Remote LCD Display (Solar ComputerS) for Votronic MPP controllers

includes 5m cable

Provides precise reading of solar charging current, battery voltage, power and the Amp-hrs and the Watt-hrs. Optional casing/housing available. Made in Germany.

In Stock

Calculate Shipping

Enter qty and post code to calculate:

Australia Post Express Satchel - Large - $25.00
Express satchel: Australia Wide via Australia Post including to PO Boxes & Post Offices

Provides precise reading of solar charging current, battery voltage, power and the Amp-hrs and the Watt-hrs. Optional casing/housing available. Made in Germany.

How much energy does my solar system really supply? Are the solar modules shaded or dirty or is something wrong?

The VOTRONIC solar power measurement unit gives the answer to these questions.

When being plugged into the VOTRONIC solar charging controllers of series SR and MPP, the desired information is given comprehensively and immediately. The solar display can be connected to the controller at any time, also subsequently, since the VOTRONIC solar charging controller is ready for connection to produce the required signals. Thus, the connection is extremely simple.

The clear arrangement of the measuring values on the display and the easy operation with pushing the button allow improved control and use of the solar system. The instantaneous solar power is also displayed as bar graph allowing the control at a glance.

The display is equipped with a background illumination (switchable). So, the legibility of the values is very well, even at a great distance and with all lighting conditions. Matching to the VOTRONIC modular system, the digital display is executed as panel version. Appearance and mechanic (identical height 85 mm) are adapted to the other display modules.

The small dimensions of the front panel and the particularly small mounting depth of only 18 mm allow an installation at almost any location. If flush mounting of the LCD display is not desired, a corresponding casing is available as accessory.

The unit is ready for connection to the solar controllers. A connection cable of 5m length is included with the unit.


A microprocessor control measures, calculates and displays the following values:

  • Instantaneous solar power 0 - 999 W (Watt)
  • Instantaneous solar current 0 - 60,0 A (Ampere)
    Any geographic or atmospheric influences will be displayed immediately and unmistakable.
    The same applies to the exposure of the sun, partial shading or soiling of the solar modules.
  • Instantaneous voltage of the solar battery 7 - 32,0 V (Volt)
    Allows conclusions concerning the battery state; flashing warning signal in case of undervoltage and overvoltage of the battery.
  • Charged solar capacity 0 - 9999 Ah (Ampere-hours)
  • Charged solar energy 0 - 9999 kWh (Kilowatt-hours)
    The power (Wh and kWh) being generated by the solar modules and the capacity (Ah) being charged into the battery will be measured, added up and displayed, even over a longer period (days, weeks). If it is required for purposes of statistics, each of the display units can be reset to "zero" at any time.

Nominal Voltage (DC) in [V]

  12 and 24
 Current Consumption max. in [mA] 3 - 30 (depending on illumination)
 Display LC Display with specific segments
 Display-Functions W, A, V, Ah, Wh
 Measuring Range [Wp] 20 - 990
 Dimensions (WxDxH) in [mm] 80 x 85 x 25
 Assembly Dimensions (WxDxT) in [mm] 66 x 72 x 22
 Weight in [g] 55
 Mark of conformity CE, E-Test (EMV/Automotive Regulations)
 Ambient Conditions, Humidity of Air:  max. 95 % RH, No Condensation
 Delivery Scope: Connection Cable 5m, Fastening Screws, Operating Manual, Drilling Jig


SKU Vot-1250

Product Function and Performance

Product Weight and Dimensions

Shipping Weight and Dimensions

Shipping Weight 0.2800kg
Shipping Width 0.140m
Shipping Height 0.060m
Shipping Length 0.210m
Shipping Cubic 0.001764000m3

2 years

Others Also Bought

More From This Category