Wakespeed WS500 Battery Temperature Sensor, 3m cable

For lead-acid and non CAN-enabled lithium batteries

$61.00
In Stock
Wakespeed logo

Enjoy free AusPost shipping for orders over $100 on most items, including our Wakespeed WS500 Battery Temperature Sensor, 3m cable, to the majority of areas. Check your shipping details on the cart page for more information.

For use with:  Wakespeed WS500 Advanced Alternator Regulator

Included:

  • 3m cable with Superseal 1.5 to mate with "blue covered" connector on WS500 loom.   8mm "eye" lug for attachment to battery terminal or placement at the battery.  

Note, if 3m cable is insufficient, an 8m cable version is also available:

Essential for proper charge control in lead-acid and non CAN-enabled LiFeP04 battery technologies, the WS500/BT battery temperature sensor enables the regulator to access battery temperature to assist in temperature compensation when determining charging calculations. The battery temperature sensor is also an important component to protect against damage due to charging outside of safe temperature setpoints.

(WS-WS500-BT-K)

SKU WS-WS500-BT-K
MPN # WS-WS500-BT-K

1 year


More From This Category