85W, White, ETFE Textured, Slim Junction Box 940x545mm

FREE Installation Kit with purchase

WAS $276.00
RRP $276.00
NOW $220.00
SAVE 20%!
Sale Ends in
00:00 am, 31 December 2018
In Stock


Calculate Shipping

Enter qty and post code to calculate:

Installation requirements

  1. These panels must be installed with an air gap directly the panel under to limit the upper operating temperature of the panel.
  2. The mounting surface or roof must also be rigid, for example:
  • Composite panel of rigid foam with a fibreglass or aluminium skin/surface
  • Rigid metal (not thin that can flex with temperature)

Contact Solar 4 RVs for any other surface.

  1. The air gap can be created as shown below.  Twin-wall polycarbonate can be cut into strips with a very sharp Stanley knife at most 500mm long with 3 complete flutes as shown below.  The limit of 500mm and “expansion gaps” between the strips minimises stress on the panel due to thermal expansion and cycling.

 

 

 

Attach 3M 4941 tape to top and bottom of the TWP as shown below:

 

Attach the strips to the underside of the panel as shown below:

 

 

Use fasteners at the corners of the leading edge of each panel to prevent the tendency of the front edge lifting at highway speeds.The white space in the corner panels and between cells can be used for this – thoroughly apply silicone to prevent moisture ingress.

 

 

Aluminium channel may be used instead of the TWP shown here.

 

It is a requirement that these panels are installed as described.  This method includes an air gap to reduce thermal expansion which stresses the panel thus maximising service life and minimising the possibility of premature failure of the panels.

(RP85S)

RADpower Premium
Sizes Weight Number of Cells Voc - Open Circuit Voltage Vmp - Maximum Power Voltage Imp - Maximum Power Voltage Isc -Short Circuit  Current
85W 1.8 28 18.5 15.7 5.6 6.1

SKU

SKU RP85S

Product Function and Performance

Product Weight and Dimensions

Weight 1.9kg
Unit Length 0.940m
Unit Height 0.019m
Unit Width 0.545m

Shipping Weight and Dimensions

Shipping Weight 2.1000kg
Shipping Width 0.555m
Shipping Height 0.019m
Shipping Length 0.950m
Shipping Cubic 0.010018m3

1 year


You May Also Like



Others Also Bought


18W - Black; 434x277x3mm; junction box underneath; no eyelets
On Sale 34% OFF RRP $106.00
30W - Black; 535x386x3mm; with solder tabs underneath; eyelets
On Sale 44% OFF RRP $143.00
CP144Q: 1046x996x2mm; smooth surface, junction box on top, Solbian
On Sale 30% OFF RRP $990.00
18W White; 434x277x3mm; tabs under, no eyelets
On Sale 34% OFF RRP $106.00
60W Black ETFE, Textured, panel Slim Junction Box 760x560mm
On Sale 20% OFF RRP $211.00

More From This Category


135W - Black, ETFE, Textured, Solder tabs underneath 1442x540x3mm
On Sale 20% OFF RRP $437.00
120W  - Black, ETFE, Textured, Solder tabs underneath 1310x545x3mm
On Sale 20% OFF RRP $402.00
100W Black, ETFE, Textured, Solder tabs underneath 1050x540mm
On Sale 20% OFF RRP $336.00
85W Black ETFE. Textured, Solder tabs underneath 930x540mm
On Sale 20% OFF RRP $276.00
75W - Black, ETFE, Textured; solder tabs underneath, 1038x393x3mm, 3 cell wide
On Sale 20% OFF RRP $255.00
60W Black ETFE, Textured, panel Slim Junction Box 760x560mm
On Sale 20% OFF RRP $211.00
30W White, ETFE, Textured, Slim Junction Box, 4m Cable 535x386mm
On Sale 20% OFF RRP $143.00
18W Black, ETFE, Textured, Slim Junction Box 434x277mm
On Sale 20% OFF RRP $106.00