REC BMS Q16S Electronic Unit for 4-16 cells

In Stock

Calculate Shipping

Enter qty and post code to calculate:

Australia Post Express Satchel - Large - $25.00
Express satchel: Australia Wide via Australia Post including to PO Boxes & Post Offices


  • robust and small design
  • 5 – 16 cells
  • single cell voltage measurement (0.1 – 5.0 V, resolution 1 mV)
  • single cell - under/over voltage protection
  • single cell internal resistance measurement
  • SOC and SOH calculation
  • over/under temperature protection (up to 4 temperature sensors)
  • passive cell balancing 4.3 Ω
  • 18-bit shunt current measurement (resolution 7.8 mA @ ± 200 A)
  • galvanically isolated user defined multi-purpose digital output
  • programmable relay (normally open)
  • galvanically isolated RS-485  communication protocol
  • CAN Bus communication
  • error LED + buzzer indicator
  • hibernate switch
  • 1 s measuring interval
  • balancing transistors defect check @ restart
  • EEPROM memory data corruption check @ restart
  • cell's voltage RMS voltage measurement
  • self calibration @ restart
  • BMS shutdown @ 0.98 x minimum cell disconnect threshold
  • Ah counting

Data communications

RS485 protocol and messages are fully defined in manual - can be programmed using Hyperterminal or similar

RS485 message checksum is CRC-16   0x8005   x16 +x15 +x2 + 1

CAN Bus messages are fully defined in manual

PC Master Control Software

Available as an option






Product Function and Performance

Product Weight and Dimensions

Shipping Weight and Dimensions

Shipping Weight 0.6000kg
Shipping Width 0.180m
Shipping Height 0.060m
Shipping Length 0.250m

1 Year

Others Also Bought

More From This Category