CZone 3.3V ON/OFF Push Button with Red LED

Dedicated Tactile Switching for CZone Digital Control Networks

Marine-Grade Stainless Steel Construction with Integrated Status Illumination

When building or upgrading a sophisticated digital switching network, reliable physical overrides and tactile control points remain essential. The CZone 3.3V ON/OFF Push Button with Red LED provides a dedicated, professional-grade interface engineered exclusively for integration with CZone systems. Unlike standard automotive switches that can fail prematurely in harsh conditions or cause voltage mismatch issues with digital modules, this purpose-built switch operates natively at 3.3V to communicate seamlessly with your CZone Switch Control Interface (SCI) or Output Interface modules.

Designed for both marine vessels and premium recreational vehicles, this switch combines a sleek, modern aesthetic with rugged durability. The integrated red LED ring provides clear, immediate visual feedback on circuit status, reducing the guesswork during night navigation or in dimly lit cabin environments.

Engineered for Harsh Environments

Electrical components in marine cockpits, flybridges, and off-road camper trailers are frequently subjected to moisture, salt spray, and dust. Standard switches often suffer from internal corrosion and sticky actuation over time. This CZone push button mitigates those risks through its high-grade stainless steel body and IP67 environmental protection rating. Sealed against dust ingress and capable of withstanding temporary water immersion, it ensures long-term switching reliability where lesser components fail.

• Exclusive CZone Compatibility: Operating at 3.3V, it is specifically designed to interface directly with CZone digital switching systems without requiring step-down resistors.
• IP67 Environmental Rating: Sealed construction protects internal contacts from dust, moisture, and salt spray in exposed helm or exterior panel installations.
• Durable Stainless Steel Body: Provides superior corrosion resistance and a clean, modern finish that complements contemporary dash layouts.
• Flexible Actuation Support: Supports both momentary and latched switching configurations, programmable via your CZone system configuration to suit pumps, lighting, or horn circuits.
• Standardised Installation: Fits cleanly into a standard 19mm mounting hole and secures firmly with the included hexagonal mounting nut.
• Quick-Connect Termination: Features rear spade terminals for straightforward, secure wiring into your switch harness.

Critical System Compatibility

To prevent component damage and ensure proper network operation, please note that this push button is engineered for use with CZone systems only. Because the internal LED and switching logic are rated specifically for 3.3V digital signal applications, wiring this button directly to a traditional 12V or 24V DC load without a CZone interface will damage the LED and void the product warranty. Always connect via the appropriate CZone module using the rear spade terminals.

Versatile Panel Integration

Whether you are fitting out a custom helm station on a boat or centralising auxiliary power controls in a luxury caravan, this switch offers versatile functionality. Depending on how you program your CZone system, the button can operate as a latched switch for continuous loads like cabin lighting and navigation electronics, or as a momentary switch for bilge pump overrides and windlass control. The recessed button profile helps prevent accidental activation in rough seas or over corrugated tracks.

Upgrade Your Control Panel

Ensure your digital switching network is backed by hardware built to the same exacting standards. Add the CZone 3.3V ON/OFF Push Button to your system specification today for dependable, weather-resistant circuit control.