3M Tape Primer 94 0.66mL ampoule (special order - normally dispatch within 2 days ordering)

Improves wettability of low surface energy materials

$3.00
In Stock


Calculate Shipping

MSDS:
An MSDS is attached for reference only.  The MSDS published on the 3M website at the time of ordering must be used.
 
  • Promotes adhesion to polyethylene, polypropylene, ABS, PET/PBT blends and other on difficult to stick to substrates
  • Commonly used for increasing adhesion of film and vinyl graphics in automotive detailing
  • Can be applied with brush or swab for small areas and a pressurized flow gun for larger areas
  • Dries to a clear finish
 
Brand
3M™, VHB™
Color
Clear Light Yellow
Consumer Label
No
Industries
Construction, Electronics, General Industrial, Metalworking, Signage, Transportation
Product Form
Each
Product Type
Accessory
Volatile Organic Compounds (VOCs)
See Safety Data Sheet, Regulatory Data Sheet
Volume (metric)
237 ml, 946 ml
Details

3M™ Tape Primer 94 can be used to improve the overall adhesion of tape, film and vinyl graphics to polyethylene, polypropylene, ABS, PET/PBT blends, concrete, wood, glass, metal and painted metal surfaces.

Dries in Minutes for Efficient Use 
Make sure your surface is clean and dry before applying a thin, uniform coat of 3M™ Tape Primer 94. The primed surface must remain free from contaminants prior to applying the tape. It's important to use the minimum amount of product necessary as over applying can cause sub-optimal results. Allow the primer to dry completely, which is usually accomplished in 5 minutes at room temperature, before applying tape. Special note: porous surfaces may require 2 applications for uniform coverage and good adhesion. Allow your first application of primer to dry before applying a second coat. 

Recommended Applications

  • Promote adhesion of 3M™ VHB™ Tape
  • For use on many plastic, rubber, painted and bare metal substrates

 

Application Tips 
3M™ Tape Primer 94 may be applied with a brush, swab, pressurized flow gun, knurled roller or similar type of equipment and can be removed with isopropyl alcohol. Vigorous scrubbing may be required. 

Recommended Applications

  • Promote adhesion of 3M™ VHB™ Tape
  • For use on many plastic, rubber, painted and bare metal substrates

Application Tips 
3M™ Tape Primer 94 may be applied with a brush, swab, pressurized flow gun, knurled roller or similar type of equipment and can be removed with isopropyl alcohol. Vigorous scrubbing may be required. 

 

 

 

 

 

 

(3M-PRIMER94AMP)

SKU

SKU 3M-PRIMER94AMP

Product Function and Performance

Product Weight and Dimensions

Shipping Weight and Dimensions

Shipping Weight 0.0200kg
Shipping Width 0.020m
Shipping Height 0.100m
Shipping Length 0.020m
Shipping Cubic 0.000040m3

Others Also Bought



More From This Category