Quattro 48V

Two AC inputs with integrated transfer switch

Two AC inputs with integrated transfer switch, two AC outputs, can operate in parallel, three phase capability. A current limit can be set on each AC input. Can be used in off grid as well as grid connected.


Buying Options

Quantity Image Name Price
Quattro 48/10000/140-100/100 - 230V +50A aux. Inverter/Charger Victron Quattro 48/10000/140-100/100 - 230V +50A aux. Inverter/Charger Victron
Two AC inputs with integrated transfer switch
$6,280.00
In stock
Quattro 48/5000/70-100/100 - 230V +50A aux. Inverter/Charger Victron Quattro 48/5000/70-100/100 - 230V +50A aux. Inverter/Charger Victron
Two AC inputs with integrated transfer switch
$4,544.00
In stock
Quattro 48/8000/110-100/100 - 230V Inverter/Charger Victron Quattro 48/8000/110-100/100 - 230V Inverter/Charger Victron
Two AC inputs with integrated transfer switch
$5,255.00
Sold Out

Quattro

Two AC inputs with integrated transfer switch
The Quattro can be connected to two independent AC sources, for example the public grid and a generator, or two generators. The Quattro will automatically connect to the active source.

Two AC Outputs
The main output has no-break functionality. The Quattro takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on one of the inputs of the Quattro. Loads that should not discharge the battery, like a water heater for example, can be connected to this output.

Virtually unlimited power thanks to parallel operation
Up to 6 Quattro units can operate in parallel. Six units 48/10000/140, for example, will provide 54kW / 60kVA output power and 840 Amps charging capacity.

Three phase capability
Three units can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected to provide 162kW / 180kVA inverter power and more than 2500A charging capacity.

PowerControl – Dealing with limited generator, shore side or grid power
The Quattro is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (16A per 5kVA Quattro at 230VAC). A current limit can be set on each AC input. The Quattro will then take account of other AC loads and use whatever is spare for charging, thus preventing the generator or mains supply from being overloaded.

PowerAssist – Boosting shore or generator power
This feature takes the principle of PowerControl to a further dimension allowing the Quattro to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the Quattro will make sure that insufficient mains or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery.

Solar energy: AC power available even during a grid failure
The Quattro can be used in off grid as well as grid connected PV and other alternative energy systems.
Loss of mains detection software is available.

System configuring
- In case of a stand-alone application, if settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure.
- Parallel and three phase applications can be configured with VE.Bus Quick Configure and VE.Bus System Configurator software.
- Off grid, grid interactive and self-consumption applications, involving grid-tie inverters and/or MPPT Solar Chargers can be configured with Assistants (dedicated software for specific applications).

On-site Monitoring and control
Several options are available: Battery Monitor, Multi Control Panel, Ve.Net Blue Power panel, Color Control panel, smartphone or tablet (Bluetooth Smart), laptop or computer (USB or RS232).

Remote Monitoring and control
Victron Ethernet Remote, Victron Global Remote and the Color Control Panel. Data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge.

Remote configuring
When connected to the Ethernet, systems with a Color Control panel can be accessed and settings can be changed.

(Vic-Quattro48V)

SKU

SKU Vic-Quattro48V

Product Function and Performance

Product Weight and Dimensions

Weight 20kg

Shipping Weight and Dimensions

Shipping Weight 22.0000kg
Shipping Width 0.445m
Shipping Height 0.330m
Shipping Length 0.295m
Shipping Cubic 0.043321m3

5 years


Others Also Bought



More From This Category