120W - Black, ETFE, Textured, Solder tabs underneath 1310x545x3mm

FREE Installation Kit with purchase

Our own brand made in China to our quality specifications using high efficiency SunPower cells . Affordable without compromising on quality so great value for money.

$402.00
In Stock
Clearance stock so no back-orders available on sale items. No returns if you change your mind.


Calculate Shipping

Enter qty and post code to calculate:

Our own brand made in China to our quality specifications using high efficiency SunPower cells . Affordable without compromising on quality so great value for money.

Installation requirements

  1. These panels must be installed with an air gap directly the panel under to limit the upper operating temperature of the panel.
  2. The mounting surface or roof must also be rigid, for example:
  • Composite panel of rigid foam with a fibreglass or aluminium skin/surface
  • Rigid metal (not thin that can flex with temperature)

Contact Solar 4 RVs for any other surface.

  1. The air gap can be created as shown below.  Twin-wall polycarbonate can be cut into strips with a very sharp Stanley knife at most 500mm long with 3 complete flutes as shown below.  The limit of 500mm and “expansion gaps” between the strips minimises stress on the panel due to thermal expansion and cycling.

 

 

 

Attach 3M 4941 tape to top and bottom of the TWP as shown below:

 

Attach the strips to the underside of the panel as shown below:

 

 

Use fasteners at the corners of the leading edge of each panel to prevent the tendency of the front edge lifting at highway speeds.The white space in the corner panels and between cells can be used for this – thoroughly apply silicone to prevent moisture ingress.

 

 

Aluminium channel may be used instead of the TWP shown here.

 

It is a requirement that these panels are installed as described.  This method includes an air gap to reduce thermal expansion which stresses the panel thus maximising service life and minimising the possibility of premature failure of the panels.

(RP-120wP)

RADpower Premium
Sizes Weight Number of Cells Voc - Open Circuit Voltage Vmp - Maximum Power Voltage Imp - Maximum Power Voltage Isc -Short Circuit  Current
120W 2.6 40 26.4 22 5.5 6.1

SKU

SKU RP-120wP

Product Function and Performance

Product Weight and Dimensions

Weight 2.1kg
Unit Length 1.375m
Unit Height 0.019m
Unit Width 0.540m

Shipping Weight and Dimensions

Shipping Weight 3.5000kg
Shipping Width 0.540m
Shipping Height 0.019m
Shipping Length 1.375m
Shipping Cubic 0.014108m3

1 year warranty


You May Also Like



Others Also Bought



More From This Category