Wakespeed replacement WS500 alternator temperature sensor, 0.3m cable

For lead-acid and non CAN-enabled lithium batteries

$46.00
In Stock
Wakespeed logo

Enjoy free AusPost shipping for orders over $100 on most items, including our Wakespeed replacement WS500 alternator temperature sensor, 0.3m cable, to the majority of areas. Check your shipping details on the cart page for more information.

For use with:  Wakespeed WS500 Advanced Alternator Regulator

Included:

  • -.3m cable with Superseal 1.5 to mate with "blue covered" connector on WS500 loom.   8mm "eye" lug for attachment to battery terminal or placement at the battery.  

Note, if 0.33m cable is insufficient, a 3m and 8m alternatives are also available:

Essential for proper charge control in lead-acid and non CAN-enabled LiFeP04 battery technologies, the WS500-AT01 temperature sensor enables the regulator to access the alternator temperature so it can prevent too high alternator temperature. The alternator temperature sensor is the same sensor as used for the battery.

(WS-WS500-AT01)

SKU WS-WS500-AT01
MPN # WS-WS500-AT01

1 year


More From This Category