Tapes

Tape is recommended for adhering flexible solar panels to a caravan roof or boat deck or solid canopy.

The tapes below are strong and highly elastic to minimise stress on the solar panel that can be caused by differential thermal expansion or movement.  

The tapes conforms to rough, textured surfaces and has a wide range of applications for joining, sealing waterproofing and vibration absorption.

 

RADpower Acrylic Very High Bond (VHB) tape

This versatile and very strong tape is not only exellent quality but also excellent value. 

The strength of this tape has been tested in-house under a variety of conditions including extreme cold and heat. 

We recommend using very high bond tape to ensure the thermal expansion between the panels and the substrate is accommodated.

Butyl High Bond double-sided mounting tape

The high bond Butyl tape is suitable for a strong bond on horizontal applications such as roofs and decks.  The high water-resistant butyl rubber adhesive coated on a polyethylene net gives it dimensional stability with a siliconised white paper release liner.  

 

3M Very High Bond (VHB) tape

As well as roofs and decks 3M VHB tape can be used for vertical appications such as installing controllers/regulators and other equipment and flexible solar panels on the front section (bullnose) of motorhomes and trailers. 

The strength of this tape has been tested in-house under a variety of conditions including extreme cold and heat. 

We recommend using very high bond tape to ensure the thermal expansion between the panels and the substrate is accommodated.

 

How to use very high bond tape

Cross-cut strips of twin wall polycarbonate allows air flow under the panel from any direction and the use of strips provides around 90% of the underside of the cells exposed directly to air circulation.

polycarbonate strips with very high bond tape attached for attaching flexible solar panels         how to attach twinwall polycarbonate strips to a solar panel - copyright image

 

Tape is the most effective method of attaching the twinwall polycarbonate sheeting to the underside of the solar panel and to the RV, vehicel, boat surface.

Detailed instructions are provided with all flexible solar panel purchases

 

Edge Flashing tape

“FlexiFlash” Acrylic Film single sided edge flashing tape can be used to provide a waterproof and dustproof sealed edge or covering.  For example over tabbing wire

It has excellent conformability and the tape's flexibility allows it to adhere easily to a wide range of surfaces.

It is structurally resilient to environmental factors such as UV and humidity, making this product ideal for exterior applications.

 

 






Butyl Tape high bond double sided 10m roll

White 1.5mm thick x 20mm wide x 10M length roll

$16.00
$145.00
$160.00

3M™ Tape Primer 94 946ml

Improves wettability of low surface energy materials

$150.00

3M Tape Primer 94 0.66mL ampoule

Improves wettability of low surface energy materials

$3.00

Edge Flashing tape 6m roll Flexiflash

Clear single sided 35mm wide x 6m length long

$32.00

Edge Flashing tape 25m roll Flexiflash

Clear single sided 35mm wide x 25m length roll

$87.00