In-line smart blocking diode

Blocking diode

In Stock

Calculate Shipping

Enter qty and post code to calculate:

Aus Post Express 500g Satchel (Overnight) - $11.00
Australia Wide via Australia Post including to PO Boxes & Post Offices

The voltage drop of this low loss diode is 26mV at 8A which is about 5% that of a typical Schottky type diode


Maximum Reverse Voltage (VR) of 30 V
• Operating Forward Current (IF) of up to 15 A
• Low Average Forward Voltage (26 mV at 8 A)
• Less Power Dissipation than Schottky Diode
• Lower Leakage Current than Schottky Diode


Genuine Multicontact MC4


PV1-F 4mm2

Suitable for solar panels:

Suitable for all RADpower (& other) panels not exceeding 30V open circuit.  This includes all RADpower standard stock panels except the 150W, 44 cell panel which uses GenIII Sunpower cells.  Note that the maximum open circuit voltage occurs at low temperatures.


Suitable for marine environment with caveat as follows.    The diode is soldered directly to the cable and enclosed in a double layer of dual wall (glued) heatshrink; therefore the diode cable assembly should therefore be used in a static situation so that there is no repetitive mechanical stress on the diode connections.




Product Function and Performance

Product Weight and Dimensions

Shipping Weight and Dimensions

Shipping Weight 0.1500kg
Shipping Width 0.200m
Shipping Height 0.030m
Shipping Length 0.150m
Shipping Cubic 0.000900m3

Others Also Bought

More From This Category