to applicable local mandatory law.
End-Users
Victron Energy may also provide a warranty directly to end-users, in which case the below warranty conditions equally apply to such warranty. In that case, end-users shall claim their warranty at their place of purchase or through the original direct customer of Victron, which can be found through the support section on Victron’s website https://www.victronenergy.com/support. Hence, the direct customer shall on behalf of Victron Energy deal with any warranty claims made under any warranty that Victron Energy may provide directly to end-users. This support section on Victron’s website https://www.victronenergy.com/support will provide further guidance on the procedure for end-users to make a claim under this limited warranty.
If the end-user is a consumer – a natural person who is acting for purposes which are outside that person's trade, business, craft or profession – the following applies. The rights and remedies granted to the consumer under this limited warranty are without prejudice to the consumer’s statutory rights. Furthermore, the consumer is entitled by law to remedies from the seller free of charge in the event of a lack of conformity of the goods (such as repair, replacement, price reduction or rescission), which remedies are not affected by this limited warranty.
Warranty
Victron Energy warrants its products to be free from defects in workmanship and materials for a period of 5 years from the date of purchase by the original end-user, with a maximum of 66 months from the Victron Energy invoice date. Exceptions on this are: lead-acid batteries: 2 years from date of purchase by the original end-user, with a maximum of 30 months from the Victron Energy invoice date, Lithium batteries: 3 years from date of purchase by the original end-user, with a maximum of 42 months from the Victron Energy invoice date. In addition to this, proof of correct battery usage is required when making a battery warranty claim.
For a 10% surcharge on the current net price for products that came with a 5-year warranty, an additional 5 years of warranty can be purchased by Victron’s direct customers, bringing the total warranty to 10 years. Warranty extensions need to be applied for ultimately one year before the expiration of the original term. Victron may ask proof that the product was still functional at the time of purchase of the extended warranty.
During the warranty period, Victron Energy will, at its discretion, repair, replace or (partly) credit the defective product free of charge. The warranty does not include performing or reimbursing de‐installation, transportation, and re‐installation.
This warranty will be considered void if the unit has suffered any physical damage or alteration, either internally or externally, and does not cover damages arising from improper use like:
- Reversed battery polarity.
- Inadequate connection.
- Mechanical shock or deformation.
- Contact with liquid or oxidation by condensation.
- Use in an inappropriate environment (dust, corrosive vapour, humidity, high temperature, biological infestation, etc.).
- Breakage or damage due to lightning.
- Connection terminals and screws destroyed or other damages, like overheating, due to insufficient tightening.
- For any electronic breakage except due to lightning (reverse polarity, over‐voltage due to external cause), the state of the internal control diode and/or the input/output X and Y capacitors determine the warranty.
This warranty will not apply where the product has been misused, neglected, improperly installed, or repaired by anyone other than Victron Energy or one of its authorized Repair Centres. In order to qualify for the warranty, the product must not be disassembled or modified.
This warranty and our warranty obligations thereunder (repair, replacement or credit) are the direct customer’s and, if applicable, the end-user’s sole rights and remedies and our sole obligations with respect to any defective and/or non-conforming product or breach of warranty and is subject to and without prejudice to the limitations of liability in this warranty.
Victron Energy shall not be liable for damages, whether direct, incidental, special, or consequential, even caused by negligence or fault.
As a product requires service, it must be brought back to the place of purchase. In case no contact can be made with the merchant, or if he is either unable or not allowed to provide service, direct contact should be made with Victron Energy through the support section on Victron’s website.
In case Victron Energy replaces a product, it will own the replaced product. Victron Energy owns all parts removed from repaired products. Victron Energy uses new or reconditioned parts made by various manufacturers when performing warranty repairs or building replacement products.
If Victron Energy repairs or replaces a part of a product, its warranty term is not extended: the warranty will apply for the remaining term of the original warranty term. For example, if Victron Energy replaces a product with a 5-year warranty after 3 years, the warranty of this product will apply for another 2 years, with a minimum of 6 months.
All remedies and the measure for damages are limited to the above. Victron Energy shall in no event be liable for consequential, incidental, contingent or special damages, even if having been advised of the probability of such damages.
The foregoing limited warranty provided by Victron Energy is in lieu of any other warranties, express or implied arising by law, course of dealing, course of performance, usage of trade or otherwise, of any kind whatsoever including, without limitation, warranties of merchantability or fitness for a particular purpose, with respect to any product. The above is without prejudice to the arrangement for consumers detailed above.
Life Support Policy
As a general policy, Victron Energy does not recommend the use of any of its products in life support applications where failure or malfunction of Victron Energy's product can be reasonably expected to cause the failure of the life support device or to significantly affect its safety or effectiveness. Victron Energy does not recommend the use of any of its products in direct patient care. Victron Energy will not knowingly sell its products for use in such applications unless it receives in writing assurances satisfactory to Victron Energy that the risks of injury or damage have been minimized, the customer assumes all such risks, and the liability of Victron Energy is adequately protected under the circumstances.
Warranty on repairs for products outside their warranty period
The warranty period on products that are outside their warranty period and have been repaired by Victron Energy or one of the Victron Energy Repair centres is six (6) months from delivery. The same applies to spare parts and circuit boards that have been supplied or repaired by Victron Energy.
Transport
It is the responsibility of the sender to sufficiently package these products. The transport must be organized in a way to avoid any damage, especially when a single unit or heavy unit is sent.
Severability
If a part of the terms and conditions of this warranty is held invalid, void or unenforceable due to any particular national or international legislation, it shall not affect other parts of the terms and conditions of this warranty.
Applicable law
This warranty is exclusively governed by the laws of the Netherlands, to the exclusion of the UN Convention on Contracts for the International Sale of Goods.
Contact details
Victron Energy B.V. | De Paal 35, 1351 JG Almere, The Netherlands | https://www.victronenergy.com/support

















































