Western Co. WRD Remote DisplayUse with Western Co. WBM Battery Monitor
Free AusPost shipping for orders over $100 on most items to most areas. Calculate shipping in cart for more details.
The WRD is a display and controller device that allows the recording of historical operating data with remote control from the Internet (cloud).
It is possible to put in parallel up to 8 WRM30+ or WRM20+ MPPT controllers with modular charging power up to 14kW and monitor the energy of the battery bank through the WBM battery monitor. The WRD is suitable for 12/24/48V systems with lead-acid or lithium batteries.
The simple user interface, at 128x64 pixel resolution display and 4 buttons, allows an immediate view of all parameters: powers, voltages, charge and PV string currents, energy meters, logger data and events. From the WRD you can make all the setup settings for each single WRM20+/WRM30+ controller connected and/or WBM battery monitor. Through the WBM it is possible to manage contacts related to the state of charge of the battery for the intelligent activation of loads.
The removable memory card on the front panel stores the data of the logger. With the ethernet connection it is possible to connect to the cloud internet so that both the data of the logger and all other functions become remote and accessible with the web interface of the WRM Monitor portal.
As a manufacturer of photovoltaic electronic systems, Western CO. S.r.l. offers a five-year warranty in the event of defects on the entire product range. All products bearing brands other than Western CO. S.r.l. are therefore excluded from this warranty, although still marketed by the same Company.
The warranty begins on the date mentioned on the receipt confirming the purchase of the product.
The application of the warranty is subject to proven defects of the product and does not cover other defects, except those described in the warranty conditions specified in the manual of each product.
To guarantee means only the free repair or replacement, at the discretion of WESTERN CO. LTD, including labor, the faulty parts recognized in manufacturing or material.
Are excluded from the warranty: parts subject to wear following use, the batteries (if provided), cables, and the connection cords, connectors, external parts and the plastic supports which do not show manufacturing defects.
This warranty does not cover faults caused by overvoltage or overcurrent, failure of equipment that you have tampered with, or tampering with the seal of guarantee or damaged by the customer, etc.
In all these cases, even with a valid warranty certificate, the equipment will be repaired at the expense of the Customer prior notification and authorization.
Technical assistance under warranty (within 5 years from date of purchase) is provided at the only service center WESTERN CO. LTD.
To get a warranty repair, you must complete and submit the form “Request for Technical Assistance” in all its parts and complete the serial number of the product, together with a copy of the sales receipt.
For the full range of charge controllers, in addition to the traditional Technical Assistance mode it joins the new mode called “Swap Repair” (Advance Replacement).
This mode allows the immediate replacement of the defective product with a similar product regenerated, in order to eliminate the waiting time of the repair.
At the expiration of the warranty period (5 years) or decay of one of the causes that give the right to the guarantee, assistance interventions will be made with the charging of the costs incurred for the replaced parts and labor costs, according to the rates in force exhibited in the Technical Assistance points.