{"product_id":"cms-c3-1-to-iec-c20-inverter-output-cable-600mm-90-2-5mm","title":"CMS C3.1 to IEC C20 Inverter Output Cable 600mm 90° 2.5mm","description":"\u003ch2\u003eAS\/NZS 3001.2:2022 Compliant Inverter Output Lead for Mobile Power Systems\u003c\/h2\u003e\n\u003cp\u003eDesigning a compliant and reliable 230V AC electrical system in a caravan, motorhome, or off-grid canopy requires components that meet strict Australian standards. The \u003cstrong\u003eCMS Electracom C3.1 to IEC C20 Inverter Output Cable\u003c\/strong\u003e provides a secure, plug-and-play bridge between your inverter's IEC outlet and a modular CMS C3.1 electrical distribution system. Engineered with a heavy-duty 2.5mm² cross-sectional core and rated up to 16A, this 600mm assembly removes the need for custom hardwiring at the inverter interface while maintaining full regulatory compliance.\u003c\/p\u003e\n\n\u003ch3\u003eEngineered for Tight Clearances and High-Vibration Environments\u003c\/h3\u003e\n\u003cp\u003eSpace inside modern RV electrical cabinets and 4WD canopies is often heavily restricted. Standard straight-profile IEC plugs require substantial clearance behind or beside the inverter chassis, frequently resulting in sharp cable bends that place mechanical strain on the internal copper conductors and the inverter's socket. This lead addresses that challenge directly with a purpose-built \u003cstrong\u003e90° right-angle IEC C20 male plug\u003c\/strong\u003e. By routing the cable flush along the body of the inverter, it minimises the required installation depth and significantly reduces physical strain on the connection point during off-road travel.\u003c\/p\u003e\n\u003cp\u003eOn the opposing end, the standard C3.1 female connector integrates directly into CMS Electracom's modular wiring architecture, complete with a removable protective dust cap to keep the terminal contacts clean during rough-in and routing prior to final commissioning.\u003c\/p\u003e\n\n\u003ch3\u003eFull Compliance with AS\/NZS 3001.2:2022\u003c\/h3\u003e\n\u003cp\u003eRecent updates to the \u003cstrong\u003eAS\/NZS 3001.2:2022 Electrical Installations (Connectable Electrical Installations and Supply Arrangements)\u003c\/strong\u003e standard mandate rigorous requirements for transportable structures. Utilizing uncertified leads or undersized wiring in high-load 230V AC inverter circuits introduces serious thermal risks and can void insurance or fail compliance inspections. This CMS Electracom assembly is manufactured with \u003cstrong\u003e2.5mm² conductors\u003c\/strong\u003e specifically specified to satisfy AS\/NZS 3001.2:2022 requirements for inverter output connections. Rated for a maximum current of 16A (*Note typical de-rating factors apply), it ensures safe current delivery from high-output inverters to your main switchboard or RCD distribution unit.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features and Technical Advantages\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAS\/NZS 3001.2:2022 Compliant:\u003c\/strong\u003e Constructed with heavy-duty 2.5mm² cable to meet modern Australian and New Zealand regulatory standards for connectable vehicles and transportable structures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpace-Saving 90° IEC C20 Plug:\u003c\/strong\u003e Right-angle male connector reduces protrusion from the inverter housing, preventing cable pinching and terminal stress in compact enclosures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e16A Current Rating:\u003c\/strong\u003e Matched to the thermal and electrical limits of standard IEC C20 inverter outlets for dependable AC power transfer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModular C3.1 Integration:\u003c\/strong\u003e Connects seamlessly with CMS Electracom C3.1 series interconnects, RCD modules, and double-pole outlet networks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e600mm Point-to-Point Length:\u003c\/strong\u003e Ideal for close-proximity installations where the inverter is mounted adjacent to the AC distribution board, eliminating excess cable clutter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminal Protection:\u003c\/strong\u003e Supplied with a removable dust cap on the C3.1 connector to prevent debris ingress during installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eIdeal Applications\u003c\/h3\u003e\n\u003cp\u003eThis pre-terminated inverter output assembly is suited for trade installers, OEM caravan manufacturers, and system builders working on:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCaravans, camper trailers, and motorhomes requiring certified 230V AC inverter integration\u003c\/li\u003e\n\u003cli\u003eCommercial service vehicles and mobile workspaces utilizing high-capacity inverters\u003c\/li\u003e\n\u003cli\u003eCompact 4WD canopy power systems where cabinet depth restricts standard straight IEC plugs\u003c\/li\u003e\n\u003cli\u003eModular off-grid power boards built around the CMS Electracom C3.1 architecture\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eStreamline Your Inverter Installation\u003c\/h3\u003e\n\u003cp\u003eEliminate the guesswork and compliance risks of custom AC wiring. Add the CMS Electracom C3.1 to IEC C20 90° Inverter Output Cable to your system build for a tidy, compliant, and durable 230V AC connection.\u003c\/p\u003e","brand":"CMS Electracom","offers":[{"title":"Default Title","offer_id":43631797567549,"sku":"CMS-IEC-OUT-R","price":56.63,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0602\/3918\/3933\/files\/cms-c3-1-to-iec-c20-inverter-cable-600mm-cms-iec-out-r.jpg?v=1792906055","url":"https:\/\/www.solar4rvs.com.au\/products\/cms-c3-1-to-iec-c20-inverter-output-cable-600mm-90-2-5mm","provider":"Solar 4 RVs","version":"1.0","type":"link"}